| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix off-by-one in rtrefcount btree root level validation
xfs_rtrefcountbt_compute_maxlevels() sets
mp->m_rtrefc_maxlevels = min(d_maxlevels, r_maxlevels) + 1;
where the trailing "+ 1" already accounts for the inode-root level, so the
deepest valid on-disk root level is m_rtrefc_maxlevels - 1 and a cursor must
satisfy bc_nlevels <= bc_maxlevels (= m_rtrefc_maxlevels).
The two on-disk validation paths, xfs_rtrefcountbt_verify() and
xfs_iformat_rtrefcount(), check the root level with ">" instead of ">=", so a
crafted rtreflink (metadir + realtime + reflink) image whose
/rtgroups/N.refcount inode has bb_level == m_rtrefc_maxlevels is accepted on
mount. xfs_rtrefcountbt_init_cursor() then sets bc_nlevels = bb_level + 1,
exceeding bc_maxlevels by one. Since the xfs_rtrefcountbt_cur slab object is
sized for exactly bc_maxlevels entries, the first btree op on such a cursor
indexes bc_levels[m_rtrefc_maxlevels] past the end of the object. This is
reached by the first rtrefcount cursor built after mount, via log/CoW
recovery (xfs_reflink_recover_cow() during xfs_mountfs()) or an
FS_IOC_GETFSMAP over the realtime device.
Reject a root level equal to m_rtrefc_maxlevels, matching the ">=" form
already used by the sibling data-device refcount/rmap verifiers and the
in-memory rtrmap verifier.
BUG: KASAN: slab-out-of-bounds in xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101)
Write of size 2 at addr ffff888018391658 by task exploit/144
xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101)
xfs_btree_query_range (fs/xfs/libxfs/xfs_btree.c:5308)
xfs_refcount_recover_cow_leftovers (fs/xfs/libxfs/xfs_refcount.c:2113)
xfs_reflink_recover_cow (fs/xfs/xfs_reflink.c:1085)
xlog_recover_finish (fs/xfs/xfs_log_recover.c:3551)
xfs_mountfs (fs/xfs/xfs_mount.c:1158)
xfs_fs_fill_super (fs/xfs/xfs_super.c:1940)
get_tree_bdev_flags (fs/super.c:1634)
vfs_get_tree (fs/super.c:1694)
path_mount (fs/namespace.c:4161)
__x64_sys_mount (fs/namespace.c:4367)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
The buggy address belongs to the cache xfs_rtrefcountbt_cur of size 216
The buggy address is located 8 bytes to the right of
allocated 216-byte region [ffff888018391578, ffff888018391650)
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't double-lock when deleting a self-referential directory
LOLLM notices that the dirtree scrubber can detect a directory that
refers to itself. In this case, it's not correct for the directory tree
repair code to try to iolock/ilock both sc->ip and dp, because they're
the same inode. Fix this by detecting that corner case and handling it
appropriately. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: at91sam9_wdt: prevent timer rearm during teardown
at91_ping() rearms the watchdog timer from its callback. timer_delete()
neither waits for a running callback nor prevents it from rearming the
timer, so probe failure or driver removal can leave the timer accessing the
devm-allocated at91wdt after it has been freed.
Use timer_shutdown_sync() on both teardown paths. It waits for a running
callback and rejects any attempt by the callback to rearm the timer. |
| In the Linux kernel, the following vulnerability has been resolved:
rseq: Prevent hard lockup on granted time slice extension
__exit_to_user_mode_loop() invokes rseq_grant_timeslice_extension() with
interrupts enabled. If the extension is granted it invokes
hrtimer_rearm_deferred_tif() to ensure that a pending deferred hrtimer
rearm is handled before exiting to user space.
Though this invokes __hrtimer_rearm_deferred() which expects to be invoked
with interrupts disabled as it takes hrtimer_cpu_base::lock with
raw_spin_lock(). That's a livelock waiting to happen and caught by lockdep:
WARNING: ./include/linux/hrtimer_rearm.h:17 at irqentry_exit, CPU#1: slice_test
WARNING: inconsistent lock state
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
Prevent this by disabling interrupts around the invocation of
hrtimer_rearm_deferred_tif() in rseq_grant_timeslice_extension().
