| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Axios is a promise based HTTP client for the browser and Node.js. From 1.0.0 to before 1.16.0, the Axios library is vulnerable to a Prototype Pollution "Gadget" attack that allows any Object.prototype pollution in the application's dependency tree to be escalated into a full Man-in-the-Middle (MITM) attack — intercepting, reading, and modifying all HTTP traffic including authentication credentials. The HTTP adapter at lib/adapters/http.js:670 reads config.proxy via standard property access, which traverses the prototype chain. Because proxy is not present in Axios defaults, the merged config object has no own proxy property, making it trivially injectable via prototype pollution. Once injected, setProxy() routes all HTTP requests through the attacker's proxy server. This vulnerability is fixed in 1.16.0. |
| In versions 3.0.0a1 through 3.2.0 of Mistune, there is a ReDoS (Regular Expression Denial of Service) vulnerability in `LINK_TITLE_RE` that allows an attacker who can supply Markdown for parsing to cause denial of service. The regular expression used for parsing link titles contains overlapping alternatives that can trigger catastrophic backtracking. In both the double-quoted and single-quoted branches, a backslash followed by punctuation can be matched either as an escaped punctuation sequence or as two ordinary characters, creating an ambiguous pattern inside a repeated group. If an attacker supplies Markdown containing repeated ! sequences with no closing quote, the regex engine explores an exponential number of backtracking paths. This is reachable through normal Markdown parsing of inline links and block link reference definitions. A small crafted input can therefore cause significant CPU consumption and make applications using Mistune unresponsive. |
| In Bouncy Castle for Java before 1.85, MLS wire decoder allocates attacker-declared opaque length before bounds check. |
| An issue was discovered in the resolv gem before 0.7.2 for Ruby. Resolv::DNS::MessageEncoder wrote a DNS label's length into a single octet without checking its range. A label longer than 255 octets had its length stored modulo 256 but the label data was written unchanged, and thus the bytes on the wire described a different name than the one the application asked to encode. RFC 1035 section 2.3.4 limits a label to 63 octets, and the two high bits of the length octet are reserved for compression pointers. put_string packed the length with put_pack("C", d.length) and put_label used it for labels, and thus any value from 0 to 255 could end up as a label length octet, including the reserved 0x40-0xBF range and the 0xC0-0xFF pointer range. Resolv::DNS::Name.create did not check per-label or total name length either, and thus an attacker-controlled hostname reached the encoder unchanged. An application that resolves an attacker-controlled hostname sends a query whose wire bytes name a domain the attacker chose. A hostname suffix that the application validates against an allowlist becomes padding that never appears on the wire, and thus allowlist and egress checks can be bypassed. The recursive resolver caches the response under the attacker's name, and DNS logs record that name rather than the one the application asked for. A label length whose low octet lands in the 0xC0-0xFF range produces a length octet that conforming parsers read as the start of a compression pointer, with the following attacker-controlled byte as the offset. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: avoid combining some incoming suboptions
Some MPTCP suboptions are mutually exclusive according to the RFC8684,
but also because in different places, the code doesn't expect some
combinations to be present. That's specially true for suboptions that
would be present twice, but with different attributes.
The new restrictions are the same as the ones applied on the output
side, with mptcp_write_options. The same rules can be reused with a
small fix: an MP_FASTCLOSE can be used with a DSS when the sender picks
this option [1], which is not the case on Linux. Here are the rules:
Which options can be used together?
X: mutually exclusive
O: often used together
C: can be used together in some cases
P: could be used together but we prefer not to (optimisations)
| Opt: | MPC | MPJ | DSS | ADD | RM | PRIO | FAIL | FC |
|------|------|------|------|------|------|------|------|------|
| MPC |------|------|------|------|------|------|------|------|
| MPJ | X |------|------|------|------|------|------|------|
| DSS | X | X |------|------|------|------|------|------|
| ADD | X | X | P |------|------|------|------|------|
| RM | C | C | C | P |------|------|------|------|
| PRIO | X | C | C | C | C |------|------|------|
| FAIL | X | X | C | X | X | X |------|------|
| FC | X | X | P | X | X | X | X |------|
| RST | X | X | X | X | X | X | O | O |
|------|------|------|------|------|------|------|------|------|
The only difference is with the 'P': another stack could send and
ADD_ADDR with other suboptions (DSS, RM_ADDR), and this should be
allowed.
A few points of attention:
- In theory, an MP_CAPABLE could be used with a RM_ADDR, but there is
no reason to add it with a SYN. Note that even with a 4th ACK, it
doesn't seem to be useful, except when IDs are known in advance via
another channel. Better not to break that.
