Export limit exceeded: 393736 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 393736 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (393736 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89960 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: fix stale pqap_hook pointer on error in vfio_ap_mdev_set_kvm() In vfio_ap_mdev_set_kvm(), kvm->arch.crypto.pqap_hook is set to &matrix_mdev->pqap_hook before the update locks are acquired and the mdev list is checked for a conflicting assignment. If another mdev is already attached to the same KVM instance, the function returns -EPERM without restoring the hook pointer, leaving kvm->arch.crypto.pqap_hook pointing at the failing matrix_mdev instead of the mdev that legitimately owns the KVM. Since matrix_mdev->kvm is never set on this error path, vfio_ap_mdev_unset_kvm() will not clean up the hook when matrix_mdev is later closed. If matrix_mdev is subsequently freed, any PQAP instruction executed by the guest will dereference the stale pointer through pqap_hook_rwsem, resulting in a use-after-free. Since kvm->arch.crypto.pqap_hook is only set in the vfio_ap_mdev_set_kvm() function and is cleared in the vfio_ap_mdev_unset_kvm() function, a check for 'kvm->arch.crypto.pqap_hook != NULL' is all that is needed to determine whether it belongs to another mdev. This will alleviate the need to iterate the matrix_dev->mdev_list list to see if the kvm object is assigned to another mdev.This was introduced in v3 to alleviate the need to take the mdevs_lock while iterating the list; however, this did not prevent a potential race condition. The pqap_hook_rwsem(write) is now performed inside get_update_locks_for_kvm(), which is updated to acquire pqap_hook_rwsem(write) between kvm->lock and mdevs_lock. This ordering is consistent with the PQAP intercept path, which acquires pqap_hook_rwsem in read mode while srcu is held under vcpu->mutex, establishing the dependency: kvm->lock -> vcpu->mutex -> srcu -> pqap_hook_rwsem(read). The pqap_hook_rwsem is now released inside the release_update_locks_for_kvm(), which is updated to release pqap_hook_rwsem(write) between mdevs_lock and kvm->lock. Additionally, kvm_put_kvm() in vfio_ap_mdev_unset_kvm() is moved after release_update_locks_for_kvm(). Previously it was called while kvm->lock was held; if it were ever the last reference, kvm_destroy_vm() would run under kvm->lock, which would deadlock. | ||||
| CVE-2026-89959 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix control domain removal in vfio_ap_mdev_cfg_remove The vfio_ap_config_remove function uses the bitmap_andnot function to clear bits from the matrix_mdev->matrix.adm bitmap (specifies the control domains assigned to the mdev). This prevents the explicitly unplugged control domains from being removed the KVM guest. The bitmap_and function is used instead. | ||||
| CVE-2026-89957 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix hot-unplug skipped when last AP adapter or domain removed The vfio_ap_mdev_hot_unplug_cfg() function uses the return value of bitmap_andnot() to determine whether the guest APCB needs to be updated. However, bitmap_andnot() returns false when the resulting destination bitmap is empty. This means that if the only adapter, domain or control domain assigned to an mdev is removed from the host's AP configuration, the bit is correctly cleared from the shadow APCB, but bitmap_andnot() returns false because the result is an empty bitmap. Consequently, do_hotplug remains 0 and vfio_ap_mdev_update_guest_apcb() is never called, leaving the KVM guest with stale hardware access to the unplugged AP devices. Fix this by replacing the bitmap_andnot() return value check with bitmap_intersects() to determine whether the shadow APCB actually overlaps with the removal mask. If there is an intersection, call bitmap_andnot() solely for its side effect of clearing the bits, then unconditionally set do_hotplug to trigger the guest APCB update. | ||||
| CVE-2026-89954 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: mtd: afs: validate v2 image info bounds The AFS v2 parser uses footer[8] to locate the image information block inside the current erase block, then uses the image information region_count to walk entries from a fixed local array. The footer offset and region count come from flash contents and are not checked against the erase block or the local image-info array before use. Reject v2 entries whose image information offset would underflow the erase block calculation, and reject region counts that cannot fit in the local image-info array before walking region entries. | ||||
