| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: reject non zerocopy devmem tx
Devmem tcp tx doesn't work without zero-copy, however it's not currently
enforced if NETIF_F_SG isn't present. In this case, tcp_sendmsg_locked()
will try the copy path and try to copy data from an iovec which consists
of offsets into the dma-buf and would normally fail. Moreover,
d9c56501c72fd ("net: tcp: block mixing readable and unreadable frags")
relies on that and assumes that the devmem binding is present IFF we're
using the zero-copy path, which can be used to mix net-iov and pages in
a single skb, and break invariants. Let's reject devmem tx without
zero-copy.
Note, the parameter check the patch is modifying is too loose, we can
create an io_uring request with dmabuf_id and all ZC flags, but which
won't have the binding. We replace it with stricter validation. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: atm: usbatm: fix invalid ci_range initialization
syzbot reported a shift-out-of-bounds in __vcc_connect():
UBSAN: shift-out-of-bounds in net/atm/common.c:382:32
shift exponent -1 is negative
CPU: 0 UID: 0 PID: 5987 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/05/2026
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
ubsan_epilogue+0xa/0x30 lib/ubsan.c:233
__ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494
__vcc_connect+0x14b4/0x19c0 net/atm/common.c:382
vcc_connect+0x328/0x8f0 net/atm/common.c:498
pvc_bind+0x272/0x380 net/atm/pvc.c:52
__sys_bind+0x2e3/0x410 net/socket.c:1976
__x64_sys_bind+0x7a/0x90 net/socket.c:1979
...
ATM device ci_range fields (vpi_bits and vci_bits) represent the
number of bits supported for VPI and VCI addressing on the device.
net/atm/common.c directly uses these fields as bit shift counts:
vpi >> dev->ci_range.vpi_bits
vci >> dev->ci_range.vci_bits
1 << vcc->dev->ci_range.vpi_bits
1 << vcc->dev->ci_range.vci_bits
usbatm_atm_init() sets ci_range.vpi_bits and ci_range.vci_bits to
ATM_CI_MAX (-1), which is defined in <uapi/linux/atmdev.h> as a
sentinel value for userspace ATM_SETCIRANGE requests, not a valid bit
count. Shifting by -1 is undefined behavior and triggers UBSAN
warnings.
ATM UNI cell headers allow up to 8 bits for VPI (0..255) and 16 bits
for VCI (0..65535). Initialize vpi_bits to 8 and vci_bits to 16, as
done by solos-pci. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: control: Don't add invalid kcontrols to LED layer
The kcontrol LED state layer tries to track the all associated
kcontrol elements with naive assumptions that they are readable.
But one can create a write-only element that has no get callback (even
a user element can do it), and this may lead to a NULL dereference at
the call chain of snd_ctl_led_notify(), as found by syzkaller.
For avoiding the Oops, add a sanity check of the kcontrol's info and
get callbacks, and just skip the invalid kcontrols before assigning
the kctl to the LED layer. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: move hardware offload step after building the chain blob
Allocate the chain blob before the ruleset offload to reduce chances of
entering an inconsistent state where the offloaded ruleset in the nic
and the software ruleset differ. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: dapm: Fix off-by-one check on the second enum channel
The snd_soc_dapm_put_enum_double() rejects item[0] once it reaches
e->items, but it lets item[1] be equal to it. Both go on to
snd_soc_enum_item_to_val(), which indexes e->values with no bound of
its own, so an enum with a value table reads one element past the end.
The indexing arrived with the MUX consolidation, which relaxed the
item[1] check in the same hunk. The value MUX handler it deleted used
>= there, and the snd_soc_put_enum_double() in soc-ops.c still does.
Only adav80x pairs a value table with two shifts, and its second
channel looks accidental, but the control does report two values.
