Export limit exceeded: 390708 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (390708 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-81015 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Fix LPS0 and debugfs leaks when STB init fails amd_pmc_probe() registers the LPS0 s2idle handler with acpi_register_lps0_dev() and creates the driver's debugfs directory before calling amd_stb_s2d_init(), which is the last step in probe that can fail. When amd_stb_s2d_init() fails (for example the S2D telemetry region cannot be ioremapped on a long-running system, or the SMU rejects the S2D setup) the error path only calls pci_dev_put() and returns. This leaves amd_pmc_s2idle_dev_ops on the global lps0_s2idle_devops_head list and leaks the debugfs directory, while the devm-managed resources backing the handler are torn down. Reloading the module then walks the corrupted list in acpi_register_lps0_dev() and hits: list_add corruption. next->prev should be prev, but was NULL. kernel BUG at lib/list_debug.c:29! acpi_register_lps0_dev+0x44/0x80 amd_pmc_probe+0x224/0x380 [amd_pmc] platform_probe+0x67/0x90 Even without a reload, the stale registration means the next s2idle transition calls into torn-down driver state. Unwind the debugfs directory and the LPS0 registration on the amd_stb_s2d_init() error path. acpi_unregister_lps0_dev() is safe to call unconditionally here: it is guarded on the same conditions as acpi_register_lps0_dev(), which is exactly what amd_pmc_remove() already relies on. | ||||
| CVE-2026-81014 | 1 Linux | 1 Linux Kernel | 2026-09-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix heap OOB read in sk_store() and kek_store() sk_store() and kek_store() strip a trailing newline from the sysfs write before allocating the key buffer: length = count; if (buf[length - 1] == '\n') length--; bioscfg_drv.spm_data.signing_key = kmemdup(buf, length, GFP_KERNEL); but then pass the original "count" (not "length") as the copy size to hp_wmi_perform_query(), which memcpy()s that many bytes out of the "length"-sized allocation, reading one byte past it whenever the write ends in a newline, the normal case for a shell "echo" into sysfs. KASAN confirms this directly: BUG: KASAN: slab-out-of-bounds in hp_wmi_perform_query+0x1e9/0x460 [hp_bioscfg] Read of size 28 at addr ffff88813c8e2b80 by task python3/16022 ... sk_store+0xa7/0x240 [hp_bioscfg] kernfs_fop_write_iter+0x3e1/0x5d0 ... The buggy address is located 0 bytes inside of allocated 27-byte region [ffff88813c8e2b80, ffff88813c8e2b9b) Reproduced identically for kek_store, and at multiple write sizes (28, 57, 201 bytes), each time reading exactly one byte past a kmemdup() allocation one byte smaller than the write. Fix by passing "length" instead of "count" to hp_wmi_perform_query() in both functions. | ||||
| CVE-2026-81013 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix heap OOB read on empty password write validate_password_input() computes length = strlen(buf) and then checks buf[length - 1] to strip a trailing newline, without checking that length is nonzero first. Writing an empty string (a bare '\n') to current_password or new_password gives length == 0, and buf[length - 1] reads buf[-1], one byte before the heap allocation holding the copied input. KASAN confirms this directly: BUG: KASAN: slab-out-of-bounds in store_password_instance.constprop.0+0x223/0x2a0 [hp_bioscfg] Read of size 1 at addr ffff88811bd8da9f by task sh/13740 ... store_password_instance.constprop.0+0x223/0x2a0 [hp_bioscfg] current_password_store+0x14/0x20 [hp_bioscfg] ... The buggy address is located 23 bytes to the right of allocated 8-byte region [ffff88811bd8da80, ffff88811bd8da88) Reproduced identically via new_password_store. Execution continues past the bad read (the garbage byte only affects whether "length" is decremented by one), so the write completes and returns success; this is a pure information read past the buffer, not a crash, but it is still an out-of-bounds access KASAN correctly flags. Fix by only checking buf[length - 1] when length is nonzero. | ||||
| CVE-2026-81012 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix off-by-one write in hp_get_string_from_buffer() hp_get_string_from_buffer() clamps the converted string length against the destination buffer size with "size > dst_size", so when the converted length is exactly equal to dst_size, conv_dst_size is left at dst_size and the unconditional NUL terminator write dst[conv_dst_size] = 0; lands one byte past the destination buffer. This is the same shape of bug as the previously fixed off-by-one in hp_convert_hexstr_to_str(): the buffer is sized correctly for the content, but the terminator write is never checked against that size. Fix by changing the comparison to ">=" so conv_dst_size is always left with room for the terminator. All fixed-size destinations that reach this function (path[512], current_value[512], current_password/current_value[64], and the per-entry buffers in encodings[][512] and prerequisites[][512]) are affected. | ||||
