Export limit exceeded: 409964 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409964 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98721 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: cadence: Initialize IRQ state before requesting IRQ The Cadence NAND interrupt handler uses both the IRQ lock and completion object. Registering the IRQ before initializing them leaves a window in which a pending interrupt can access uninitialized synchronization state. Initialize them before registering the handler. | ||||
| CVE-2026-98724 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: pci-epf: reject too-short SGL segments The host controls an SGL segment's length. A nonzero length smaller than one SGL descriptor makes nr_descs zero, so nvmet_pci_epf_get_sgl_segment() reads the type byte of sgls[-1] outside the allocated buffer. If that byte contains a segment descriptor type, the function also copies the preceding 16 bytes and returns a negative descriptor count. The read was reproduced in 3/3 KASAN boots with only the host transfer mocked by a KUnit test: BUG: KASAN: slab-out-of-bounds in nvmet_pci_epf_get_sgl_segment Read of size 1 by task kunit_try_catch Call Trace: nvmet_pci_epf_get_sgl_segment nvmet_pci_epf_short_sgl_test Kernel panic - not syncing: KASAN: panic_on_warn set ... Reject segments that cannot hold one descriptor before allocating or transferring their contents. | ||||
| CVE-2026-98725 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: fix out-of-bounds write in nvmet_auth_challenge() nvmet_auth_challenge() receives its output buffer as a void pointer. sizeof(*d) therefore evaluates to one with GCC and undercounts the fixed challenge header by 15 bytes. A short AUTH_RECEIVE buffer can pass the check before the challenge is copied past the end of its allocation. Use the typed challenge pointer when calculating the response size. BUG: KASAN: slab-out-of-bounds in nvmet_execute_auth_receive (drivers/nvme/target/fabrics-cmd-auth.c:442 drivers/nvme/target/fabrics-cmd-auth.c:569) Write of size 32 by task kworker/1:1H/64 Workqueue: nvmet_tcp_wq nvmet_tcp_io_work Call Trace: nvmet_execute_auth_receive (drivers/nvme/target/fabrics-cmd-auth.c:442 drivers/nvme/target/fabrics-cmd-auth.c:569) nvmet_tcp_try_recv_pdu (drivers/nvme/target/tcp.c:1119 drivers/nvme/target/tcp.c:1243) nvmet_tcp_io_work (drivers/nvme/target/tcp.c:1350 drivers/nvme/target/tcp.c:1382 drivers/nvme/target/tcp.c:1445) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3405 kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) The buggy address is located 16 bytes inside of allocated 33-byte region [ffff888000554e80, ffff888000554ea1) Kernel panic - not syncing: KASAN: panic_on_warn set ... | ||||
| CVE-2026-97820 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-18 | 6.5 Medium |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. | ||||
| CVE-2026-97825 | 1 Microsoft | 23 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 20 more | 2026-10-18 | 6.5 Medium |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. | ||||
| CVE-2026-98641 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: set up the frame pointer for the exception callback A program acting as exception boundary saves all callee-saved registers, so build_prologue() takes the exception_cb path and never calls push_callee_regs(). That is the only place find_used_callee_regs() runs, and with it the only place ctx->fp_used is set, so the callback prologue does not emit the mov x25, sp that points BPF_REG_FP at the frame the callback runs on. x25 keeps whatever it held when bpf_throw() was called. If the throw came from a subprogram that uses its own BPF stack, that is the subprogram's frame pointer, and since the subprogram never returns it never restores x25 either. Stack accesses through BPF_REG_FP are rewritten to be stack pointer relative, so those still land in the callback's own frame. Materializing the register does not: a callback that passes the address of a local variable to a helper hands over an address in the dead subprogram's frame. That address is below the callback's stack pointer by then, and the helper's own call chain covers it, so the helper can write over its own return address. 