Writing three into it reads off the end of adav80x_mux_values. The
core catches that only under CONFIG_SND_CTL_INPUT_VALIDATION, which
defaults off. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: st33zp24: Return zero on status read failure
st33zp24_status() ignores the result of the transport read and returns
data even when no byte was received. The I2C transport, for example,
skips i2c_master_recv() when the register-select write is short or fails,
leaving data uninitialized. The resulting stack value can be interpreted
as TPM_STS flags and let status checks complete spuriously.
The status callback cannot propagate a transport error. Return zero
unless recv() reports exactly one byte. With no status bits set, callers
retry or take their existing timeout or error path instead of acting on
an invalid status value.
This issue was found by a static analysis checker and confirmed by manual
source review. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_teql: restore skb->dev on the slave failure path
teql_master_xmit() sets skb->dev = slave before calling the slave's
ndo_start_xmit(), but never restores it when that transmit fails. The
skb then walks on to the next slave still pointing at the previous one.
If a later slave has no resolved neighbour, teql_resolve() hands the skb
to neigh_event_send(), which queues it on that neighbour's arp_queue
with the stale skb->dev. skb->dev holds no reference, so deleting the
previous slave frees the net_device while the skb is still queued.
Whatever runs next on that skb - arp_error_report() on timeout, or
neigh_direct_output() -> dev_queue_xmit() once the neighbour resolves -
causes a UAF like the one below:
BUG: KASAN: slab-use-after-free in __icmp_send (net/ipv4/icmp.c:914 (discriminator 2))
Read of size 4 at addr ffff888106e100b0 by task flood_packet/527
CPU: 0 UID: 0 PID: 527 Comm: flood_packet Not tainted 7.2.0-rc6-g594d90519502 #1 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
? __pfx__raw_spin_lock_irqsave (./include/asm-generic/qrwlock.h:122 (discriminator 4))
? __icmp_send (net/ipv4/icmp.c:914 (discriminator 2))
kasan_report (mm/kasan/report.c:595)
? __icmp_send (net/ipv4/icmp.c:914 (discriminator 2))
__icmp_send (net/ipv4/icmp.c:914 (discriminator 2))
[...]
ipv4_link_failure (net/ipv4/route.c:1251 net/ipv4/route.c:1258)
? __pfx_ipv4_link_failure (./include/linux/skbuff.h:4327)
? _raw_write_lock (./include/linux/instrumented.h:55 ./include/linux/atomic/atomic-instrumented.h:1301 ./include/asm-generic/qrwlock.h:98 ./include/linux/rwlock_api_smp.h:230 kernel/locking/spinlock.c:304)
? __pfx__raw_write_lock (kernel/locking/spinlock.c:175)
arp_error_report (./include/net/dst.h:438 net/ipv4/arp.c:296)
neigh_invalidate (net/core/neighbour.c:1077)
neigh_timer_handler (net/core/neighbour.c:1169)
[...]
Allocated by task 505:
kasan_save_stack (mm/kasan/common.c:57)
kasan_save_track (mm/kasan/common.c:78)
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
__kvmalloc_node_noprof (./include/linux/kasan.h:263 mm/slub.c:5334 mm/slub.c:6905)
alloc_netdev_mqs (net/core/dev.c:12055 (discriminator 2))
rtnl_create_link (net/core/rtnetlink.c:3721)
rtnl_newlink (net/core/rtnetlink.c:3903 net/core/rtnetlink.c:4044 net/core/rtnetlink.c:4159)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
[...]
Freed by task 536:
kasan_save_stack (mm/kasan/common.c:57)
kasan_save_track (mm/kasan/common.c:78)
kasan_save_free_info (mm/kasan/generic.c:584)
__kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285)
kfree (./include/linux/kasan.h:235 mm/slub.c:2677 mm/slub.c:6377 mm/slub.c:6692)
device_release (drivers/base/core.c:2636)
kobject_put (lib/kobject.c:689 lib/kobject.c:720 ./include/linux/kref.h:65 lib/kobject.c:737)
netdev_run_todo (net/core/dev.c:11756)
rtnl_dellink (net/core/rtnetlink.c:157 ./include/linux/rtnetlink.h:135 net/core/rtnetlink.c:3651)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
[...]