| CVE-2026-81011 | 1 Linux | 1 Linux Kernel | 2026-09-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: pass validated element count to package parsers The per-type package parsers are handed the wrong element count. hp_init_bios_package_attribute() validates obj->package.count and then calls one of the five hp_populate_*_package_data() wrappers (string, integer, enumeration, ordered list, password). Each wrapper forwards a count to its hp_populate_*_elements_from_package() parser, but instead of forwarding the validated obj->package.count it derives the count from elements[0]. elements[0] is the NAME field and is always an ACPI_TYPE_STRING, so reading ->package.count from it in fact reads ->string.length through the union acpi_object. The parsers thus bound themselves against the length of the name string rather than against the real number of elements in the package. This is safe today because hp_init_bios_package_attribute() refuses any package that has fewer than the type's element count, so a parser only ever runs on a full package and never reads past it regardless of the bogus bound. An upcoming change relaxes that check to accept shorter packages. Once a parser can receive fewer elements than its per-type count, a bound taken from the name length no longer reflects the array size, and the "elem < count" loop conditions and "elem + n >= count" sub-loop guards read past the end of elements[] - an out-of-bounds heap read. Forward the validated obj->package.count to every *_package_data() wrapper so the parsers bound themselves against the real package size. This does not change behaviour for the packages that enumerate correctly today and is a prerequisite for accepting shorter packages safely. | ||||
| CVE-2026-81010 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/waitid: honor task_work cancellation io_waitid_cb() may run through the fallback task_work path when task_work_add() can no longer queue work to the originating task. The fallback runs from a kworker and io_uring marks such task work as canceled through tw.cancel. io_waitid_cb() currently ignores tw.cancel and calls __do_wait(). waitid is task-context dependent: __do_wait() performs child lookup relative to current, and the retry path also uses current->signal->wait_chldexit. If the callback runs from the fallback kworker, current is therefore not the task that submitted the request. Honor tw.cancel before entering __do_wait(). Complete the request with -ECANCELED and skip the siginfo copy, since canceled task work may run without the submitting task's userspace execution context. Keep the existing siginfo handling for normal waitid completion and explicit cancellation. | ||||
| CVE-2026-81009 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/query: cap user size passed to copy_struct_to_user io_handle_query_entry() clamps hdr.size for the inbound copy_from_user() but keeps the original user value as usize. copy_struct_to_user() uses that usize and, when it is larger than the kernel result, clear_user()s the trailing bytes. As hdr.size is a __u32, a query can request nearly 4 GiB of zeroing, including on the error path where res_size stays 0. The interface is reachable without a ring via IORING_REGISTER_QUERY. Reject sizes larger than PAGE_SIZE, as recommended for copy_struct_* interfaces. | ||||
| CVE-2026-81008 | 1 Linux | 1 Linux Kernel | 2026-09-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: interconnect: Fix use after free in icc_get() and of_icc_get_by_index() In of_icc_get_by_index() and icc_get(), if the dynamic allocation for path->name fails via kasprintf(), the error handling path directly calls kfree(path) to free the path object and returns an error. However, prior to this point, path_find() calls path_init(), which already links the path's requests into the req_list of the respective interconnect nodes via hlist_add_head(). Directly invoking kfree(path) leaves dangling pointers in the hlist. A subsequent call to icc_get() or icc_set_bw() will traverse or modify these corrupted lists, triggering a slab use afterfree. KASAN report showing the vulnerability when reproducing via debugfs: BUG: KASAN: slab-use-after-free in path_find+0x6f8/0xcfc Write of size 8 at addr fff000000d43f748 by task sh/1 ... Call trace: kasan_report+0xac/0xfc path_find+0x6f8/0xcfc icc_get+0x148/0x380 icc_get_set+0xf8/0x2d0 ... Freed by task 1: kfree+0x1a0/0x4a4 icc_get+0x2cc/0x380 icc_get_set+0xf8/0x2d0 Fix this by replacing kfree(path) with the proper teardown function, icc_put(path), which safely removes the requests from the req_list using hlist_del() and drops the provider usage references before freeing the memory. Additionally, in icc_get(), ensure that the icc_lock mutex is released prior to calling icc_put(path) to avoid a deadlock, as icc_put() internally acquires the same lock. | ||||
