| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incorrect access control in the dynawebservice component of agorum Software GmbH Agorum core open v11.9.2 & v11.10.1 allows unauthenticated attackers to access arbitrary files on the system. |
| Potential vulnerabilities have been identified in the HP Display Control software component within the HP Application Enabling Software Driver which might allow escalation of privilege. |
| Improper access control for some BigDL software maintained by Intel(R) before version 2.5.0 may allow an authenticated user to potentially enable escalation of privilege via adjacent access. |
| An Improper Access Control could allow a malicious actor authenticated in the API to enable Android Debug Bridge (ADB) and make unsupported changes to the system.
Affected Products:
UniFi Connect EV Station (Version 1.1.18 and earlier)
UniFi Connect EV Station Pro (Version 1.1.18 and earlier)
UniFi Access G2 Reader Pro (Version 1.2.172 and earlier)
UniFi Access Reader Pro (Version 2.7.238 and earlier)
UniFi Access Intercom (Version 1.0.66 and earlier)
UniFi Access Intercom Viewer (Version 1.0.5 and earlier)
UniFi Connect Display (Version 1.9.324 and earlier)
UniFi Connect Display Cast (Version 1.6.225 and earlier)
Mitigation:
Update UniFi Connect Application to Version 3.10.7 or later.
Update UniFi Connect EV Station to Version 1.2.15 or later.
Update UniFi Connect EV Station Pro to Version 1.2.15 or later.
Update UniFi Access G2 Reader Pro Version 1.3.37 or later.
Update UniFi Access Reader Pro Version 2.8.19 or later.
Update UniFi Access Intercom Version 1.1.32 or later.
Update UniFi Access Intercom Viewer Version 1.1.6 or later.
Update UniFi Connect Display to Version 1.11.348 or later.
Update UniFi Connect Display Cast to Version 1.8.255 or later. |
| An Improper Certificate Validation could allow a malicious actor with access to an adjacent network to take control of the system.
Affected Products:
UniFi Connect Application (Version 3.7.9 and earlier)
UniFi Connect EV Station (Version 1.1.18 and earlier)
UniFi Connect EV Station Pro (Version 1.1.18 and earlier)
UniFi Connect Display (Version 1.9.324 and earlier)
UniFi Connect Display Cast (Version 1.6.225 and earlier)
Mitigation:
Update UniFi Connect Application to Version 3.10.7 or later.
Update UniFi Connect EV Station to Version 1.2.15 or later.
Update UniFi Connect EV Station Pro to Version 1.2.15 or later.
Update UniFi Connect Display to Version 1.11.348 or later.
Update UniFi Connect Display Cast to Version 1.8.255 or later.
|
| An Authentication Bypass Using an Alternate Path or Channel vulnerability in Juniper Networks Session Smart Router or conductor running with a redundant peer allows a network based attacker to bypass authentication and take full control of the device.
Only routers or conductors that are running in high-availability redundant configurations are affected by this vulnerability.
No other Juniper Networks products or platforms are affected by this issue.
This issue affects:
Session Smart Router:
* All versions before 5.6.15,
* from 6.0 before 6.1.9-lts,
* from 6.2 before 6.2.5-sts.
Session Smart Conductor:
* All versions before 5.6.15,
* from 6.0 before 6.1.9-lts,
* from 6.2 before 6.2.5-sts.
