Export limit exceeded: 409447 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409447 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31747 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: comedi: me4000: Fix potential overrun of firmware buffer `me4000_xilinx_download()` loads the firmware that was requested by `request_firmware()`. It is possible for it to overrun the source buffer because it blindly trusts the file format. It reads a data stream length from the first 4 bytes into variable `file_length` and reads the data stream contents of length `file_length` from offset 16 onwards. Add a test to ensure that the supplied firmware is long enough to contain the header and the data stream. On failure, log an error and return `-EINVAL`. Note: The firmware loading was totally broken before commit ac584af59945 ("staging: comedi: me4000: fix firmware downloading"), but that is the most sensible target for this fix. | ||||
| CVE-2026-31444 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free and NULL deref in smb_grant_oplock() smb_grant_oplock() has two issues in the oplock publication sequence: 1) opinfo is linked into ci->m_op_list (via opinfo_add) before add_lease_global_list() is called. If add_lease_global_list() fails (kmalloc returns NULL), the error path frees the opinfo via __free_opinfo() while it is still linked in ci->m_op_list. Concurrent m_op_list readers (opinfo_get_list, or direct iteration in smb_break_all_levII_oplock) dereference the freed node. 2) opinfo->o_fp is assigned after add_lease_global_list() publishes the opinfo on the global lease list. A concurrent find_same_lease_key() can walk the lease list and dereference opinfo->o_fp->f_ci while o_fp is still NULL. Fix by restructuring the publication sequence to eliminate post-publish failure: - Set opinfo->o_fp before any list publication (fixes NULL deref). - Preallocate lease_table via alloc_lease_table() before opinfo_add() so add_lease_global_list() becomes infallible after publication. - Keep the original m_op_list publication order (opinfo_add before lease list) so concurrent opens via same_client_has_lease() and opinfo_get_list() still see the in-flight grant. - Use opinfo_put() instead of __free_opinfo() on err_out so that the RCU-deferred free path is used. This also requires splitting add_lease_global_list() to take a preallocated lease_table and changing its return type from int to void, since it can no longer fail. | ||||
| CVE-2026-31748 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: comedi: me_daq: Fix potential overrun of firmware buffer `me2600_xilinx_download()` loads the firmware that was requested by `request_firmware()`. It is possible for it to overrun the source buffer because it blindly trusts the file format. It reads a data stream length from the first 4 bytes into variable `file_length` and reads the data stream contents of length `file_length` from offset 16 onwards. Although it checks that the supplied firmware is at least 16 bytes long, it does not check that it is long enough to contain the data stream. Add a test to ensure that the supplied firmware is long enough to contain the header and the data stream. On failure, log an error and return `-EINVAL`. | ||||
| CVE-2026-31445 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: avoid use of half-online-committed context One major usage of damon_call() is online DAMON parameters update. It is done by calling damon_commit_ctx() inside the damon_call() callback function. damon_commit_ctx() can fail for two reasons: 1) invalid parameters and 2) internal memory allocation failures. In case of failures, the damon_ctx that attempted to be updated (commit destination) can be partially updated (or, corrupted from a perspective), and therefore shouldn't be used anymore. The function only ensures the damon_ctx object can safely deallocated using damon_destroy_ctx(). The API callers are, however, calling damon_commit_ctx() only after asserting the parameters are valid, to avoid damon_commit_ctx() fails due to invalid input parameters. But it can still theoretically fail if the internal memory allocation fails. In the case, DAMON may run with the partially updated damon_ctx. This can result in unexpected behaviors including even NULL pointer dereference in case of damos_commit_dests() failure [1]. Such allocation failure is arguably too small to fail, so the real world impact would be rare. But, given the bad consequence, this needs to be fixed. Avoid such partially-committed (maybe-corrupted) damon_ctx use by saving the damon_commit_ctx() failure on the damon_ctx object. For this, introduce damon_ctx->maybe_corrupted field. damon_commit_ctx() sets it when it is failed. kdamond_call() checks if the field is set after each damon_call_control->fn() is executed. If it is set, ignore remaining callback requests and return. All kdamond_call() callers including kdamond_fn() also check the maybe_corrupted field right after kdamond_call() invocations. If the field is set, break the kdamond_fn() main loop so that DAMON sill doesn't use the context that might be corrupted. [sj@kernel.org: let kdamond_call() with cancel regardless of maybe_corrupted] | ||||