| CVE-2026-81007 | 1 Linux | 1 Linux Kernel | 2026-09-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: ipmb: validate write message length ipmb_write() read message fields before validating the length byte. A zero or short write can read uninitialized stack bytes. A length smaller than the SMBus header underflows the block write length. Require a non-empty buffer and the minimum IPMB request length. Also require the length byte plus payload before parsing the message. | ||||
| CVE-2026-81006 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: Remove all sysfs files on registration failure ipmi_add_smi() creates the nr_users and nr_msgs files before trying to create the maintenance_mode file. If that last creation fails, the error path removes only nr_users before dropping the final reference to the interface. Remove nr_msgs as well so no sysfs attribute embedded in the freed interface remains registered. | ||||
| CVE-2026-81005 | 1 Linux | 1 Linux Kernel | 2026-09-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: si: Fix NULL pointer dereference after failed registration try_smi_init() allocates new_smi->si_sm and later calls ipmi_register_smi_mod(), which maps to ipmi_add_smi(). During ipmi_add_smi(), the upper IPMI message handler obtains the initial BMC device information through __bmc_get_device_id(). This can fail if the BMC does not return a successful response to the Get Device ID command. When the BMC returns a nonzero completion code, the device-id helper retries the command and eventually returns -EIO if the device ID still cannot be fetched. On this failure path, ipmi_add_smi() logs "Unable to get the device id" and goes to out_err_started, where it invokes the lower driver's shutdown callback. try_smi_init() then logs the returned registration failure: ipmi_si IPI0001:00: IPMI message handler: Unable to get the device id: -5 ipmi_si IPI0001:00: Unable to register device: error -5 For ipmi_si, the shutdown callback is shutdown_smi(), which cleans up the SI state machine data, frees smi_info->si_sm, and sets smi_info->si_sm and smi_info->intf to NULL. However, intf->in_shutdown is not set on this failed-registration rollback path. Therefore, the asynchronous redo_bmc_reg work item can still retry BMC device-id probing after the lower driver has already cleared its SI state machine data. In the observed case, that retry path reached start_next_msg(), which passed the NULL smi_info->si_sm pointer to the selected KCS state machine handler: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 Workqueue: events redo_bmc_reg [ipmi_msghandler] RIP: start_kcs_transaction+0x2c/0x190 [ipmi_si] Call Trace: start_next_msg+0x50/0x80 [ipmi_si] check_start_timer_thread.part.9+0x3b/0x50 [ipmi_si] sender+0x69/0x80 [ipmi_si] i_ipmi_request+0x2ac/0x9d0 [ipmi_msghandler] __get_device_id.isra.29+0xaa/0x180 [ipmi_msghandler] __bmc_get_device_id+0xef/0x950 [ipmi_msghandler] redo_bmc_reg+0x52/0x60 [ipmi_msghandler] process_one_work+0x1a7/0x360 Set intf->in_shutdown on the out_err_started path before invoking the lower driver's shutdown callback. This prevents later redo_bmc_reg retries from using an interface whose lower driver state has been cleaned up, and applies the same shutdown state to other IPMI interfaces as well. | ||||
| CVE-2026-81004 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmi:msghandler: Cancel work cleanly on an error If an error occurs during startup of an IPMI interface, it may have scheduled work to run. The work needs to be canceled before the interface can be freed. | ||||