WAN Assurance Router:
* 6.0 versions before 6.1.9-lts,
* 6.2 versions before 6.2.5-sts. |
| BloodX 1.0 contains an authentication bypass vulnerability in login.php that allows attackers to access the dashboard without valid credentials. Attackers can exploit the vulnerability by sending a crafted payload with '=''or' parameters to bypass login authentication and gain unauthorized access. |
| DCIM dcTrack allows an attacker to misuse certain remote access features. An authenticated user with access to the appliance's virtual console could exploit these features to redirect network traffic, potentially accessing restricted services or data on the host machine. |
| A lack of session validation in the web API component of Shenzhen Zhibotong Electronics ZBT WE2001 23.09.27 allows remote unauthenticated attackers to access administrative information-retrieval functions intended for authenticated users. By invoking "get_*" operations, attackers can obtain device configuration data, including plaintext credentials, without authentication or an existing session. |
| sudo-rs is a memory safe implementation of sudo and su written in Rust. With `Defaults targetpw` (or `Defaults rootpw`) enabled, the password of the target account (or root account) instead of the invoking user is used for authentication. sudo-rs starting in version 0.2.5 and prior to version 0.2.10 incorrectly recorded the invoking user’s UID instead of the authenticated-as user's UID in the authentication timestamp. Any later `sudo` invocation on the same terminal while the timestamp was still valid would use that timestamp, potentially bypassing new authentication even if the policy would have required it. A highly-privileged user (able to run commands as other users, or as root, through sudo) who knows one password of an account they are allowed to run commands as, would be able to run commands as any other account the policy permits them to run commands for, even if they don't know the password for those accounts. A common instance of this would be that a user can still use their own password to run commands as root (the default behaviour of `sudo`), effectively negating the intended behaviour of the `targetpw` or `rootpw` options. Version 0.2.10 contains a patch for the issue. Versions prior to 0.2.5 are not affected, since they do not offer `Defaults targetpw` or `Defaults rootpw`. |
| Incorrect access control in the Web management interface in Each Italy Wireless Mini Router WIRELESS-N 300M v28K.MiniRouter.20190211 allows attackers to arbitrarily change the administrator username and password via sending a crafted GET request. |
| OpenObserve is a cloud-native observability platform. Prior to version 0.16.0, organization invitation tokens do not expire once issued, remain valid even after the invited user is removed from the organization, and allow multiple invitations to the same email with different roles where all issued links remain valid simultaneously. This results in broken access control where a removed or demoted user can regain access or escalate privileges. This issue has been patched in version 0.16.0. |
| A vulnerability was found in Multilaser Sirius RE016 MLT1.0. It has been rated as problematic. This issue affects some unknown processing of the file /cgi-bin/cstecgi.cgi. The manipulation leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The salt.auth.pki module does not properly authenticate callers. The "password" field contains a public certificate which is validated against a CA certificate by the module. This is not pki authentication, as the caller does not need access to the corresponding private key for the authentication attempt to be accepted. |
| The Registration Forms – User Registration Forms, Invitation-Based Registrations, Front-end User Profile, Login Form & Content Restriction Social Sites Login plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 1.7.9. This is due to insufficient verification on the user being returned by the social login token. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email and the user does not have an already-existing account for the service returning the token. |
| This vulnerability in Grafana's datasource proxy API allows authorization checks to be bypassed by adding an extra slash character in the URL path.
Users with minimal permissions could gain unauthorized read access to GET endpoints in Alertmanager and Prometheus datasources.
The issue primarily affects datasources that implement route-specific permissions, including Alertmanager and certain Prometheus-based datasources. |
| A security vulnerability in the /apis/dashboard.grafana.app/* endpoints allows authenticated users to bypass dashboard and folder permissions. The vulnerability affects all API versions (v0alpha1, v1alpha1, v2alpha1).
Impact:
- Viewers can view all dashboards/folders regardless of permissions
- Editors can view/edit/delete all dashboards/folders regardless of permissions
- Editors can create dashboards in any folder regardless of permissions
- Anonymous users with viewer/editor roles are similarly affected
Organization isolation boundaries remain intact. The vulnerability only affects dashboard access and does not grant access to datasources. |
| Improper Authentication vulnerability in Wikimedia Foundation Mediawiki - CentralAuth Extension allows : Bypass Authentication.This issue affects Mediawiki - CentralAuth Extension: from 1.39.X before 1.39.13, from 1.42.X before 1.42.7, from 1.43.X before 1.43.2. |
| Nokia Single RAN AirScale baseband allows an authenticated administrative user access to all physical boards after performing a single login to the baseband system board. The baseband does not re-authenticate the user when they connect from the baseband system board to the baseband capacity boards using the internal bsoc SSH service, which is available only internally within the baseband and through the internal backplane between the boards. The bsoc SSH allows login from one board to another via the baseband internal backplane using an SSH private key present on the baseband system board.
This bsoc SSH capability was previously considered an administrative functionality but has now been restricted to be available only to baseband root-privileged administrators. This restriction mitigates the possibility of misuse with lower-level privileges (e.g., from baseband software images). This mitigation is included starting from release 23R4-SR 3.0 MP and later |
| External Secrets Operator is a Kubernetes operator that integrates external secret management systems. From version 0.15.0 to before 0.19.2, a vulnerability was discovered where the List() calls for Kubernetes Secret and SecretStore resources performed by the PushSecret controller did not apply a namespace selector. This flaw allowed an attacker to use label selectors to list and read secrets/secret-stores across the cluster, bypassing intended namespace restrictions. An attacker with the ability to create or update PushSecret resources and control SecretStore configurations could exploit this vulnerability to exfiltrate sensitive data from arbitrary namespaces. This could lead to full disclosure of Kubernetes secrets, including credentials, tokens, and other sensitive information stored in the cluster. This vulnerability has been patched in version 0.19.2. A workaround for this issue includes auditing and restricting RBAC permissions so that only trusted service accounts can create or update PushSecret and SecretStore resources. |