Fix this by restoring skb->dev to the master at the end of each slave's
iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: fix NULL deref of af_xdp_zc_qidx on rep setup
af_xdp_zc_qidx tracks receive queues using AF_XDP zero-copy and is
allocated during PF/VF probe. Representors and other non-AF_XDP paths
leave the pointer NULL, but several call sites used test_bit() on it
unconditionally.
Switching to devlink eswitch mode creates representors and runs
otx2_init_hw_resources(), which reaches otx2_pool_aq_init() and oopses
when dereferencing the NULL bitmap. Add NULL checks before every
af_xdp_zc_qidx test_bit() use in the RSS, ethtool, XSK, and pool init
paths. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-vf: fix workqueue and netdev race in probe/remove
Initialize the VF workqueue before register_netdev() so ndo_set_rx_mode
does not queue work on a NULL workqueue. Unregister the netdev before
destroying the workqueue, and add proper probe error cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix call to hardware monitoring event handler
The first parameter of hwmon_notify_event() is supposed to be the hardware
monitoring device. The bnxt driver calls it with the platform device as
first parameter instead. This API break results in undefined behavior and
may result in a crash.
Pass the hardware monitoring device as parameter instead to fix the
problem. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate usa_ofs before preserving the update sequence number
When ntfs_mft_record_alloc() reuses a free mft record it reads the old
update sequence number straight from the on-disk record:
usn = *(__le16 *)((u8 *)m + le16_to_cpu(m->usa_ofs));
Here m points into the raw $MFT page-cache folio, which still holds
unvalidated, MST-protected bytes: the folio is read by a plain
iomap_read_folio() and neither post_read_mst_fixup() nor
ntfs_mft_record_check() has run on it (both work on private copies).
m->usa_ofs is therefore an untrusted u16, and a corrupted record can put
it past the end of the record so the two-byte read lands outside the
folio. Reading such a record while creating a file gives, under KASAN:
BUG: KASAN: use-after-free in ntfs_mft_record_alloc+...
Read of size 2 at addr ...
ntfs_mft_record_alloc -> __ntfs_create -> ntfs_create -> path_openat
Only preserve the old update sequence number when usa_ofs is even and in
range, mirroring the check ntfs_mft_record_check() already applies;
otherwise leave usn zero, which the existing restore below skips. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: smbdirect: free completion queues with ib_free_cq()
smbdirect_connection_destroy_qp() creates the send and receive completion
queues with ib_alloc_cq_any(), which for IB_POLL_WORKQUEUE arms an
internal completion handler that runs ib_cq_poll_work() on a workqueue.
Tearing those CQs down with ib_destroy_cq() frees them without first
cancelling that poll work.
If the provider posts a completion late -- for example Soft-RoCE (rxe)
posting an RNR error from rxe_receiver() after rdma_destroy_qp() -- the
handler re-queues ib_cq_poll_work() on the already-freed CQ, and a
follow-on access faults in rxe_req_notify_cq().
Use ib_free_cq(), which cancel_work_sync()es the poll work before freeing
the CQ, so no completion handler can run against a freed queue.