| CVE-2026-89951 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: fix stale receive device on merged fragments Fragment reassembly reuses the skb from the highest-numbered buffered fragment as the merged packet. When that fragment was received on a hard interface which is deleted before the chain completes, the merged skb can re-enter the receive path with a stale skb->dev and skb_iif. batadv_batman_skb_recv() passes such merged packets through the normal receive handlers again. DAT and bridge loop avoidance both derive the ARP header length from skb->dev, so they can dereference the freed net_device before the packet reaches the local mesh interface. Refresh the receive device metadata from the current receive device before running the packet handlers. This keeps internally reinjected merged fragments consistent with the normal receive path after hard interface teardown. | ||||
| CVE-2026-89947 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: clk: meson: align gxbb_32k_clk_sel number of parents with actual count The following out-of-bounds read has been observed by Christian on a GXBB WeTek Hub: ================================================================== BUG: KASAN: global-out-of-bounds in __clk_register+0x1b70/0x2418 Read of size 8 at addr ffffd66320cf88e0 by task swapper/0/1 CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 7.0.0-rc5 #1 PREEMPT Hardware name: WeTek Hub (DT) Call trace: show_stack+0x14/0x20 (C) dump_stack_lvl+0x74/0x94 print_report+0x164/0x4b0 kasan_report+0x98/0xd8 __asan_report_load8_noabort+0x1c/0x24 __clk_register+0x1b70/0x2418 devm_clk_hw_register+0x74/0x15c meson_clkc_init+0xd4/0x20c meson_clkc_syscon_probe+0x5c/0x94 platform_probe+0xbc/0x17c really_probe+0x184/0x844 __driver_probe_device+0x154/0x35c driver_probe_device+0x60/0x188 __driver_attach+0x168/0x4a0 bus_for_each_dev+0xec/0x180 driver_attach+0x38/0x58 bus_add_driver+0x238/0x4c0 driver_register+0x150/0x388 __platform_driver_register+0x54/0x7c gxbb_clkc_driver_init+0x18/0x20 do_one_initcall+0xb8/0x340 kernel_init_freeable+0x49c/0x52c kernel_init+0x24/0x148 ret_from_fork+0x10/0x20 The buggy address belongs to the variable: gxbb_32k_clk_parents+0x60/0x400 The buggy address belongs to a vmalloc virtual mapping The buggy address belongs to the physical page: Memory state around the buggy address: ffffd66320cf8780: 00 00 00 00 f9 f9 f9 f9 00 f9 f9 f9 f9 f9 f9 f9 ffffd66320cf8800: 00 04 f9 f9 f9 f9 f9 f9 00 04 f9 f9 f9 f9 f9 f9 >ffffd66320cf8880: 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 f9 f9 ^ ffffd66320cf8900: 00 01 f9 f9 f9 f9 f9 f9 00 06 f9 f9 f9 f9 f9 f9 ffffd66320cf8980: 00 00 02 f9 f9 f9 f9 f9 00 00 02 f9 f9 f9 f9 f9 ================================================================== Commit 7915d7d5407c ("clk: amlogic: gxbb: drop non existing 32k clock parent") dropped a non-existing clock parent from the gxbb_32k_clk_sel mux but didn't adjust the hard-coded num_parents field. Fix the actual number of parents of that mux by using ARRAY_SIZE instead (avoiding similar problems in future). | ||||
| CVE-2026-89943 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: loongson: Fix error handling in ACPI property parsing In loongson_card_parse_acpi(), the return value of device_property_read_string() for the `codec-dai-name` property was ignored. If the property is missing or invalid, an uninitialized pointer would be used later, potentially leading to undefined behavior. Fix this by checking the return value and propagating the error appropriately. | ||||
| CVE-2026-89942 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Fix potential use-after-free in anonymous buffer release An anonymous buffer handle holds a reference to the underlying IIO device. The reference is dropped in the buffer handle's release function. If the device has been removed, either through unbind or hot-unplug, the buffer handle might hold the last reference. The release function takes the mutex for the buffer using a guard, which means the unlock happens after all the code in the function, including `iio_device_put()`. If the anonymous buffer holds the last reference this might free both the IIO device and the buffer, which contains the mutex, leading to use-after-free when the mutex is unlocked. Fix this by using a scoped guard just around the buffer dmabuf list access, making sure the mutex is unlocked before releasing the IIO device. Version 10 of the patch that introduced this issue used this exact scheme of first unlocking and then dropping the reference [1]. During review it was suggested to use a guard instead, and version 11 made that change [2]. | ||||
| CVE-2026-89941 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Make IIO DMA fence release RCU-safe The `dma_fence` documentation states that if a custom release implementation is provided, the `dma_fence` object must be freed in an RCU-safe way. The current `iio_dma_fence` implementation uses `kfree()`, which might result in a use-after-free. Remove the custom `release` implementation. This makes the DMA fence core fall back to `dma_fence_free()`, which calls `kfree_rcu()` on the fence. This requires that the fence be the first member of `struct iio_dma_fence`. Using the default release method for extended DMA fence structures is a common pattern. | ||||