[ tglx: Massaged change log ] |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't swallow dquot recovery verification errors
xlog_recover_dquot_commit_pass2() validates the recovered dquot with
xfs_dqblk_verify() and, on failure, sets error = -EFSCORRUPTED and jumps
to out_release. But out_release unconditionally returns 0, so the
corruption error is discarded: the caller xlog_recover_items_pass2()
sees success, log recovery proceeds as if the dquot were valid, and the
corrupt quota buffer can be written back to disk. |
| IBM Langflow OSS 1.0.0 through 1.10.0 could allow a remote attacker to overwrite administrator email information and abuse the server as an outbound relay due to missing authentication for the registration endpoint. |
| In the Linux kernel, the following vulnerability has been resolved:
rtmutex: Use waiter::task instead of current in remove_waiter()
remove_waiter() is used by the slowlock paths, but it is also used for
proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from
futex_requeue().
In the latter case waiter::task is not current, but remove_waiter()
operates on current for the dequeue operation. That results in several
problems:
1) the rbtree dequeue happens without waiter::task::pi_lock being held
2) the waiter task's pi_blocked_on state is not cleared, which leaves a
dangling pointer primed for UAF around.
3) rt_mutex_adjust_prio_chain() operates on the wrong top priority waiter
task
Use waiter::task instead of current in all related operations in
remove_waiter() to cure those problems.
[ tglx: Fixup rt_mutex_adjust_prio_chain(), add a comment and amend the
changelog ] |
| A vulnerability was identified in Linux Kernel up to 4.19.316/5.4.278/5.10.220/5.15.161. This impacts the function tcp_getsockopt/tcp_setsockopt of the component TCP Handler. Such manipulation leads to race condition. A high complexity level is associated with this attack. The exploitability is said to be difficult. The vulnerability was introduced in 2.6.12, commit 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 ("Linux-2.6.12-rc2"). Upgrading to version 4.19.317, 5.4.279, 5.10.221, 5.15.162 and 6.1 will fix this issue. The name of the patch is fcd31dd8291b23d713245947ec2b2d99ef07aef2/3b32f265805a49071e2c4568a524398ba22bf93c/d529193eae979a7bf2255cd9fe68b7af7a1c91b3/5bb642cc3355ffd3c8bca0a8bd8e6e65bcc2091c/f49cd2f4d6170d27a2c61f1fecb03d8a70c91f57. The affected component should be upgraded. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: skip zero-sized firmware sections
panthor_fw_load_section_entry() skips BO creation when the firmware section
VA range is empty. If such a section is added to the firmware section list,
section->mem is left as NULL.
Later reload and unplug paths iterate over all firmware sections and
dereference section->mem, which can lead to a NULL pointer dereference.
Zero-sized firmware sections are valid, so accept them as no-op entries but
skip adding them to the section list. |
| An out-of-bounds (OOB) memory write flaw was found in the Linux kernel’s watch_queue event notification subsystem. This flaw can overwrite parts of the kernel state, potentially allowing a local user to gain privileged access or cause a denial of service on the system. |
| A use-after-free flaw was found in the Linux kernel’s FUSE filesystem in the way a user triggers write(). This flaw allows a local user to gain unauthorized access to data from the FUSE filesystem, resulting in privilege escalation. |
| A vulnerability has been found in Linux Kernel up to 5.10.162/5.15.85/6.0.15/6.1.1. The impacted element is the function btf_dump_name_dups of the file tools/lib/bpf/btf_dump.c of the component libbpf. The manipulation leads to use after free. Upgrading to version 5.10.163, 5.15.86, 6.0.16, 6.1.2 and 6.2 is sufficient to resolve this issue. The identifier of the patch is c61650b869e0b6fb0c0a28ed42d928eea969afc8/fbe08093fb2334549859829ef81d42570812597d/8c64a8e76eb85d422af5ec60ccbf26e3ead8c333/a733bf10198eb5bb927890940de8ab457491ed3b/93c660ca40b5d2f7c1b1626e955a8e9fa30e0749. You should upgrade the affected component. |
| In the Linux kernel, the following vulnerability has been resolved:
optee: ffa: Add NULL check in optee_ffa_lend_protmem
Sashiko (locally) reports a possible null dereference under memory
pressure due to the lack of validation of the allocated pointer.
Fix that by adding the missing check. |
| Guest triggered use-after-free in Linux xen-netback A malicious or buggy network PV frontend can force Linux netback to disable the interface and terminate the receive kernel thread associated with queue 0 in response to the frontend sending a malformed packet. Such kernel thread termination will lead to a use-after-free in Linux netback when the backend is destroyed, as the kernel thread associated with queue 0 will have already exited and thus the call to kthread_stop will be performed against a stale pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't walk off the end of a null sc->sa.agi_bp in AGI repair
LOLLM noticed a longstanding bug where xrep_iunlink_walk_ondisk_bucket
tries to walk ragi->sc->sa.agi_bp to rebuild the unlinked inode lists.