[ 1236.599526] ==================================================================
[ 1236.602142] BUG: KASAN: slab-use-after-free in ib_cq_poll_work+0xd0/0x1a0
[ 1236.605524] Read of size 8 at addr ffff888111865800 by task kworker/4:1H/82
[ 1236.609017]
[ 1236.609270] CPU: 4 UID: 0 PID: 82 Comm: kworker/4:1H Not tainted 7.2.0-rc3-next-20260717-virtme #110 PREEMPT(lazy)
[ 1236.609287] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 1236.609498] Workqueue: ib-comp-wq ib_cq_poll_work
[ 1236.609525] Call Trace:
[ 1236.609536] <TASK>
[ 1236.609545] __dump_stack+0x21/0x60
[ 1236.609562] dump_stack_lvl+0xc2/0x100
[ 1236.609573] print_address_description+0x77/0x200
[ 1236.609587] ? ib_cq_poll_work+0xd0/0x1a0
[ 1236.609597] print_report+0x58/0x70
[ 1236.609607] kasan_report+0x117/0x150
[ 1236.609623] ? ib_cq_poll_work+0xd0/0x1a0
[ 1236.609636] ? process_scheduled_works+0x954/0x1600
[ 1236.609650] ib_cq_poll_work+0xd0/0x1a0
[ 1236.609662] ? process_scheduled_works+0x954/0x1600
[ 1236.609674] process_scheduled_works+0xc22/0x1600
[ 1236.609698] ? __pfx_process_scheduled_works+0x10/0x10
[ 1236.609713] ? __pfx_assign_work+0x10/0x10
[ 1236.609726] ? lock_is_held_type+0x7b/0x110
[ 1236.609741] worker_thread+0x975/0xee0
[ 1236.609757] ? __pfx_do_raw_spin_lock+0x10/0x10
[ 1236.609775] ? __kthread_parkme+0x21e/0x260
[ 1236.609789] kthread+0x3a6/0x490
[ 1236.609800] ? __pfx_worker_thread+0x10/0x10
[ 1236.609809] ? __pfx_kthread+0x10/0x10
[ 1236.609820] ret_from_fork+0x55a/0xa20
[ 1236.609835] ? __pfx_ret_from_fork+0x10/0x10
[ 1236.609850] ? __pfx_kthread+0x10/0x10
[ 1236.609861] ret_from_fork_asm+0x1a/0x30
[ 1236.609880] </TASK>
[ 1236.609886]
[ 1236.661292] Allocated by task 5076:
[ 1236.662640] kasan_save_track+0x3e/0x80
[ 1236.663842] __kasan_kmalloc+0x72/0x90
[ 1236.664763] __kmalloc_noprof+0x2b0/0x5d0
[ 1236.665356] __ib_alloc_cq+0x284/0x1000
[ 1236.666573] __ib_alloc_cq_any+0x23e/0x340
[ 1236.668654] smbdirect_connection_create_qp+0x6f7/0x1070
[ 1236.669757] smbdirect_accept_connect_request+0x500/0x1ca0
[ 1236.672625] smbdirect_listen_rdma_event_handler+0x1655/0x1c50
[ 1236.673930] cma_listen_handler+0x1bf/0x260
[ 1236.674923] cma_cm_event_handler+0x128/0x380
[ 1236.676926] cma_ib_req_handler+0x2d3d/0x4de0
[ 1236.678368] cm_process_work+0xb0/0x530
[ 1236.680454] cm_queue_work_unlock+0xb1/0x230
[ 1236.681673] cm_work_handler+0x969f/0xdca0
[ 1236.682704] process_scheduled_works+0xc22/0x1600
[ 1236.683447] worker_thread+0x975/0xee0
[ 1236.685901] kthread+0x3a6/0x490
[ 1236.688164] ret_from_fork+0x55a/0xa20
[ 1236.689522] ret_from_fork_asm+0x1a/0x30
[ 1236.690073]
[ 1236.690378] Freed by task 5137:
[ 1236.692242] kasan_save_track+0x3e/0x80
[ 1236.694272] kasan_save_free_info+0x40/0x50
[ 1236.695514] __kasan_slab_free+0x3a/0x60
[ 1236.696773] kfree+0x14e/0x4e0
[ 1236.697216] ib_destroy_cq_user+0x18d/0x250
[ 1236.699817] smbdirect_connection_destroy_qp+0xf2/0x280
[ 1236.702115] smbdirect_socket_destroy_sync+0x1607/0x2720
[ 1236.704062] smbdirect_socket_release+0x140/0x280
[ 1236.705286] smb_direct_free_transpor
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: move custom expectation support to helper
Originally, the ct expectation support called nf_ct_helper_ext_add() for
confirmed conntracks, which is invalid, triggering a splat. This was
fixed by commit 1710eb913bdc ("netfilter: nft_ct: skip expectations for
confirmed conntrack") which restricted it to unconfirmed conntracks.