| CVE-2026-89940 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Tie IIO dma fence lock lifetime to the fence The `iio_dma_fence` implementation currently uses a lock embedded in the `iio_dmabuf_priv`. But the `iio_dma_fence` can outlive the `iio_dmabuf_priv`, which can cause a use-after-free. Tie the lifetime of the lock to the lifetime of the fence by embedding them in the same struct. We can't just hold a reference to the `iio_dmabuf_priv` from the `iio_dma_fence` since `iio_buffer_dmabuf_release()` might sleep and the fence release callback is not allowed to sleep. Note that the `dma_fence` framework now has an internal lock that gets used when the passing `NULL` for `lock` in `dma_fence_init()`, but in order to allow this patch to be backportable use an external lock. | ||||
| CVE-2026-89938 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF The atlas driver requests its hardware data-ready IRQ with devm_request_threaded_irq(); its threaded handler queues an irq_work, atlas_work_handler(), that calls iio_trigger_poll(data->trig). The IRQ is devm-managed, so free_irq() runs from the devres unwind after atlas_remove() returns without flushing that irq_work. Once a buffer is enabled, conversion-complete IRQs keep firing and queueing it; a pending irq_work can therefore run after the unwind has freed atlas_data/indio_dev and the trigger, when atlas_work_handler() derives the atlas_data pointer via container_of() and dereferences data->trig, a use-after-free. Call iio_trigger_poll_nested() directly from the threaded handler instead of bouncing through irq_work. free_irq() then drains the threaded handler, closing the window; other iio drivers with a threaded data-ready IRQ do the same (e.g. bmi270). This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-89932 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Always flush vpid02 on first use Make sure vpid02 is always flushed on first use by setting last_vpid=0 when allocating vpid02. nested_vmx_transition_tlb_flush() will always detect a VPID change on first VM-Enter after VMXON, because VPID=0 in vmcs12 is not allowed if L1 enables VPID. This avoids using stale TLB entries from a previous lifetime of the VPID, that might have been associated with a different vCPU (or a completely different VM). Note that last_vpid is already being initialized as 0 when the vCPU is created, but it is not reset when vpid02 is freed on VMXOFF. Hence, the problem can only occur if L1 does VMXOFF -> VMXON, runs an L2, and KVM happens to reuse a VPID that has TLB entries on the physical CPU. | ||||
| CVE-2026-89930 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Service local TLB flushes on failed nested VM-Enter KVM services local TLB flushes on "full" nested VM-Exits (through __nested_vmx_vmexit()), but not if a nested VM-Enter fails (e.g. due to failed VMCS checks in nested_vmx_enter_non_root_mode()). However, it is possible that KVM had queued TLB flushes that need to be performed, even if the nested VM-Enter was not successful. For example, if VPID is disabled for L2 (via nested_vmx_transition_tlb_flush(), or if via the MSR load lists, as the SDM says: If any MSR is being loaded in such a way that would architecturally require a TLB flush, the TLBs are updated so that, after VM entry, the logical processor will not use any translations that were cached before the transition. The SDM is unclear about when the TLB flush should occur, and whether or not a failed VM entry would flush the TLB, so it is safer to always do the TLB flush in this case. More concretely, KVM also updates the last VPID L1 used for L2 in nested_vmx_transition_tlb_flush() (i.e. last_vpid), even if the VM entry ultimately fails. With the current code, KVM could miss a TLB flush if L1 changes L2's VPID, then does a failed VM entry followed by a successful one, as the failed VM entry would update last_vpid but not actually flush the TLB. Servicing local TLB flushes on failed VM entries makes sure that the TLB is always flushed when last_vpid is updated. | ||||