0x1234 below is the value the helper was asked to store: pc : 0x1234 lr : 0x1234 Call trace: 0x1234 (P) bpf_test_run+0x188/0x3e0 bpf_prog_test_run_skb+0x47c/0x998 __sys_bpf+0xbdc/0xdd8 Kernel panic - not syncing: Oops: Fatal exception in interrupt Set ctx->fp_used on the exception callback path so that the existing code further down sets x25 from the stack pointer. The epilogue restores it from the main program's save area along with the other callee-saved registers, as it already does. x86 sets the frame pointer for the callback from the argument it is passed, and powerpc computes it from the stack pointer. | ||||
| CVE-2026-98642 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF due to concurrent consumption of ttrace lists in alloc_bulk Syzkaller repeatedly triggered UAF splats related to nodes in waiting_for_gp_ttrace within the bpf memalloc: BUG: KASAN: slab-use-after-free in llist_del_first+0x85/0x110 lib/llist.c:61 Read of size 8 at addr ffff8881572cd080 by task syz.4.470/5112 ... llist_del_first+0x85/0x110 lib/llist.c:61 alloc_bulk+0x193/0x460 kernel/bpf/memalloc.c:229 bpf_mem_refill+0x386/0x560 kernel/bpf/memalloc.c:436 Freed by task 14: ... __free_rcu kernel/bpf/memalloc.c:281 [inline] __free_rcu_tasks_trace+0x48/0xd0 kernel/bpf/memalloc.c:291 rcu_tasks_invoke_cbs+0x1ec/0x3e0 kernel/rcu/tasks.h:571 rcu_tasks_one_gp+0x13d/0x220 kernel/rcu/tasks.h:621 rcu_tasks_kthread+0xf3/0x120 kernel/rcu/tasks.h:651 The reason is that the UAF occurs after the RCU Tasks Trace GP expires: when the __free_rcu() callback runs, there is no synchronization protecting llist_del_all() against concurrent alloc_bulk() operating on waiting_for_gp_ttrace, leading to the race condition below: CPU0 CPU1 __free_rcu (RCU Tasks Trace callback) alloc_bulk llist_del_first(&c->waiting_for_gp_ttrace) entry = smp_load_acquire(&head->first); do { if (entry == NULL) return NULL; free_all(llist_del_all(&c->waiting_for_gp_ttrace)) llist_for_each_safe(pos, t, llnode) free_one(pos); next = READ_ONCE(entry->next); <-- trigger UAF } while (!try_cmpxchg(&head->first, &entry, next)); In addition, there is also a theoretical race condition on the free_by_rcu_ttrace list. This race requires two preconditions: an in-flight Tasks Trace GP keeping c->call_rcu_ttrace_in_progress == 1, and concurrent cross-CPU frees repopulating c->free_by_rcu_ttrace with new nodes. Under these conditions, the following scenario triggers UAF: // CPU0 // irq work is still busy (on PREEMPT_RT) alloc_bulk() llist_del_first(&c->free_by_rcu_ttrace) entry = smp_load_acquire(&head->first); do { if (entry == NULL) return NULL; // CPU1 bpf_mem_alloc_destroy() WRITE_ONCE(c->draining, true) // wait for CPU0 irq_work_sync() // CPU2 do_call_rcu_ttrace(tgt(CPU0)) if (c->draining) { llist_del_all(&c->free_by_rcu_ttrace) free_all() } // CPU0 continue next = READ_ONCE(entry->next); <-- trigger UAF while (!try_cmpxchg(&head->first, &entry, next)); Fix this by introducing a raw spinlock to synchronize the concurrent consumption on waiting_for_gp_ttrace and free_by_rcu_ttrace. | ||||
| CVE-2026-98643 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix out-of-bounds read of rtt_min in sock_ops A sockops prog reading skops->rtt_min never checks the sk type: on the tcp_conn_request() path sock_ops->sk is a request_sock (non-full), and the ctx rewrite casts it to a tcp_sock (full) and reads rtt_min past the end of the request_sock, returning dirty adjacent memory. SEC("sockops") int prog(struct bpf_sock_ops *skops) { switch (skops->op) { case BPF_SOCK_OPS_RWND_INIT: leak = skops->rtt_min; /* reads the request_sock OOB */ ... } } For instance one such read returned rtt_min=0xffff8881, the high half of a leaked kernel pointer. Guarding that cast is exactly what SOCK_OPS_GET_FIELD() does -- it checks is_locked_tcp_sock and returns 0 when sock_ops->sk is not a locked full socket. Every other tcp_sock field in sock_ops goes through it; rtt_min is the only one open-coded, so it skips the check. Read rtt_min through SOCK_OPS_GET_FIELD() too. rtt_min is a bit special: it is a struct minmax and we only want the current min, so pass rtt_min.s[0].v. That is equivalent to the old hand-computed offset offsetof(struct