However, early insertion of expectations into the expectations list when
the conntrack is unconfirmed leads to stale entries pointing to the
wrong hlist_head through .pprev due to ct extension reallocation.
Commit 7c9664351980 ("netfilter: move nat hlist_head to nf_conn") moved
the nat hlist_head to nf_conn for this reason:
1. ...
2. When reallocation of extension area occurs we need to fixup the
bysource hash head via hlist_replace_rcu.
I'd rather not increase the size of the struct nf_conn for this feature
has very limited scope: only one expectation can be created at a time
given expect_clash() will make nf_ct_expect_related() reports EBUSY.
For this reason, relax nf_ct_expect_related() not to drop packets in
case expectation creation fails, therefore, expectation creation becomes
best effort.
To address this issue, add an internal ct helper and attach it to the
conntrack entry to streamline the custom ct expectation support with
existing ct helpers.
Expose a new nf_conntrack_helper_release() function to release the
internal helper that is allocated and attached to the conntrack entry to
create the custom expectations. The nft_ct module removal always waits
for rcu grace period, then the NULL helper callback is observed after
this.
This patch also restricts the creation of expectations to different
helpers other than this custom helper that is created for this type of
expectations. |
| A weakness has been identified in Kamailio up to 5.8.8/6.0.7/6.1.4/6.2.0-dev1. The impacted element is the function shm_malloc of the file src/modules/cdp/receiver.c of the component CDP Diameter Receiver. Executing a manipulation can lead to heap-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks. Upgrading to version 6.0.8 is sufficient to resolve this issue. This patch is called 38711a3e788de0130d48cb485578c482b57d9351/4f62235b6f477b649c5cc18b0c81b4e26c949b98/4f62235b6f477b649c5cc18b0c81b4e26c949b98. You should upgrade the affected component. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: clear vdev->msi_perm after freeing it on init failure
vfio_msi_cap_len() lazily allocates the per-device MSI permission table:
vdev->msi_perm = kmalloc_obj(struct perm_bits, GFP_KERNEL_ACCOUNT);
if (!vdev->msi_perm)
return -ENOMEM;
ret = init_pci_cap_msi_perm(vdev->msi_perm, len, flags);
if (ret) {
kfree(vdev->msi_perm);
return ret; /* vdev->msi_perm left dangling */
}
When init_pci_cap_msi_perm() -> alloc_perm_bits() fails with -ENOMEM, the
error path frees vdev->msi_perm but leaves the freed pointer stored in
it. vdev->msi_perm is not re-zeroed later because struct
vfio_pci_core_device is per-device and persists across open/close cycles,
and the vfio_config_init() error path returns without calling
vfio_config_free(). So the dangling pointer outlives the failed open.
That leads to two use-after-frees on the same device:
1. Reuse. The next vfio_config_init() sees the stale pointer at
"if (vdev->msi_perm) return len;" and reuses the freed object. MSI
config accesses in vfio_pci_config_rw_single() then dereference and
call the freed perm->readfn / perm->writefn function pointers.
2. Double free. A later vfio_config_free() runs free_perm_bits() and
kfree() on the already-freed object.
Fix it by NULLing vdev->msi_perm after the kfree(), matching the
NULL-after-free discipline already used in free_perm_bits() and
vfio_config_free().
BUG: KASAN: slab-use-after-free in vfio_pci_config_rw_single (drivers/vfio/pci/vfio_pci_config.c:1961)
Read of size 8 at addr ffff88800fcc88d0 by task exploit/143
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
vfio_pci_config_rw_single (drivers/vfio/pci/vfio_pci_config.c:1961)
vfio_pci_config_rw (drivers/vfio/pci/vfio_pci_config.c:1986)
vfio_pci_rw (drivers/vfio/pci/vfio_pci_core.c:1599)
vfs_read (fs/read_write.c:572)
__x64_sys_pread64 (fs/read_write.c:764)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
...