- Now, combining both an MP_CAPABLE and an MP_JOIN will no longer
result to a reject of the two options, but only the second suboption
is ignored. That seems OK to do that for this unexpected error. At
least now all inconsistent combinations are handled the same way.
This could change later in next. This also means the explicit checks
for having both MPC + MPJ in subflow.c will now be unreachable.
That's fine, they will be removed in a follow-up patch.
- In case of conflicting combinations, the extra suboption(s) is/are
ignored: having such combinations either means the remote peer is
buggy, or is evil. The simplest action is then taken in this case:
stop processing the current suboption.
- In mp_opt->suboptions, there is also a bit reserved to the checksum,
which can be used in an MP_CAPABLE and a DSS. Each time a DSS option
can be used in parallel with another option, the checksum can be set,
so the verification is combined into a new OPTIONS_MPTCP_DSS macro.
- An MP_CAPABLE ACK can carry a Data-Level Length, and an optional
Checksum: they are the same as the ones found in a DSS, because a DSS
cannot be used in parallel to an MP_CAPABLE. Similarly, even if there
is room, a DSS cannot be used with an MP_JOIN. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix UVD decode image min size calculation
This needs to use pitch instead of width. Also reject pitch
over 4096 to avoid overflow.
(cherry picked from commit b41c8cb12e202b220353332ab87dc01a11f69304) |
| cpp-httplib is a C++ header-only HTTP/HTTPS library. In version 0.49.0, the chunked-response trailer output path writes trailer header names and values directly to the socket without validating them, allowing CRLF sequences in a trailer field to inject additional headers or split the HTTP response. Unlike every other header-writing path in the library, the trailer-writing code applies none of the field-name and field-value checks that reject carriage return and line feed, so an application that places attacker-influenced data into a chunked response trailer emits attacker-controlled CRLF onto the wire. This enables HTTP response splitting, letting an attacker forge response headers or inject a second response. This issue is fixed in version 0.50.0. |
| An heap overflow vulnerability in the WatchGuard Fireware OS iked process allows a remote unauthenticated attacker to execute arbitrary code by sending specially crafted network traffic. |
| gitoxide before 0.38.2 fails to validate carriage return characters in URL values passed to credential helpers. Attackers can supply URLs containing bare carriage returns to inject additional helper protocol fields and cause credential helpers to return credentials for attacker-specified hosts instead of the requested URL. |
| A heap-based buffer overflow vulnerability exists in openNDS before 11.0.0 that allows an unauthenticated attacker on the captive portal network to crash the openNDS daemon (denial of service) and potentially achieve remote code execution. This is in http_microhttpd.c. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer
rmi_f54_work() reads a diagnostics report from the device into
f54->report_data, sizing the transfer with rmi_f54_get_report_size():
report_size = rmi_f54_get_report_size(f54);
...
for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) {
int size = min(F54_REPORT_DATA_SIZE, report_size - i);
...
rmi_read_block(.., f54->report_data + i, size);
}
report_data is allocated once at probe from F54's own electrode counts
(array3_size(f54->num_tx_electrodes, f54->num_rx_electrodes, sizeof(u16))),
but rmi_f54_get_report_size() computes the size from
drv_data->num_*_electrodes when those are set, i.e. from the F55
function's electrode counts. Both counts come straight from device
queries (F54 and F55 each report up to 255 electrodes) and nothing
constrains the F55 counts to the F54 ones.
A malicious or malfunctioning RMI4 device that reports larger F55
electrode counts than its F54 counts makes report_size exceed the
allocation, so the read loop writes past report_data (and the V4L2
dequeue memcpy() then reads past it). On conforming hardware the F55
configured electrodes are a subset of the F54 physical electrodes, so
report_size never exceeds the buffer and well-behaved devices are
unaffected.
Record the allocation size and reject a report that does not fit,
mirroring the existing zero-size check. |
| An out-of-bounds read vulnerability in the WatchGuard Fireware OS iked process allows a remote unauthenticated attacker to create a Denial of Service (DoS) condition in VPN processing by sending specially crafted network traffic. |
| A heap-based buffer overflow vulnerability in Fireware OS's iked process allows an authenticated administrator to crash the IKE daemon (iked), resulting in a denial of service, by saving a specially crafted configuration. |
| Substance3D - Sampler is affected by a Stack-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In Zimbra Collaboration (ZCS) before 10.1.17, weak cryptographic key generation vulnerability exists in the OnlyOffice integration. The zimbraDocumentEditingJwtSecret is generated using an insecure random number generator, resulting in insufficient entropy. An attacker who obtains a JWT signed with the generated secret may be able to recover the JWT signing secret through offline brute-force, potentially enabling JWT forgery. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: account for fraggap on the paged allocation path
In __ip6_append_data(), when the paged-allocation branch is taken
(MSG_MORE / NETIF_F_SG / large fraglen), alloclen and pagedlen are
computed as
alloclen = fragheaderlen + transhdrlen;
pagedlen = datalen - transhdrlen;
datalen already includes fraggap (datalen = length + fraggap). When
fraggap is non-zero, this is not the first skb and transhdrlen is zero.