Unfortunately, it's possible for agi_bp to be null if the buffer
verifier fails, so we have to use ragi->agi_bp (which skips verifier
checks) instead. |
| In the Linux kernel, the following vulnerability has been resolved:
regmap: sdw-mbq: don't call an unset readable_reg callback
regmap_sdw_mbq_poll_busy() decides whether to poll the Function Busy bit
by calling ctx->readable_reg(), which is a straight copy of
config->readable_reg. That callback is optional: regmap_readable() treats
a NULL ->readable_reg as "every register is readable", and drivers rely on
that. es9356 and tac5xx2-sdw both build an MBQ regmap without one.
Since commit ca1b11b36d82 ("regmap: sdw-mbq: Allow defers on undeferrable
controls") the poll runs on every -ENODATA, not only for Controls the
driver marked deferrable, so any of those devices answering
COMMAND_IGNORED takes the kernel through a NULL function pointer.
Treat a missing callback the way the rest of regmap does and poll. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix NULL dereference due to missing ptp adjfine
Fix NULL dereference due to missing implementation of adjfine, which can
be triggered from usermode as follows:
sudo ./testptp -d /dev/ptp0 -f 0
[ 551.943697] BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
[ 552.061946] Call Trace:
[ 552.064487] <TASK>
[ 552.066681] ptp_clock_adjtime+0x1c0/0x2c0
[ 552.070874] ? get_clock_desc+0x6b/0xb0
[ 552.074825] pc_clock_adjtime+0x78/0xc0
[ 552.078755] __do_sys_clock_adjtime+0x85/0x110
[ 552.083293] do_syscall_64+0xea/0x610 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix NULL pointer dereference in amdgpu_dm_crtc_set_vblank()
amdgpu_dm_crtc_set_vblank() dereferences acrtc_state->stream when
vblank is enabled/queried from DRM_IOCTL_MODE_CRTC_GET_SEQUENCE before
a stream is attached to it.
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: amdgpu_dm_crtc_set_vblank+0x6b/0x4d0 [amdgpu]
Call Trace:
drm_vblank_enable
drm_vblank_get
drm_crtc_get_sequence_ioctl
drm_ioctl_kernel
drm_ioctl
Reproduced by running VKCTS with WSI tests enabled on RADV.
Guard the enable path on acrtc_state->stream being non-NULL, matching
the existing checks in this function.
(cherry picked from commit 7b1b31bf6942e6f43509b48da23f8e27269aac39) |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix another iunlink infinite loop bug in online fsck
xrep_iunlink_resolve_bucket is supposed to reconstruct as much of the
incore prev and next unlinked list pointers based on what it finds on
disk and in memory before we move on to relinking the truly lost inodes
back into the unlinked list. However, it's still vulnerable to infinite
loops that come in via the next_unlinked pointers.
Fix this problem by remembering which inodes we've already seen and
checking new agino pointers against that. If a bit is already set,
either this is a loop or the inode has nonzero link count. We'll deal
with the second case in a subsequent patch. |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: ohci: fix NULL pointer dereference in ar_context_release
During the error handling path of the driver's probe function, a NULL
pointer dereference can occur in ar_context_release().
When pci_probe() fails early (e.g., if pcim_enable_device() or MMIO mapping
fails), the devres cleanup mechanism invokes release_ohci(). This function
unconditionally calls ar_context_release() to clean up the asynchronous
receive contexts. However, if ar_context_init() was not yet called,
ctx->ohci remains NULL (as the fw_ohci structure is zero-initialized by
devres_alloc()).
ar_context_release() immediately dereferences ctx->ohci to get the dev
pointer before checking if the context was actually initialized, leading to
a crash:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:ar_context_release+0x3f/0x380 drivers/firewire/ohci.c:543
Call Trace:
release_ohci+0x3f/0x60 drivers/firewire/ohci.c:3567
release_nodes drivers/base/devres.c:546 [inline]
devres_release_all+0x1a8/0x260 drivers/base/devres.c:576
device_unbind_cleanup drivers/base/dd.c:597 [inline]
really_probe+0x451/0xae0 drivers/base/dd.c:772
To fix this, move the assignment of the dev pointer after the !ctx->buffer
check. If ctx->buffer is NULL, it indicates that the context was never
successfully initialized and there is nothing to release, safely avoiding
the dereference of the uninitialized ctx->ohci pointer. |