tcp_sock, rtt_min) + sizeof_field(struct minmax_sample, t) (s[0] sits at rtt_min + 0 and .v at + sizeof(.t), i.e. what minmax_get() returns), so the loaded field is unchanged and only the full-sock guard is added. The two BUILD_BUG_ON()s that protected the hand-computed offset are no longer needed. Before patch: 0: r1 = *(u64 *)(r1 +0) ; r1 = skops->sk 1: r1 = *(u32 *)(r1 +2324) ; ((tcp_sock *)sk)->rtt_min.s[0].v After patch: 0: *(u64 *)(r1 +56) = r9 1: r9 = *(u8 *)(r1 +50) ; is_locked_tcp_sock 2: if r9 == 0 goto pc+4 ; not a locked full sock -> 0 3: r9 = *(u64 *)(r1 +56) 4: r1 = *(u64 *)(r1 +0) ; r1 = skops->sk 5: r1 = *(u32 *)(r1 +2324) ; rtt_min.s[0].v 6: goto pc+2 7: r9 = *(u64 *)(r1 +56) 8: r1 = 0 | ||||
| CVE-2026-98644 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Avoid soft lockup in __htab_map_lookup_and_delete_batch() __htab_map_lookup_and_delete_batch() has no rescheduling point. The batch count bounds how many entries are copied out, not how many buckets are visited, so one BPF_MAP_LOOKUP_BATCH call can walk the map end to end. The empty-bucket fast path is worse: it stays inside a single rcu_read_lock() / bpf_disable_instrumentation() section for any run of consecutive empty buckets. That holds up on small maps, but it falls apart at scale. On a 144-CPU arm64 host running a CONFIG_PREEMPT_NONE kernel, periodic BPF_MAP_LOOKUP_BATCH calls against an LRU hash map with 16,777,216 buckets held a CPU inside the batch op for 77+ seconds and triggered the soft lockup watchdog. Commit 75134f16e7dd ("bpf: Add schedule points in batch ops") fixed this same problem in the generic batch ops, but not in this htab-native path, which every htab-based hash map variant uses for its lookup[_and_delete] batch ops. Complete that fix here. Leave the critical section after 64 consecutive empty buckets, call cond_resched_tasks_rcu_qs(), and resume at the saved bucket cursor. No locks are held at that point, and resuming from the cursor is already the function's behavior for non-empty buckets. Add the same call to the per-bucket loop after copy_to_user(), where every lock has been dropped. cond_resched_rcu() is not enough here: sleeping with bpf_prog_active elevated makes tracing programs on that CPU silently skip their invocations. Plain cond_resched() is not enough either. It is a no-op under PREEMPT and PREEMPT_LAZY, the only models arm64 and x86 have offered since commit 7dadeaa6e851 ("sched: Further restrict the preemption modes"). It is also never a Tasks RCU quiescent state, in any model: the reschedule counts as a preemption. The walking task stays a holdout and stalls every synchronize_rcu_tasks() caller, ftrace and BPF trampoline teardown included, until the syscall returns [1]. cond_resched_tasks_rcu_qs() is the usual tool for that [2]. It reports the quiescent state at each yield and still reschedules as cond_resched() does on PREEMPT_NONE and PREEMPT_VOLUNTARY kernels. | ||||
| CVE-2026-98645 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: winwing: fix use-after-free in force feedback teardown winwing_init_ff() passes the driver's private data, allocated with devm_kzalloc() in winwing_probe(), as the effect context to input_ff_create_memless(). The memoryless force-feedback core takes ownership of that pointer and frees it with kfree() from input_ff_destroy() (ml_ff_destroy()) when the input device is destroyed. Freeing a devm-managed allocation with kfree() is an invalid free, and the same object is then released again by devres when the HID device is torn down, a double free. As the allocation also embeds the LED class devices, their timers and work item live on freed memory and the slab gets corrupted. This triggers on unbind, rmmod, hot-unplug and on system suspend, where the firmware cache walks the now-corrupt devres list. KASAN reports: BUG: KASAN: invalid-free in input_ff_destroy Allocated by task N: winwing_probe Pass NULL as the memless context instead and fetch the driver data from the input device in winwing_play_effect(): the HID core already stores the hid_device as the input device's drvdata. The force-feedback core then owns nothing that it must not free. | ||||