Followed on device close by a double free of the same object:
Oops: general protection fault, probably for non-canonical address
0x1f63e0e8000008: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:kfree (mm/slub.c:6711)
Call Trace:
vfio_config_free (drivers/vfio/pci/vfio_pci_config.c:1861)
vfio_pci_core_disable (drivers/vfio/pci/vfio_pci_core.c:685)
vfio_pci_core_close_device (drivers/vfio/pci/vfio_pci_core.c:777)
vfio_df_close (drivers/vfio/vfio_main.c:602)
vfio_device_fops_release (drivers/vfio/vfio_main.c:648)
__fput (fs/file_table.c:512)
__x64_sys_close (fs/open.c:1496)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
...
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: fix out-of-bounds page array access on empty zisofs block
zisofs_uncompress_block()'s empty-block fast path returns
pcount << PAGE_SHIFT, ignoring the incoming poffset, unlike the
decompression path which returns bytes produced relative to poffset.
zisofs_fill_pages() uses that return to advance its page cursor, so when
the zisofs block size is below PAGE_SIZE and a sub-page block leaves
poffset partway into a page, a following empty block over-counts and
advances pages[] one element past its end, after which
"if (poffset && *pages)" reads pages[1] out of bounds. rock.c only
rejects a block-size shift > 17, so a crafted "ZF" Rock Ridge record can
set it below PAGE_SHIFT; the bug is reached by an ordinary read() of a
compressed file on such a mounted ISO9660 image.
Return the byte count relative to poffset and zero only
[poffset, PAGE_SIZE) of the first page, matching the decompression path.
The page-aligned case (poffset == 0) is unaffected.
BUG: KASAN: slab-out-of-bounds in zisofs_read_folio (fs/isofs/compress.c:290)
Read of size 8 at addr ffff88800f5eac48 by task exploit/142
zisofs_read_folio (fs/isofs/compress.c:290)
read_pages (mm/readahead.c:184)
...
filemap_read (mm/filemap.c:2814)
vfs_read (fs/read_write.c:574)
__x64_sys_pread64 (fs/read_write.c:769)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
The buggy address is located 0 bytes to the right of the
allocated 8-byte region in the kmalloc-8 cache |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: validate ef->size covers the record's name and value
When an EA record has a non-zero ef->size, ntfs_read_ea() only checks
that the record fits in the remaining buffer (ea_size > bytes), not that
ef->size is large enough to hold the record's own name_len + 1 + elength.
A crafted image can pass validation with, e.g., ef->size = 24 but
elength = 0xffff. ntfs_get_ea() then trusts elength and copies it out of
the undersized record, reading past the kmalloc(info->size) allocation
and leaking heap memory to userspace via getxattr():
BUG: KASAN: slab-out-of-bounds in ntfs_get_ea (fs/ntfs3/xattr.c:302)
Read of size 65535 at addr ffff888100794550 by task exploit
__asan_memcpy (mm/kasan/shadow.c:105)
ntfs_get_ea (fs/ntfs3/xattr.c:302)
ntfs_getxattr (fs/ntfs3/xattr.c:848)
__vfs_getxattr (fs/xattr.c:441)
vfs_getxattr (fs/xattr.c:474)
do_getxattr (fs/xattr.c:800)
path_getxattrat (fs/xattr.c:868)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
The buggy address is located 80 bytes inside of
allocated 84-byte region in cache kmalloc-96
Compute the size the record needs and require ef->size to cover it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qualcomm: rmnet: restore skb->dev on deaggregated frames
rmnet_map_deaggregate() allocates each sub-frame with alloc_skb() and
leaves skb->dev NULL. __rmnet_map_ingress_handler() assigns
skb->dev = ep->egress_dev only on the data path, but a MAP command frame
is dispatched to rmnet_map_command() before that, so rmnet_map_send_ack()
runs netif_tx_lock(skb->dev) on a NULL device. An unprivileged user
reaches this by unsharing a user+net namespace, creating an rmnet link
over a tap device with INGRESS_DEAGGREGATION and INGRESS_MAP_COMMANDS,
and writing an aggregated frame carrying a flow-control command to the
tap fd.