The fraggap bytes carried over from the previous skb are copied just past
the fragment headers in the new skb's linear area. The linear area is
therefore undersized by fraggap bytes while pagedlen is overstated by the
same amount, and the copy writes past skb->end into the trailing
skb_shared_info.
An unprivileged user can trigger this via a UDPv6 socket using
MSG_MORE together with MSG_SPLICE_PAGES.
The bad accounting was introduced by commit 773ba4fe9104 ("ipv6:
avoid partial copy for zc"). Before commit ce650a166335 ("udp6: Fix
__ip6_append_data()'s handling of MSG_SPLICE_PAGES"), the negative
copy value caused -EINVAL to be returned. That later commit allowed
MSG_SPLICE_PAGES to proceed in this case, making the corruption
triggerable.
The non-paged branch sets alloclen to fraglen, which already accounts
for fraggap because datalen does. Bring the paged branch in line by
adding fraggap to alloclen and subtracting it from pagedlen.
After this adjustment, copy no longer collapses to -fraggap on the
paged path, so remove the stale comment describing that old arithmetic.
Since a negative copy is no longer expected for a valid MSG_SPLICE_PAGES
case, remove the MSG_SPLICE_PAGES exception from the negative copy check. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - add response length checks
The driver processes response data from device buffers without verifying
that the device actually sent enough data. This can lead to
out-of-bounds reads or processing stale data.
Add checks for the expected response length before accessing the
buffers. |
| gitoxide gix-packetline versions before 0.21.5 contain a panic vulnerability in the TextRef implementation that occurs when processing side-band packet lines with empty payloads. A malicious Git server can send a crafted side-band packet to trigger an index out of bounds panic, aborting the client process during fetch operations without authentication. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: fix OOB read in decode_watchers() via missing bounds check
ceph_start_decoding() validates that struct_len bytes remain in the
buffer after the encoding header, but accepts struct_len=0 as valid:
ceph_decode_need(p, end, 0, bad) always passes. When a malicious or
compromised OSD sends an obj_list_watch_response_t reply with
struct_len=0, ceph_start_decoding() returns success with p == end,
leaving zero bytes guaranteed for subsequent reads.
The immediately following ceph_decode_32(p) in decode_watchers() has
no preceding bounds check. With p == end this is a 4-byte read past
the validated buffer boundary. The garbage value is then passed
directly to kzalloc_objs() as the watcher count.
The sibling function decode_watcher() already uses the safe variants
(ceph_decode_copy_safe, ceph_decode_64_safe, ceph_decode_skip_32)
after its own ceph_start_decoding() call. decode_watchers() is the
only site that uses the bare variant, confirming an oversight.
Fix by replacing ceph_decode_32(p) with ceph_decode_32_safe(p, end,
*num_watchers, bad), consistent with the established pattern.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment (e.g. cloud) can trigger this against any kernel client
that calls CEPH_OSD_OP_LIST_WATCHERS, without any further privileges
beyond OSD session establishment.
[ idryomov: trim changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Avoid using invalid osd indices from primary_temp
A corrupted osdmap received from a Ceph monitor or OSD may contain osd
indices in its pg_temp, primary_temp, pg_upmap, and pg_upmap_items parts
that don't exist, i.e., that are greater than max_osd or smaller than
CEPH_HOMELESS_OSD (-1). These indices are used to create the up and
acting set in ceph_pg_to_up_acting_osds(), called from calc_target().
While most of these osd indices are checked, the one from primary_temp
is not. Subsequently, this may lead to calc_target() returning this
(potentially invalid) index as target osd for a (linger) request.
Because the osd_state, osd_weight, and osd_addr arrays only contain
max_osd entries (with indices 0 to max_osd -1), this leads to
out-of-bounds accesses when trying to read values from these arrays.
This patch fixes the issue by adding a check to get_temp_osds(), so that
only valid osd indices from primary_temp are used, and it falls back to
using the primary from pg_temp or the up set if it is invalid.
[ idryomov: changelog ] |