| CVE-2026-98646 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Skip cond_resched() in inet_csk_listen_stop() under BPF context bpf_sock_destroy() runs from the tcp iterator, under rcu_read_lock(). If the sock is a listener that still has children in its accept queue, tcp_abort() ends up in inet_csk_listen_stop() and the cond_resched() there trips the debug check: BUG: sleeping function called from invalid context at net/ipv4/inet_connection_sock.c:1523 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 628, name: test_progs preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 locks held by test_progs/628: 3, last CPU#3: #0: ffff8881158cee18 (&p->lock){+.+.}-{4:4}, at: bpf_seq_read+0x56/0x1210 #1: ffff8881106bb858 (sk_lock-AF_INET6){+.+.}-{0:0}, at: bpf_iter_tcp_seq_show+0x32b/0x4b0 #2: ffffffffb435af20 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x46b/0xde0 CPU: 3 UID: 0 PID: 628 Comm: test_progs Tainted: G W 7.2.0+ #65 PREEMPT Tainted: [W]=WARN Call Trace: <TASK> dump_stack_lvl+0xc1/0xf0 dump_stack+0x10/0x20 __might_resched+0x3d2/0x610 inet_csk_listen_stop+0x7b/0xbf0 tcp_abort+0x23b/0x3b0 bpf_sock_destroy+0xfc/0x140 bpf_prog_448133d24601754f_iter_tcp6_server+0x81/0x8a bpf_iter_run_prog+0x538/0xde0 bpf_iter_tcp_seq_show+0x26b/0x4b0 bpf_seq_read+0x424/0x1210 vfs_read+0x197/0xe40 ksys_read+0x119/0x240 __x64_sys_read+0x72/0xc0 x64_sys_call+0x647/0x27e0 do_syscall_64+0xe5/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fad39b28aca RSP: 002b:00007ffc381c61c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 00007ffc381c6a88 RCX: 00007fad39b28aca RDX: 0000000000000032 RSI: 00007ffc381c6250 RDI: 0000000000000014 RBP: 00007ffc381c61e0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 R13: 0000000000000000 R14: 000055f077c1bbb0 R15: 00007fad3a0f3000 </TASK> The commit that added the kfunc already guards lock_sock() in tcp_abort() and udp_abort() with has_current_bpf_ctx(), but missed the listener path. Do the same for the cond_resched(). The loop runs inside the iterator's rcu_read_lock(), it must not reschedule or report a quiescent state there. | ||||
| CVE-2026-98647 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix divide-by-zero in btf_struct_walk() When an access goes past the struct and the last member is a flexible array, btf_struct_walk() folds the offset back into a single element with (off - moff) % t->size, but never checks that the element type has a size. BTF takes an empty struct, so this in program BTF /* event could be empty */ struct event { #ifdef HAVE_TIMESTAMP __u64 ts; #endif }; struct batch { int nr; struct event events[]; }; divides by zero at prog load time. Getting there needs a PTR_TO_BTF_ID that is not MEM_ALLOC, e.g. a plain read of a local kptr stashed in a map from a sleepable program. Oops: divide error: 0000 [#1] SMP KASAN PTI RIP: 0010:btf_struct_walk+0x53f/0x1570 Call Trace: <TASK> btf_struct_access+0x42a/0xcd0 check_ptr_to_btf_access+0x4dc/0x1160 check_mem_access+0x3a45/0x8740 check_load_mem+0x36a/0xd10 do_check_common+0x3ef0/0xb210 bpf_check+0x6d3b/0x8580 bpf_prog_load+0xf7c/0x2720 __sys_bpf+0xa83/0x3690 __x64_sys_bpf+0xc7/0x150 x64_sys_call+0x1f3f/0x27e0 do_syscall_64+0xe5/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Reject a zero-sized element type. The fixed array path in the same function already bails out on the same thing: btf_struct_walk() ... /* skip empty array */ if (moff == mtrue_end) continue; msize /= total_nelems; | ||||
| CVE-2026-98648 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/uv: Prevent potential out-of-bounds read When the system has more than 85 secrets, the uv_secret_list struct array only holds up to 85 items per page, resulting in an out of bounds read in find_secret_in_page if the targeted secret is in the next page or not stored at all. Fix this by looping over the number of stored secrets which is the per sub-list count of stored secrets and not the overall count. | ||||
| CVE-2026-98649 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix race in _destroy_pages_crste() Use READ_ONCE() in _destroy_pages_crste() to read the crste, avoid dereferencing the pointer multiple times. | ||||