| CVE-2026-81003 | 1 Linux | 1 Linux Kernel | 2026-09-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/iucv: filter frames in afiucv_hs_rcv() by ingress device afiucv_hs_rcv() selects a socket from iucv_sk_list by matching four 8-byte name fields in the transport header alone. No check is made against the net_device the frame arrived on. This can cause a frame arriving on any netdev to be delivered to an AF_IUCV socket. Three problems follow. First, a frame arriving over HiperSockets can be delivered to a socket bound to the classic z/VM IUCV transport, which has iucv->hs_dev == NULL. iucv_sock_bind() takes the classic path whenever the requested userid matches iucv_userid, even on a guest that also has a HiperSockets device carrying the same identifier. The child socket created by afiucv_hs_callback_syn() for such a match inherits hs_dev = NULL and transport = AF_IUCV_TRANS_HIPER, so the first send() on it returns -ENODEV. The socket delivered to accept() is unusable. Second, a frame arriving on one netdev can be delivered to a socket bound to a different IQD device. Which can lead to - Accept-queue exhaustion (DoS) - Attacker-controlled peer identity in the child socket - Data injection into existing sockets - Fabric noise on the IQD fabric, where bogus replies are sent - killing established connections Third, all AF_IUCV sockets live in init_net, as iucv_sock_alloc() calls sk_alloc(&init_net, ...). But even frames arriving on netdev devices in a namespace can be delivered to an IUCV socket. So a process in an unprivileged user and network namespace holding only the CAP_NET_RAW capability valid within that namespace can send a raw ETH_P_AF_IUCV frame on its own lo device and have it matched against init_net sockets. Fix all three by skipping any socket whose hs_dev does not match the ingress device. A classic z/VM IUCV socket has hs_dev == NULL; the ingress dev is never NULL, so classic sockets are skipped automatically. An unbound HIPER socket also has hs_dev == NULL and is skipped. A bound HIPER socket is only reachable from the exact IQD device it was bound to. Because hs_dev is always a device in init_net (iucv_sock_bind() scans for_each_netdev_rcu(&init_net, ...) exclusively), a frame whose ingress device belongs to another namespace never matches any socket. Note that AF_IUCV over HiperSockets provides no per-connection authentication: no sequence numbers, no TLS, no nonce. The four name fields identifying a connection are exchanged in plaintext on the shared HiperSockets segment (VCHID). Any host on the same HiperSockets segment could spoof any frame type against an existing connection. That is a protocol-level property unchanged by this patch. The fix reduces the attack surface to peers present on the same HiperSockets segment. | ||||
| CVE-2026-81002 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xdp: fix zero-copy frame layout xdp_convert_zc_to_xdp_frame() clones an XSK packet into an order-0 page and advertises PAGE_SIZE as its frame size. It allows the copied frame to occupy the page tail needed by skb_shared_info and records zero headroom even when metadata separates the frame header from packet data. An AF_XDP zero-copy packet redirected through cpumap can therefore make the skb overlap skb_shared_info or place it beyond the allocated page. Limit the copied layout to SKB_WITH_OVERHEAD(PAGE_SIZE) and include the metadata length in frame headroom. Redirect callers already handle a NULL conversion result. BUG: KASAN: slab-out-of-bounds in skb_gro_receive Write of size 4 at addr ffff88800cf37004 by task cpumap/1/map:1/146 Call Trace: skb_gro_receive (net/core/gro.c:174) udp_gro_receive (net/ipv4/udp_offload.c:812) inet_gro_receive (net/ipv4/af_inet.c:1539) dev_gro_receive (net/core/gro.c:515) gro_receive_skb (net/core/gro.c:633) cpu_map_kthread_run (kernel/bpf/cpumap.c:395) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:164) ret_from_fork_asm (arch/x86/entry/entry_64.S:255) Kernel panic - not syncing: KASAN: panic_on_warn set ... | ||||
| CVE-2026-81001 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: slip: fix use-after-free in sl_sync() slip_devs[] stores bare net_device pointers and takes no reference on them. sl_sync() and sl_alloc() walk that table from slip_open() under rtnl_lock(), while an entry is dropped by sl_free_netdev(), which sl_setup() installs as dev->priv_destructor. priv_destructor is called from netdev_run_todo(), which deliberately runs with the RTNL semaphore released so that it can sleep while waiting for the device refcount to drop: /* Snapshot list, allow later requests */ list_replace_init(&net_todo_list, &list); __rtnl_unlock(); ... if (dev->priv_destructor) dev->priv_destructor(dev); /* slip_devs[i] = NULL */ if (dev->needs_free_netdev) free_netdev(dev); ... /* Free network device */ kobject_put(&dev->dev.kobj); So rtnl_lock() does not serialise slip_open() against the teardown at all. sl_sync() can load slip_devs[i] while the entry is still published and dereference it after