| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_multiport: validate range encoding in checkentry
ports_match_v1() treats any non-zero pflags entry as the start of a
port range and unconditionally consumes the next ports[] element as
the range end.
The checkentry path currently validates protocol, flags and count, but
it does not validate the range encoding itself. As a result, malformed
rules can mark the last slot as a range start or place two range starts
back to back, leaving ports_match_v1() to step past the last valid
ports[] element while interpreting the rule.
Reject malformed multiport v1 rules in checkentry by validating that
each range start has a following element and that the following element
is not itself marked as another range start. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require 3 sub-authorities before reading sub_auth[2]
parse_dacl() compares each ACE SID against sid_unix_NFS_mode and on
match reads sid.sub_auth[2] as the file mode. If sid_unix_NFS_mode is
the prefix S-1-5-88-3 with num_subauth = 2 then compare_sids() compares
only min(num_subauth, 2) sub-authorities so a client SID with
num_subauth = 2 and sub_auth = {88, 3} will match.
If num_subauth = 2 and the ACE is placed at the very end of the security
descriptor, sub_auth[2] will be 4 bytes past end_of_acl. The
out-of-band bytes will then be masked to the low 9 bits and applied as
the file's POSIX mode, probably not something that is good to have
happen.
Fix this up by forcing the SID to actually carry a third sub-authority
before reading it at all. |
| In the Linux kernel, the following vulnerability has been resolved:
module: Fix kernel panic when a symbol st_shndx is out of bounds
The module loader doesn't check for bounds of the ELF section index in
simplify_symbols():
for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) {
const char *name = info->strtab + sym[i].st_name;
switch (sym[i].st_shndx) {
case SHN_COMMON:
[...]
default:
/* Divert to percpu allocation if a percpu var. */
if (sym[i].st_shndx == info->index.pcpu)
secbase = (unsigned long)mod_percpu(mod);
else
/** HERE --> **/ secbase = info->sechdrs[sym[i].st_shndx].sh_addr;
sym[i].st_value += secbase;
break;
}
}
A symbol with an out-of-bounds st_shndx value, for example 0xffff
(known as SHN_XINDEX or SHN_HIRESERVE), may cause a kernel panic:
BUG: unable to handle page fault for address: ...
RIP: 0010:simplify_symbols+0x2b2/0x480
...
Kernel panic - not syncing: Fatal exception
This can happen when module ELF is legitimately using SHN_XINDEX or
when it is corrupted.
Add a bounds check in simplify_symbols() to validate that st_shndx is
within the valid range before using it.
This issue was discovered due to a bug in llvm-objcopy, see relevant
discussion for details [1].
[1] https://lore.kernel.org/linux-modules/20251224005752.201911-1-ihor.solodrai@linux.dev/ |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: use netlink policy range checks
Replace manual range and mask validations with netlink policy
annotations in ctnetlink code paths, so that the netlink core rejects
invalid values early and can generate extack errors.
- CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at
policy level, removing the manual >= TCP_CONNTRACK_MAX check.
- CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE
(14). The normal TCP option parsing path already clamps to this value,
but the ctnetlink path accepted 0-255, causing undefined behavior when
used as a u32 shift count.
- CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with
CTA_FILTER_F_ALL, removing the manual mask checks.
- CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding
a new mask define grouping all valid expect flags.
Extracted from a broader nf-next patch by Florian Westphal, scoped to
ctnetlink for the fixes tree. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio
Replace BUG_ON() with proper error handling when inline data size
exceeds PAGE_SIZE. This prevents kernel panic and allows the system to
continue running while properly reporting the filesystem corruption.
The error is logged via ext4_error_inode(), the buffer head is released
to prevent memory leak, and -EFSCORRUPTED is returned to indicate
filesystem corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP
Weiming Shi says:
xt_match and xt_target structs registered with NFPROTO_UNSPEC can be
loaded by any protocol family through nft_compat. When such a
match/target sets .hooks to restrict which hooks it may run on, the
bitmask uses NF_INET_* constants. This is only correct for families
whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge
all share the same five hooks (PRE_ROUTING ... POST_ROUTING).
ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different
semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks
validation silently passes for the wrong reasons, allowing matches to
run on ARP chains where the hook assumptions (e.g. state->in being
set on input hooks) do not hold. This leads to NULL pointer
dereferences; xt_devgroup is one concrete example:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227]
RIP: 0010:devgroup_mt+0xff/0x350
Call Trace:
<TASK>
nft_match_eval (net/netfilter/nft_compat.c:407)
nft_do_chain (net/netfilter/nf_tables_core.c:285)
nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61)
nf_hook_slow (net/netfilter/core.c:623)
arp_xmit (net/ipv4/arp.c:666)
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
Fix it by restricting arptables to NFPROTO_ARP extensions only.
Note that arptables-legacy only supports:
- arpt_CLASSIFY
- arpt_mangle
- arpt_MARK
that provide explicit NFPROTO_ARP match/target declarations. |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: check metadata block offset is within range
Syzkaller reports a "general protection fault in squashfs_copy_data"
This is ultimately caused by a corrupted index look-up table, which
produces a negative metadata block offset.
This is subsequently passed to squashfs_copy_data (via
squashfs_read_metadata) where the negative offset causes an out of bounds
access.
The fix is to check that the offset is within range in
squashfs_read_metadata. This will trap this and other cases. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kalmia: validate USB endpoints
The kalmia driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Use correct version for UAC3 header validation
The entry of the validators table for UAC3 AC header descriptor is
defined with the wrong protocol version UAC_VERSION_2, while it should
have been UAC_VERSION_3. This results in the validator never matching
for actual UAC3 devices (protocol == UAC_VERSION_3), causing their
header descriptors to bypass validation entirely. A malicious USB
device presenting a truncated UAC3 header could exploit this to cause
out-of-bounds reads when the driver later accesses unvalidated
descriptor fields.