| CVE-2026-98651 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Properly handle NULL pointer in dat_cond_set_storage_key() Some callers pass NULL as oldkey. Calling page_cond_set_storage_key() will cause that NULL pointer to get dereferenced. Fix by checking for NULL and assigning the pointer to a dummy local variable to avoid crashes. | ||||
| CVE-2026-98652 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Add missing srcu in kvm_s390_set_irq_state() Like kvm_s390_inject_vcpu(), kvm_s390_set_irq_state() also needs the kvm->srcu or the slots lock when performing the Store status operation. Fix by taking kvm->srcu in kvm_s390_set_irq_state(). | ||||
| CVE-2026-98654 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Atomize IRQ register read/modify/write ops [Why] The OTG_GLOBAL_SYNC_STATUS register controls various HW IRQ sources for the output timing generator (OTG). VUPDATE_NO_LOCK is one of them. To enable the IRQ, driver sets the VUPDATE_NO_LOCK_EN bit in the GLOBAL_SYNC_STATUS register. To ack the IRQ after it fires, the driver sets the VUPDATE_NO_LOCK_CLEAR bit in the same GLOBAL_SYNC_STATUS register. The bit sets are done through read/modify/write operations, which are not atomic. Thus, the following race is possible: Thread A: IRQ handler: *HW IRQ fires* # IRQ disable val = read(GLOBAL_SYNC_STATUS) unset(val, VUPDATE_NO_LOCK_EN) write(val, GLOBAL_SYNC_STATUS) # ACK reads VUPDATE_NO_LOCK_EN unset val1 = read(GLOBAL_SYNC_STATUS) set(val1, VUPDATE_NO_LOCK_CLEAR) # IRQ enable val = read(GLOBAL_SYNC_STATUS) set(val, VUPDATE_NO_LOCK_EN) write(val, GLOBAL_SYNC_STATUS) # BAD! clears VUPDATE_NO_LOCK_EN write(val1, GLOBAL_SYNC_STATUS) Regarding the tagged Fixes: change, it appears the change made this race more likely to occur. Since VUPDATE_NO_LOCK is now the sole IRQ source for vblank handling, a single race on high refresh panels can lead to a time out. [How] The GLOBAL_SYNC_STATUS register is only one example, other IRQ control registers also share the same scheme. On top of GLOBAL_SYNC_STATUS, let's clean up those as well. To keep things simple, Let's atomize the IRQ rmw ops via a single driver-wide spinlock. Due to the small scope of this lock, it is unlikely to cause noticeable overhead on top of all the existing locking within the IRQ set/handle paths. Since DM is responsible for locking, wrap dc_interrupt_set/ack with the spinlock in the new amdgpu_dm_irq_set/ack functions. Migrate/drop all references in DM to dc_interrupt_set/ack to use amdgpu_dm_irq_set/ack instead. (cherry picked from commit 70de0a0216583a53c946155f8c8adedfdca6b4e7) | ||||
| CVE-2026-98656 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: trigger: cancel reenable_work before freeing trigger iio_trigger_notify_done_atomic() defers ->reenable() into trig->reenable_work on the system workqueue, and the worker dereferences the owning trigger through container_of(). Nothing cancels this work before iio_trig_release() frees the trigger, so a worker armed by the last in-flight IRQ can outlive the free and touch freed memory. Cancel it at the top of iio_trig_release(), which every free path reaches through the device core's final put_device(). Found by an in-house static analysis tool. | ||||
| CVE-2026-98729 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm: Don't apply va_align to hugetlb mappings on AMD F15h get_align_mask() returns huge_page_mask_align() for hugetlbfs, but get_align_bits() adds va_align.bits regardless, so vm_unmapped_area() returns an address off the huge page boundary and __unmap_hugepage_range() hits BUG_ON(start & ~huge_page_mask(h)) at teardown. This can be triggered on Carrizo and FX-8370E, both hstates. Pass the file to get_align_bits() and skip the randomisation for hugetlbfs. [ bp: Massage commit message. ] | ||||
| CVE-2026-98730 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: reject oversized TX packets in send_frame() btintel_pcie_send_frame() eventually copies skb->data into a fixed BTINTEL_PCIE_BUFFER_SIZE (4096) DMA buffer via memcpy() in btintel_pcie_prepare_tx(), with a 4-byte PCIe type header prepended. A user-space process with HCI_CHANNEL_USER access can inject an oversized packet and overflow the buffer. Reject packets larger than BTINTEL_PCIE_BUFFER_SIZE - BTINTEL_PCIE_HCI_TYPE_LEN on entry. | ||||