| CVE-2026-31749 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: ni_atmio16d: Fix invalid clean-up after failed attach If the driver's COMEDI "attach" handler function (`atmio16d_attach()`) returns an error, the COMEDI core will call the driver's "detach" handler function (`atmio16d_detach()`) to clean up. This calls `reset_atmio16d()` unconditionally, but depending on where the error occurred in the attach handler, the device may not have been sufficiently initialized to call `reset_atmio16d()`. It uses `dev->iobase` as the I/O port base address and `dev->private` as the pointer to the COMEDI device's private data structure. `dev->iobase` may still be set to its initial value of 0, which would result in undesired writes to low I/O port addresses. `dev->private` may still be `NULL`, which would result in null pointer dereferences. Fix `atmio16d_detach()` by checking that `dev->private` is valid (non-null) before calling `reset_atmio16d()`. This implies that `dev->iobase` was set correctly since that is set up before `dev->private`. | ||||
| CVE-2026-31750 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: runflags cannot determine whether to reclaim chanlist syzbot reported a memory leak [1], because commit 4e1da516debb ("comedi: Add reference counting for Comedi command handling") did not consider the exceptional exit case in do_cmd_ioctl() where runflags is not set. This caused chanlist not to be properly freed by do_become_nonbusy(), as it only frees chanlist when runflags is correctly set. Added a check in do_become_nonbusy() for the case where runflags is not set, to properly free the chanlist memory. [1] BUG: memory leak backtrace (crc 844a0efa): __comedi_get_user_chanlist drivers/comedi/comedi_fops.c:1815 [inline] do_cmd_ioctl.part.0+0x112/0x350 drivers/comedi/comedi_fops.c:1890 do_cmd_ioctl drivers/comedi/comedi_fops.c:1858 [inline] | ||||
| CVE-2026-31751 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: dt2815: add hardware detection to prevent crash The dt2815 driver crashes when attached to I/O ports without actual hardware present. This occurs because syzkaller or users can attach the driver to arbitrary I/O addresses via COMEDI_DEVCONFIG ioctl. When no hardware exists at the specified port, inb() operations return 0xff (floating bus), but outb() operations can trigger page faults due to undefined behavior, especially under race conditions: BUG: unable to handle page fault for address: 000000007fffff90 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page RIP: 0010:dt2815_attach+0x6e0/0x1110 Add hardware detection by reading the status register before attempting any write operations. If the read returns 0xff, assume no hardware is present and fail the attach with -ENODEV. This prevents crashes from outb() operations on non-existent hardware. | ||||
| CVE-2026-43049 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure Presently, if the force feedback initialisation fails when probing the Logitech G920 Driving Force Racing Wheel for Xbox One, an error number will be returned and propagated before the userspace infrastructure (sysfs and /dev/input) has been torn down. If userspace ignores the errors and continues to use its references to these dangling entities, a UAF will promptly follow. We have 2 options; continue to return the error, but ensure that all of the infrastructure is torn down accordingly or continue to treat this condition as a warning by emitting the message but returning success. It is thought that the original author's intention was to emit the warning but keep the device functional, less the force feedback feature, so let's go with that. | ||||
| CVE-2026-36387 | 1 Codeastro | 1 Membership Management System | 2026-05-07 | 6.5 Medium |
| A Remote Code Execution vulnerability was found in CODEASTRO Membership Management System v1.0 in /add_members.php. This vulnerability affects the file upload functionality, where improper file sanitization allows attackers to inject malicious files which leads RCE. | ||||
| CVE-2026-31738 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: validate ND option lengths in vxlan_na_create vxlan_na_create() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address. | ||||
| CVE-2026-29969 | 2 Cmoncrook, Workflowfirst | 2 Staffwiki, Staffwiki | 2026-05-07 | 6.1 Medium |
| A cross-site scripting (XSS) vulnerability in the wff_cols_pref.css.aspx endpoint of staffwiki v7.0.1.19219 allows attackers to execute arbitrary Javascript in the context of the user's browser via a crafted HTTP request. | ||||