netdev_run_todo() has run the destructor and released the device: CPU0 (slip_open) CPU1 (slip_close) unregister_netdev() rtnl_unlock() netdev_run_todo() __rtnl_unlock() rtnl_lock() sl_sync() dev = slip_devs[i] priv_destructor(dev) slip_devs[i] = NULL kobject_put(&dev->dev.kobj) /* dev is freed */ sl = netdev_priv(dev) if (sl->tty || sl->leased) /* use-after-free */ BUG: KASAN: use-after-free in sl_sync drivers/net/slip/slip.c:730 [inline] BUG: KASAN: use-after-free in slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806 Read of size 1 at addr ffff8880712dac71 by task syz-executor.2/6506 CPU: 2 PID: 6506 Comm: syz-executor.2 Not tainted 6.1.134-syzkaller-00260-g0c8fc3469765 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: sl_sync drivers/net/slip/slip.c:730 [inline] slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806 tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433 tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564 tiocsetd drivers/tty/tty_io.c:2428 [inline] tty_ioctl+0x5f0/0x1530 drivers/tty/tty_io.c:2712 Allocated by task 6502: alloc_netdev_mqs+0x98/0xfe0 net/core/dev.c:10719 sl_alloc drivers/net/slip/slip.c:756 [inline] slip_open+0x36d/0x1210 drivers/net/slip/slip.c:817 tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433 tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564 Freed by task 6497: device_release+0xa2/0x240 drivers/base/core.c:2507 kobject_put+0x179/0x280 lib/kobject.c:729 netdev_run_todo+0x6c8/0xef0 net/core/dev.c:10509 slip_close+0x166/0x1c0 drivers/net/slip/slip.c:906 tty_ldisc_close+0x113/0x1a0 drivers/tty/tty_ldisc.c:456 tty_ldisc_kill+0x94/0x160 drivers/tty/tty_ldisc.c:614 tty_ldisc_release+0xe3/0x2b0 drivers/tty/tty_ldisc.c:782 tty_release+0xbcc/0xe70 drivers/tty/tty_io.c:1860 Commit e58c19124189 ("slip: Fix use-after-free Read in slip_open") fixed a different source of stale entries - a device left in slip_devs[] after slip_open() freed it on the registration error path - and does not address this race, which is why the report survives it. Drop the entry from ndo_uninit instead. unregister_netdevice() calls ndo_uninit under RTNL, before the device is queued to netdev_run_todo(), so an entry that sl_sync() can still see while holding RTNL belongs to a device that cannot be freed until RTNL is dropped. sl_free_netdev() stays only for the slip_open() error path, where register_netdevice() may have failed before ndo_init and ndo_uninit is then not called either. Both running for the same device is harmless: the ---truncated--- | ||||
| CVE-2026-81000 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: tun: bound receive headroom tun_get_user() uses tun->align both as skb headroom and when choosing how much packet data to keep linear. OVS can propagate an oversized headroom request from another port to TUN or TAP. When align is larger than the usable space in a one-page skb head, SKB_MAX_HEAD(align) underflows and the result becomes negative when stored in good_linear. That value later wraps when assigned to the size_t linear variable, and tun_alloc_skb() can place skb->data outside the allocated head. Bound the headroom stored by TUN to the one-page skb-head budget and the largest non-sentinel 16-bit skb header offset. Leave one linear byte for raw TUN and a complete Ethernet header for TAP, including NET_IP_ALIGN. Also pull the raw-TUN protocol byte and the TAP Ethernet header before accessing them, so these checks remain safe for nonlinear skbs supplied by other allocation paths. | ||||
| CVE-2026-80999 | 1 Linux | 1 Linux Kernel | 2026-09-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO rtl83xx_reset_assert() and rtl83xx_reset_deassert() are only called from the probe path, which may sleep and is not timing-critical. When the reset GPIO is provided by a sleeping controller such as an I2C I/O expander, gpiod_set_value() warns: WARNING: drivers/gpio/gpiolib.c:4030 at gpiod_set_value+0x44/0x80, CPU#1: kworker/u16:4/61 Hardware name: B&O MAP CA33 Rev f (UNKNOWN) (DT) Workqueue: events_unbound deferred_probe_work_func pc : gpiod_set_value+0x44/0x80 lr : rtl83xx_probe+0x1d8/0x3a0 Call trace: gpiod_set_value+0x44/0x80 (P) rtl83xx_probe+0x1d8/0x3a0 realtek_mdio_probe+0x24/0xa0 mdio_probe+0x38/0x78 really_probe+0xc4/0x3e0 __driver_probe_device+0x15c/0x1b8 driver_probe_device+0xb4/0x120 __device_attach_driver+0xb8/0x1a0 bus_for_each_drv+0x88/0xf0 __device_attach+0xa0/0x1d8 device_initial_probe+0x54/0x68 bus_probe_device+0x38/0xa0 deferred_probe_work_func+0xb8/0x120 process_one_work+0x184/0x4e8 worker_thread+0x188/0x308 kthread+0x130/0x150 ret_from_fork+0x10/0x20 Switch both helpers to gpiod_set_value_cansleep() so such a reset GPIO can be used without triggering the warning. The reset GPIO has been driven with the non-sleeping gpiod_set_value() since the driver was added in v4.19. The call has since been refactored across several files - from realtek-smi.c / realtek-mdio.c into the common rtl83xx.c module and then into the rtl83xx_reset_assert() and rtl83xx_reset_deassert() helpers (both in v6.9). This patch therefore applies as-is only to kernels that carry those helpers (v6.9+); older stable kernels need the same gpiod_set_value_cansleep() conversion at the corresponding open-coded call sites. | ||||
