| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Validate logical CPU id and clos id
Validate max CLOS ID and logical CPU ID for core power feature.
Reject any clos level or logical CPU number greater than the
supported maximum. These are used to calculate MMIO offset. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: int1092: Fix potential memory leak in sar_probe()
The memory allocated for device_mode_info in parse_package() called by
sar_get_data() is not freed in some of the error paths in sar_probe().
Fix that by converting to use device managed allocations. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: panasonic-laptop: Fix sentinel write past pcc->sinf[]
acpi_pcc_retrieve_biosdata() rejects SINF packages only when
pcc->num_sifr is strictly less than hkey->package.count, then
unconditionally writes a trailing sentinel at
pcc->sinf[hkey->package.count]. But pcc->sinf[] is allocated with
exactly pcc->num_sifr elements (valid indices 0..num_sifr-1), so that
write needs num_sifr strictly greater than package.count to stay in
bounds -- num_sifr == package.count passes the existing check but
still overflows by one element.
This is exactly the case probe()'s existing num_sifr++ workaround
("Some DSDT-s have an off-by-one bug where the SINF package count is
one higher than the SQTY reported value") is written to accommodate:
when a DSDT's SINF package count equals SQTY+1, the workaround makes
num_sifr equal to package.count, which is precisely the boundary that
overflows here. Found via UBSan (array-index-out-of-bounds) on
hardware where HKEY.SQTY returns 37 and HKEY.SINF()'s package has 38
elements: num_sifr becomes 38 after the += 1 workaround, the loop
correctly fills indices 0..37, and the sentinel write then targets
index 38, one past the end -- a silent 4-byte heap overflow on kernels
without CONFIG_UBSAN.
Tightening the rejection check to num_sifr <= package.count would
avoid the overflow but breaks probe() entirely on exactly this
hardware, since num_sifr == package.count is the case the off-by-one
workaround exists to support. Nothing else in the driver reads this
sentinel value back, so simply skip the write when there is no room
for it instead. |
| Inclusion of functionality from an untrusted control sphere in the Kiro Powers feature in Amazon Kiro IDE before version 0.8.135 might allow remote unauthenticated actors to obtain sensitive information from a developer workstation. Crafted repository content can cause the agent to modify the workspace settings file, which redirects the Kiro Powers registry request to an actor controlled endpoint and sends workspace data to that endpoint when the Powers panel is opened.
To remediate this issue, users should upgrade to Kiro IDE version 0.8.135 or later. Users who opened a project in an earlier version should also rotate any credentials that were present in that project. |
| A flaw was found in `multipathd`. A local attacker with access to the `multipathd` UNIX control socket can exploit this vulnerability by sending valid commands and then ceasing to read replies. This action can cause the `multipathd` listener thread to block, leading to a Denial of Service (DoS) where legitimate Inter-Process Communication (IPC) operations may hang or time out. This issue does not result in privilege escalation, arbitrary code execution, or impact data confidentiality or integrity. |
| MoguBlog through 6.2 exposes Elasticsearch index management endpoints in the mogu_search service without authentication, allowing remote attackers to delete, recreate, or alter the blog search index. Attackers can invoke POST endpoints to wipe the entire search index, delete specific documents, or inject malicious index entries, causing search functionality to return incorrect or no results. |
| AVideo through commit c3edcc274c389816d434acadac07ee78eaf330c1 contains a stored cross-site scripting vulnerability in the Bookmark plugin where chapter names are not encoded before being concatenated into public watch-page HTML. A video owner can inject malicious scripts via the bookmark name parameter, and every visitor of that video executes the payload in the AVideo origin. |
| WWBN AVideo through commit c3edcc274c389816d434acadac07ee78eaf330c1 contains a reflected cross-site scripting vulnerability in confirmLivePassword.php that copies REQUEST_URI into a form action attribute without encoding. Attackers can craft a malicious URL with a quote character to break out of the action attribute and inject event handlers that execute in the victim's browser within the site origin. |
| Forgejo before 16.0.4 allows use of restricted API tokens for unintended access to the "allow maintainer edit" feature. |
| An unrecovered panic in the event stream header decoder in Amazon AWS SDK for Go v2 before release-2026-03-23 might allow an unauthenticated remote actor to terminate the consuming application process via a crafted event stream response frame containing a header value type outside the valid range.