| CVE-2025-65857 | 1 Xiongmaitech | 2 Xm530v200 X6-weq 8m, Xm530v200 X6-weq 8m Firmware | 2026-05-07 | 7.5 High |
| An issue was discovered in Xiongmai XM530 IP cameras on firmware V5.00.R02.000807D8.10010.346624.S.ONVIF 21.06. The GetStreamUri exposes RTSP URIs containing hardcoded credentials enabling direct unauthorized video stream access. | ||||
| CVE-2025-70025 | 2 Benkeen, Generatedata | 2 Generatedata, Generatedata | 2026-05-07 | 6.1 Medium |
| An issue pertaining to CWE-79: Improper Neutralization of Input During Web Page Generation was discovered in benkeen generatedata 4.0.14. | ||||
| CVE-2026-2741 | 1 Vaadin | 2 Flow, Vaadin | 2026-05-07 | 6.8 Medium |
| Specially crafted ZIP archives can escape the intended extraction directory during Node.js download and extraction in Vaadin 14.2.0 through 14.14.0, 15.0.0 through 23.6.6, 24.0.0 through 24.9.8, and 25.0.0 through 25.0.2. Vaadin’s build process can automatically download and extract Node.js if it is not installed locally. If an attacker can intercept or control this download via DNS hijacking, a MITM attack, a compromised mirror, or a supply chain attack, they can serve a malicious archive containing path traversal sequences that write files outside the intended extraction directory. Users of affected versions should use a globally preinstalled Node.js version compatible with their Vaadin version, or upgrade as follows: 14.2.0-14.14.0 to 14.14.1, 15.0.0-23.6.6 to 23.6.7, 24.0.0-24.9.8 to 24.9.9, and 25.0.0-25.0.2 to 25.0.3 or newer. Please note that Vaadin versions 10-13 and 15-22 are no longer supported and you should update either to the latest 14, 23, 24, 25 version. | ||||
| CVE-2026-2742 | 1 Vaadin | 2 Flow, Vaadin | 2026-05-07 | 5.3 Medium |
| An authentication bypass vulnerability exists in Vaadin 14.0.0 through 14.14.0, 23.0.0 through 23.6.6, 24.0.0 through 24.9.7 and 25.0.0 through 25.0.1, applications using Spring Security due to inconsistent path pattern matching of reserved framework paths. Accessing the /VAADIN endpoint without a trailing slash bypasses security filters, and allowing unauthenticated users to trigger framework initialization and create sessions without proper authorization. Users of affected versions using Spring Security should upgrade as follows: 14.0.0-14.14.0 upgrade to 14.14.1, 23.0.0-23.6.6 to 23.6.7, 24.0.0 - 24.9.7 to 24.9.8, and 25.0.0-25.0.1 upgrade to 25.0.2 or newer. Please note that Vaadin versions 10-13 and 15-22 are no longer supported and you should update either to the latest 14, 23, 24, 25 version. | ||||
| CVE-2026-31460 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: check if ext_caps is valid in BL setup LVDS connectors don't have extended backlight caps so check if the pointer is valid before accessing it. (cherry picked from commit 3f797396d7f4eb9bb6eded184bbc6f033628a6f6) | ||||
| CVE-2026-30964 | 2 Spomky-labs, Web-auth | 6 Webauthn-lib, Webauthn-symfony-bundle, Webauthn Framwork and 3 more | 2026-05-07 | 5.4 Medium |
| web-auth/webauthn-lib is an open source set of PHP libraries and a Symfony bundle to allow developers to integrate that authentication mechanism into their web applications. Prior to 5.2.4, when allowed_origins is configured, CheckAllowedOrigins reduces URL-like values to their host component and accepts on host match alone. This makes exact origin policies impossible to express: scheme and port differences are silently ignored. This vulnerability is fixed in 5.2.4. | ||||
| CVE-2026-31461 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix drm_edid leak in amdgpu_dm [WHAT] When a sink is connected, aconnector->drm_edid was overwritten without freeing the previous allocation, causing a memory leak on resume. [HOW] Free the previous drm_edid before updating it. (cherry picked from commit 52024a94e7111366141cfc5d888b2ef011f879e5) | ||||
| CVE-2026-31462 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: prevent immediate PASID reuse case PASID resue could cause interrupt issue when process immediately runs into hw state left by previous process exited with the same PASID, it's possible that page faults are still pending in the IH ring buffer when the process exits and frees up its PASID. To prevent the case, it uses idr cyclic allocator same as kernel pid's. (cherry picked from commit 8f1de51f49be692de137c8525106e0fce2d1912d) | ||||
| CVE-2026-3911 | 1 Redhat | 2 Build Keycloak, Build Of Keycloak | 2026-05-07 | 2.7 Low |
| A flaw was found in Keycloak. An authenticated user with the view-users role could exploit a vulnerability in the UserResource component. By accessing a specific administrative endpoint, this user could improperly retrieve user attributes that were configured to be hidden. This unauthorized information disclosure could expose sensitive user data. | ||||