| CVE-2026-80998 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bnxt: ring the doorbell when SW USO exits early When a burst of packets is handed down to the driver, the driver defers the doorbell to the end by setting txr->kick_pending = 1. The normal TX path handles this, but the SW USO path can miss it if it returns early. If bnxt_sw_udp_gso_xmit runs but returns early with NETDEV_TX_BUSY and txr->kick_pending was previously set to 1, then the TX queue can stall because the driver wrote some BDs but never wrote the doorbell. The device won't know to do the TX which would generate the completion that would wake the queue back up. Simplify bnxt_sw_udp_gso_xmit to set txr->kick_pending in its success case and check the flag on return. The added check after bnxt_sw_udp_gso_xmit returns ensures that any pending doorbells are written handling both successful USO and any early returns, which prevents the TX queue stall mentioned above. This TX queue stall was observed on a production system with a netdev TX watchdog informing about the queue stall. | ||||
| CVE-2026-80997 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ipa: fix stalled modem TX queue after runtime resume ipa_start_xmit() unconditionally stops the TX queue before calling pm_runtime_get(), relying on the wake scheduled by runtime resume (ipa_modem_wake_queue_work()) to restart it once power is ACTIVE. But that work is queued from within the runtime resume callback, before the device's power state reaches RPM_ACTIVE, so it can run while the device is still RPM_RESUMING. The wake is then consumed too early: the transmit it restarts stops the queue again, pm_runtime_get() returns -EINPROGRESS without arranging any future wake (deferred_resume exists only for RPM_SUSPENDING), and after the resume completes nothing is left to wake the queue. Transmit stalls permanently: packets pile up in the qdisc behind the stopped queue, the device runtime-suspends, and since the netdev registers no ndo_tx_timeout the watchdog never fires. Observed on SM7635 (Fairphone 6) as the cellular data path going permanently deaf within hours, RX included, since nothing resumes the suspended endpoints. Close the window by making the wake work wait for the resume to complete (pm_runtime_get_sync()) before waking the queue. Every queue stop is then guaranteed a later wake that happens while power is ACTIVE; a transmit racing a new suspend/resume cycle re-schedules the work. If the device could not be resumed, wake the queue anyway so pending packets are dropped by the transmit path rather than stranded. The STARTED power flag used to narrow this window: a wake running before the transmit path's stop suppressed that stop, but only once, as the flag was cleared by the first stop it absorbed. Removing the flag made a single transmit during an in-flight resume sufficient to strand the queue, which is the form observed. With an accelerated reproducer (autosuspend delay shortened to 5 ms, ~20 packets/s of TX), an unpatched kernel stalled three times in 230 s / 4380 packets; with this patch the same test ran 3601 s / 70298 packets without a stall. | ||||
| CVE-2026-80996 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: l2tp: do not propagate multicast notification errors The tunnel create, tunnel modify, session create, and session modify netlink handlers send multicast notifications through helpers that can fail while allocating or encoding a message, or while multicasting it. For tunnel and session create/modify, a notification is sent after the live operation has completed. Returning a best-effort notification error as the command result can therefore report failure for an operation that already committed and can cause callers to retry and accumulate live objects. Keep sending notifications for listener visibility, but do not propagate their best-effort status as the command result. This also keeps the tunnel modify command consistent with the other notification-only paths. | ||||