| CVE-2026-89929 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVM: Ensure INVVPID is emulated on the correct physical CPU When emulating INVVPID, KVM executes INVVPID on the physical CPU using vpid02 (instead of the L1 assigned VPID), after doing some validations on the operands. However, it is possible that the physical CPU KVM executes INVVPID on is different from the CPU L2 is running on. For example, in the following scenario: - L2 runs on CPU #1 and exits to L1 (vmx->nested.vmcs02.cpu=1) - L1 migrates to CPU #2 and executes INVVPID - KVM executes INVVPID on CPU #2 - L1 migrates back to CPU #1 and runs L2 (vmx->nested.vmcs02.cpu=1) The TLB entries on CPU #1 are never invalidated, because INVVPID was executed on CPU #2, and vmcs02 never ran on a different pCPU (i.e. vmx_vcpu_load_vmcs() will *not* request KVM_REQ_TLB_FLUSH). Ensure that INVVPID is being executed on the same pCPU that L2 last ran on, and if not, fallback to clearing last_vpid=0 to trigger a full VPID flush on the next nested VM-Enter (as KVM will detect L1 using a different VPID for L2). If L2 ends up running on a different pCPU, KVM will flush the TLB anyway through vmx_vcpu_load_vmcs(). | ||||
| CVE-2026-89928 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Consume the locked rmap value in the lockless rmap walk __kvm_rmap_lock() deliberately elides the rmap lock when it observes an empty rmap. In that case kvm_rmap_lock_readonly() also re-enables preemption and returns zero, so the caller holds neither the rmap lock nor a preemption reference. The elision documents the invariant it relies on: * Elide the lock if the rmap is empty, as lockless walkers (read-only * mode) don't need to (and can't) walk an empty rmap, nor can they add * entries to the rmap. I.e. the only paths that process empty rmaps * do so while holding mmu_lock for write, and are mutually exclusive. kvm_rmap_age_gfn_range() ignores the returned value and unconditionally enters for_each_rmap_spte_lockless(). The iterator started with rmap_get_first(), which re-reads rmap_head->val rather than using the value returned by the lock. If a writer populates the rmap between the lock's read and the iterator's re-read, the aging path walks the newly installed rmap without holding its lock. For a KVM_RMAP_MANY rmap this leaves the walker following a pte_list_desc chain that it never locked. A writer holding mmu_lock for write may free that chain (e.g. kvm_zap_all_rmap_sptes() on the recycle path, or any rmap zap) via kmem_cache_free() while the walk is in progress, giving a slab use-after-free. Nothing serialises the two: the aging path runs without mmu_lock when CONFIG_KVM_MMU_LOCKLESS_AGING=y, and the rmap lock that would otherwise exclude the writer was elided. Because the empty path re-enables preemption, the interval between the two reads can span an arbitrary scheduling delay. Fix the class of bug by having the lockless walk consume the value returned by the lock instead of re-reading the rmap. Split rmap_get_first() into __rmap_get_first(), which starts an iterator from an already-read rmap value, and make for_each_rmap_spte_lockless() take that value and call __rmap_get_first() directly. kvm_rmap_age_gfn_range() passes the value returned by kvm_rmap_lock_readonly(): when the lock was elided the value is zero, __rmap_get_first() returns NULL, and the walk is skipped. No lockless walker re-reads the rmap, so the lock-elision invariant cannot be violated, and no lock()-without-paired-unlock() path is added to the aging code. | ||||
| CVE-2026-89927 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: hyper-v: Clamp stimer deadline to avoid livelock Fix an issue where userspace or the guest can program an Hyper-V synthetic timer to have a deadline in the past via integer overflow, preventing the CPU from making progress and triggering an RCU stall. Hyper-V's SynIC exposes 4 per-vCPU synthetic timers to the guest, which are emulated by KVM. Each is programmed through the HV_X64_MSR_STIMERi_CONFIG and HV_X64_MSR_STIMERi_COUNT MSRs. Depending on CONFIG, COUNT represents either the absolute expiration time or the period of a periodic timer, both expressed in 100ns ticks. These timers may be set both by the guest (WRMSR) and the host (KVM_SET_MSRS). When the timer is enabled, stimer_start() translates COUNT to an absolute monotonic deadline and arms an hrtimer. If COUNT is set to a value close to U64_MAX, the deadline calculation can overflow. ktime_add_ns(ktime_now, 100 * (stimer->exp_time - time_now)) This can result in a CPU livelock. stimer_start() arms the timer via hrtimer_start() with a deadline in the past, which causes it to immediately fire. The stimer callback then raises KVM_RQ_HV_STIMER, with the intention of causing KVM to deliver a synthetic interrupt on the next vCPU guest enter. Then, once userspace issues KVM_RUN, vcpu_enter_guest() consumes the request, calling kvm_hv_process_stimers(). This would normally disable the timer via stimer_expiration() once the deadline is in the past. However, the deadline comparison is done between the KVM reference counter and stime->exp_time, which is a big value close to U64_MAX, so this never happens for a few thousand