Restore the assignment dropped by 378e25357ac7, so every skb leaving
rmnet_map_deaggregate() has a valid device.
BUG: KASAN: null-ptr-deref in _raw_spin_lock (kernel/locking/spinlock.c:158)
Write of size 4 at addr 00000000000004b4 by task exploit/144
Call Trace:
_raw_spin_lock (kernel/locking/spinlock.c:158)
netif_tx_lock (net/sched/sch_generic.c:497)
rmnet_map_command (drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c:67)
rmnet_rx_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:125)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6103)
...
__netif_receive_skb_one_core (net/core/dev.c:6214)
netif_receive_skb (net/core/dev.c:6474)
tun_get_user (drivers/net/tun.c:1966)
tun_chr_write_iter (drivers/net/tun.c:2012)
vfs_write (fs/read_write.c:687)
ksys_write (fs/read_write.c:739)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: reject restart table growth beyond U16_MAX entries
During $LogFile replay, log_replay() indexes the transaction table by the
transact_id taken from the log record header. check_log_rec() only
verifies that transact_id is non-zero and properly aligned, not its
magnitude, so a crafted image can request an arbitrarily large index.
alloc_rsttbl_from_idx() grows the table to cover that index via
extend_rsttbl(), which passes the new entry count to init_rsttbl():
rt = init_rsttbl(esize, used + add);
used + add is computed as u32 but init_rsttbl() takes a u16, and the
count is stored in struct RESTART_TABLE as a __le16. When used + add
exceeds U16_MAX it is truncated, init_rsttbl() allocates a table far
smaller than the index requires, and alloc_rsttbl_from_idx() then
dereferences and writes at the original, untruncated offset -- an
out-of-bounds access past the allocation, reachable by mounting a
crafted NTFS image.
BUG: KASAN: use-after-free in alloc_rsttbl_from_idx (fs/ntfs3/fslog.c:950)
Read of size 4 at addr ffff8880327ffff8 by task exploit
alloc_rsttbl_from_idx (fs/ntfs3/fslog.c:950)
log_replay (fs/ntfs3/fslog.c:4562)
ntfs_loadlog_and_replay (fs/ntfs3/fsntfs.c:324)
ntfs_fill_super (fs/ntfs3/super.c:1393)
get_tree_bdev_flags
vfs_get_tree
path_mount
__x64_sys_mount
A restart table is limited to U16_MAX entries by its __le16 count, so a
larger growth request is invalid input. Reject it in extend_rsttbl();
all callers already handle a NULL return. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm6: fix out-of-bounds write in xfrm6_input_addr() when secpath is full
The depth check in xfrm6_input_addr() is off by one:
if (1 + sp->len == XFRM_MAX_DEPTH)
goto drop;
...
sp->xvec[sp->len++] = x;
xfrm_input() can leave sp->len == XFRM_MAX_DEPTH, and the transport-mode
receive path re-enters IPv6 input via xfrm_trans_reinject() with that
secpath preserved. If the inner packet carries a destination-options HAO
option or a type-2 routing header, xfrm6_input_addr() is called with
sp->len == XFRM_MAX_DEPTH; the check (1 + 6 == 6) is false, so
sp->xvec[sp->len++] writes one slot past the 6-element xvec[]. The write
stays within the sec_path allocation (invisible to KASAN); UBSAN_BOUNDS
flags it and panics under panic_on_warn.
Use "sp->len >= XFRM_MAX_DEPTH", matching xfrm_input(). This also
restores one chain level the old check rejected at sp->len == 5.
UBSAN: array-index-out-of-bounds in net/ipv6/xfrm6_input.c:309:10
index 6 is out of range for type 'xfrm_state *[6]' |