To remediate this issue, users should upgrade to release-2026-03-23 or later, and patch any forked or derivative code. |
| knowns through 0.33.0 fails to confine the path argument of the code.find MCP tool to the project root, allowing AI agent sessions to read source files anywhere on the host. Attackers can supply absolute paths or relative traversal sequences to the path argument and retrieve full file contents from outside the intended project directory. |
| CyberPanel before 3.0.5 fails to enforce two-factor authentication on API endpoints, allowing attackers to bypass TOTP requirements using password-derived tokens. Attackers who obtain an administrator's password can derive API tokens and perform administrative operations or create authenticated sessions without the second factor. |
| OpenPanel through commit cd24bb8 contains an SQL injection vulnerability in the analytics filter builder that fails to validate profile.* filter column identifiers before interpolating them into ClickHouse WHERE clauses. An authenticated attacker with project-scoped read or root export credentials can inject arbitrary ClickHouse SQL to bypass project isolation and read other organizations' analytics data and profile PII via blind boolean oracle techniques. |
| The ANJIA AJL33PC0801 IP camera uses a hard-coded credential for bootloader authentication. An attacker with physical access to the device may leverage this weakness to gain privileged bootloader access, allowing unauthorized modification of firmware and system configuration and potentially resulting in complete device compromise. |
| Concrete CMS before 9.5.3 evaluated the authorization check for an Express entry submission against the entity of the posted form rather than the entity identified by the dashboard route. As a result, a user permitted to add entries to one Express object could create entries in a different Express object outside their authorization scope, potentially polluting protected datasets, triggering workflows, or injecting content into administrative processes. The dashboard submit route resolved the mutated entity from the attacker-controlled route ID while the permission check validated the independently posted form's entity, and the submission proceeded because the two entities were never compared. The Concrete CMS security team gave this vulnerability a CVSS v4.0 score of 5.1 with vector CVSS:4.0/AV:N/AC:L/AT:N/PR:H/UI:N/VC:N/VI:L/VA:N/SC:N/SI:N/SA:N. Thanks Yonatan Drori from Tenzai for reporting. |
| CWE-522: Insufficiently Protected Credentials vulnerability that could result in exposure of authentication information and unauthorized access to RTU functionality. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: think-lmi: Free system certificate signatures
Multi-certificate support also allows the system authentication object
to store ->signature and ->save_signature, which leak when the driver is
removed. Free the signatures to avoid leaking memory. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: sensorhub: Bound the EC-reported sensor number
Each EC FIFO event carries an 8-bit sensor number (in->sensor_num).
cros_ec_sensorhub_ring_handler() validates the FIFO event count, the
per-read count and the ring bound, but not the sensor number, which
cros_ec_sensor_ring_process_event() then uses unchecked to index
sensorhub->batch_state[] - allocated with only sensorhub->sensor_num
entries. A sensor number of sensor_num or larger is an out-of-bounds
read and write of batch_state[].
Validate the sensor number in the ring handler, where each event is read
from the EC, and drop a malformed event before it is used. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd/pmc: Propagate SMU errors and validate S2D address
amd_stb_s2d_init() discards the return value of several S2D SMU commands.
When the SMU refuses a command (e.g. "SMU cmd failed. err: 0xff") the
failure is only noticed indirectly - if at all - and reported as -EIO,
masking the real error.
More seriously, the S2D_PHYS_ADDR_LOW/HIGH return values are ignored, so
on failure phys_addr_low/hi are left uninitialised and the assembled
address is passed straight to devm_ioremap(). When the SMU leaves them at
zero this maps physical address 0 and trips the ioremap-on-RAM warning:
amd_pmc AMDI000B:00: SMU cmd failed. err: 0xff
ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff
WARNING: CPU: 13 PID: 4592 at arch/x86/mm/ioremap.c:...
Check the return value of each SMU command and propagate it, and reject a
zero physical address before calling devm_ioremap(). |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd/pmc: Fix LPS0 and debugfs leaks when STB init fails
amd_pmc_probe() registers the LPS0 s2idle handler with
acpi_register_lps0_dev() and creates the driver's debugfs directory before
calling amd_stb_s2d_init(), which is the last step in probe that can fail.
When amd_stb_s2d_init() fails (for example the S2D telemetry region cannot
be ioremapped on a long-running system, or the SMU rejects the S2D setup)
the error path only calls pci_dev_put() and returns. This leaves
amd_pmc_s2idle_dev_ops on the global lps0_s2idle_devops_head list and leaks
the debugfs directory, while the devm-managed resources backing the handler
are torn down.
Reloading the module then walks the corrupted list in
acpi_register_lps0_dev() and hits:
list_add corruption. next->prev should be prev, but was NULL.
kernel BUG at lib/list_debug.c:29!
acpi_register_lps0_dev+0x44/0x80
amd_pmc_probe+0x224/0x380 [amd_pmc]
platform_probe+0x67/0x90
Even without a reload, the stale registration means the next s2idle
transition calls into torn-down driver state.
Unwind the debugfs directory and the LPS0 registration on the
amd_stb_s2d_init() error path. acpi_unregister_lps0_dev() is safe to call
unconditionally here: it is guarded on the same conditions as
acpi_register_lps0_dev(), which is exactly what amd_pmc_remove() already
relies on. |