years. kvm_hv_process_timers() then re-arms the timer via stimer_start(), since it was not disabled, which again fires immediately. Before entering the guest, kvm_vcpu_exit_request() checks kvm_request_pending(), which returns true due to the newly raised KVM_REQ_HV_STIMER. Then vcpu_enter_guest() aborts the guest entry, returning early into vcpu_run(), which loops back again into vcpu_enter_guest(), restarting the cycle. Since there are no manual yields in this loop, a task with SCHED_FIFO may starve RCU grace-period kthreads, which exposes the stalls found by syzcaller: rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: (detected by 1, t=10502 jiffies, g=14269, q=1142 ncpus=2) rcu: All QSes seen, last rcu_preempt kthread activity 10500 (4294965239-4294954739), jiffies_till_next_fqs=1, root ->qsmask 0x0 rcu: rcu_preempt kthread starved for 10500 jiffies! g14269 f0x2 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. ( ... ) Call Trace: <IRQ> __run_hrtimer kernel/time/hrtimer.c:1773 [inline] __hrtimer_run_queues+0x408/0xc30 kernel/time/hrtimer.c:1841 hrtimer_interrupt+0x45b/0xaa0 kernel/time/hrtimer.c:1903 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1045 [inline] __sysvec_apic_timer_interrupt+0x102/0x3e0 arch/x86/kernel/apic/apic.c:1062 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1056 [inline] sysvec_apic_timer_interrupt+0xa1/0xc0 arch/x86/kernel/apic/apic.c:1056 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:697 RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:152 [inline] RIP: 0010:_raw_spin_unlock_irqrestore+0xa8/0x110 kernel/locking/spinlock.c:194 Code: 74 05 e8 0b f4 5f f6 48 c7 44 24 20 00 00 00 00 9c 8f 44 24 20 f6 44 24 21 02 75 4f f7 c3 00 02 00 00 74 01 fb bf 01 00 00 00 <e8> 23 6b 27 f6 65 8b 05 7c 60 5a 07 85 c0 74 40 48 c7 04 24 0e 36 RSP: 0018:ffffc900040a7320 EFLAGS: 00000206 RAX: 5de15cb931505900 RBX: 0000000000000a06 RCX: 5de15cb931505900 RDX: 0000000000000007 RSI: ffffffff8daa9dc3 RDI: 0000000000000001 RBP: ffffc900040a73b0 R08: ffffffff8fc3d0 ---truncated--- | ||||
| CVE-2026-89922 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Take srcu when importing watchpoint data __import_wp_info() backs up the original guest memory contents of a watchpoint with read_guest_abs(), which is kvm_read_guest() and therefore resolves the memslot via __kvm_memslots(). That requires kvm->srcu (or kvm->slots_lock) to be held, otherwise a concurrent memslot update can free the memslots array under us once its SRCU grace period has elapsed. As this is not fast path, following lock ordering (mutex first, then srcu) take the big hammer and hold the srcu for the full import. | ||||
| CVE-2026-89920 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix memory corruption by not reinjecting CK machine checks Channel-subsystem damage machine checks are for the host channel subsystem. The guest channel subsystem is emulated in the userspace VMM. There is no point in forwarding such machine checks into the guest. This also simplifies the machine check reinjection and avoids kfree of a stack variable as reported by sashiko. There might be still machine checks that have the ck bit set with another bit (like instruction damage), mask out the CK bit in s390_backup_mcck_info(), like the CP and ED bits already are. | ||||
| CVE-2026-89919 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: keyop: use mmu_lock to read gmap->asce Every other dat_* consumer in this file (kvm_s390_get_skeys, set_skeys, get_cmma_bits, set_cmma_bits, MEM_CLR_CMMA, kvm_s390_fixup_prefix, kvm_test_age_gfn, kvm_age_gfn) reads kvm->arch.gmap->asce *inside* the mmu_lock read-side. keyop is the only outlier. gmap->asce is mutated under write_lock(mmu_lock) by gmap_set_limit() and keyop might use a stale asce value for walking as KVM_S390_KEYOP and KVM_S390_VM_MEM_LIMIT_SIZE can run concurrently. This can result in memory corruption. | ||||
| CVE-2026-89918 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Correctly handle end of VA space TLBI invalidation Our TLB invalidation by VA code is based on comparing two ranges, one defined by the TLB, and one defined by the TLBI instruction. Each range is defined by a start and a size. However, the way the comparison is done doesn't account for address rollover, as it compares an address with (base + size). This works nicely until this expression represent the last page/block in the TTBR1 VA space, as the result is a big fat 0. And a failed TLB invalidation. Rewrite the comparison in a way that is immune to the address rollover (making the end address inclusive instead of exclusive), and move this into a common helper that is used by both VA and IPA invalidations, as suggested by Hyunwoo Kim (although the IPA version didn't suffer from this particular problem, obviously). | ||||