The bug was introduced in the same commit as the recently fixed UAC3
feature unit sub-type typo, and appears to be from the same copy-paste
error when the UAC3 section was created from the UAC2 section. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kaweth: validate USB endpoints
The kaweth driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf/bonding: reject vlan+srcmac xmit_hash_policy change when XDP is loaded
bond_option_mode_set() already rejects mode changes that would make a
loaded XDP program incompatible via bond_xdp_check(). However,
bond_option_xmit_hash_policy_set() has no such guard.
For 802.3ad and balance-xor modes, bond_xdp_check() returns false when
xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually
absent due to hardware offload. This means a user can:
1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode
with a compatible xmit_hash_policy (e.g. layer2+3).
2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded.
This leaves bond->xdp_prog set but bond_xdp_check() now returning false
for the same device. When the bond is later destroyed, dev_xdp_uninstall()
calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits
the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering:
WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL))
Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an
XDP program is loaded on a bond in 802.3ad or balance-xor mode.
commit 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP")
introduced bond_xdp_check() which returns false for 802.3ad/balance-xor
modes when xmit_hash_policy is vlan+srcmac. The check was wired into
bond_xdp_set() to reject XDP attachment with an incompatible policy, but
the symmetric path -- preventing xmit_hash_policy from being changed to an
incompatible value after XDP is already loaded -- was left unguarded in
bond_option_xmit_hash_policy_set().
Note:
commit 094ee6017ea0 ("bonding: check xdp prog when set bond mode")
later added a similar guard to bond_option_mode_set(), but
bond_option_xmit_hash_policy_set() remained unprotected. |
| When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control codes that when later are sent back to a HTTPserver might make the server return 400 responses. Effectively allowing a"sister site" to deny service to all siblings. |
| Improper validation of syntactic correctness of input in Windows Hyper-V allows an authorized attacker to perform spoofing locally. |
| Out-of-bounds Write (CWE-787) in the PEA archive extraction routine (pea.pas, unpea_procedure) of the first-party pea component in PeaZip 11.2.0 and earlier allows an attacker who convinces a victim to open or extract a crafted .pea archive to execute arbitrary code as the user running PeaZip. While decompressing a PCOMPRESS1 stream, the 32-bit compressed-block-size field of the first block (compsize) is read directly from the archive and used without validation as the length of a blockread into the fixed-size global buffers wbuf1/wbuf2 (1,114,112 bytes) and as the bound of the subsequent copy loop. The existing check "compsize > WBUFSIZE" is applied only to the size of each following block, so the first block escapes it; the same unvalidated value is also used to index wbuf1[compsize], an out-of-bounds read at an attacker-chosen offset. The copy loop additionally copies the requested length instead of the number of bytes actually read, and terminates on equality rather than on an upper bound. Because the project is built without range checking and no archive password, integrity tag or non-default configuration is required, the overflow overwrites adjacent global data; code execution was demonstrated by two independent researchers against the official Linux x86-64 and Windows x64 builds, and the denial-of-service and memory-corruption primitive is cross-platform (Windows, macOS, Linux, BSD). |
| MariaDB server is a community developed fork of MySQL server. From 10.6.1 until 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2, MariaDB insufficiently validated counts, offsets, lengths, and field boundaries in FRM metadata while opening binary FRM files. An attacker able to place a crafted FRM file in the data directory could trigger out-of-bounds reads or writes, crash the server, or potentially execute code. This issue is fixed in versions 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2. |
| A flaw was found in curl. A remote malicious server can trigger a denial of service (DoS) in cookie handling by providing an overly long cookie name and value that exceeds curl's line-length limit when saved to a cookie file. Subsequent curl operations reading from this cookie file silently abort parsing upon encountering the oversized entry, causing all remaining valid cookies in the file to be ignored. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Improper Validation of Specified Type of Input vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Information exposure and Information tampering. |
| fast-jwt provides fast JSON Web Token (JWT) implementation. Prior to 6.3.0, fast-jwt createVerifier accepts a validly signed JWT whose payload is a JSON array because src/decoder.js checks that the payload is an object but does not reject arrays. The claim validator loop then finds no named exp, nbf, iss, aud, sub, jti, or nonce properties and silently skips those configured checks, returning the array as a successfully verified payload. An attacker who can produce or influence a validly signed token may bypass expiry, issuer, audience, subject, revocation, and replay protections. The opt-in requiredClaims option can block missing claims, and signature verification itself is not bypassed. This issue is fixed in version 6.3.0. |
| Gitoxide gix-pack before 0.75.0 contains a denial of service vulnerability that allows malicious remotes to crash fetch operations by sending crafted thin-pack OFS_DELTA entries. Attackers can serve a thin pack with a REF_DELTA referencing an existing object followed by an OFS_DELTA whose base_distance exceeds pack_offset, triggering a panic in LookupRefDeltaObjectsIter that aborts the fetch process. |
| Tink-go (tink-crypto/tink-go) through 2.8.0 contains an input-validation vulnerability where keyset.NewHandleWithNoSecrets() and ReadWithNoSecrets() skip the structural Validate() step before constructing a keyset.Handle, allowing malformed public or no-secret keysets that violate Tink's keyset invariants to be accepted. Attackers can supply a malformed keyset, such as one with an enabled public key lacking a valid primary key or a DESTROYED key with no KeyData, causing inconsistent downstream validation where functions like jwt.JWKSetFromPublicKeysetHandle() process the invalid handle and produce a JWK set, potentially misleading applications that rely on successful handle construction as proof of keyset integrity. |
