| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm-io: report non-retryable errors separatedly
The error codes BLK_STS_NOTSUPP and BLK_STS_INVAL should not cause leg
failure on dm-raid1. This patch changes the interface to dm-io, so that
it reports two error bitmaps - error_bits and unsup_bits. The unsup_bit
bitmap tracks BLK_STS_NOTSUPP or BLK_STS_INVAL errors, the error_bits
bitmap tracks all the other errors.
dm-raid1 is changed so that it won't fail a leg if it receives an error
in the unsup_bits bitmap.
This patch (with 62dc37a819a5) fixes misbehavior if the user uses
unaligned bio vectors on dm-raid1. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-era: fix shadowed superblock leak on take-snap failure
metadata_take_snap() bumps the live superblock refcount and then
dm_tm_shadow_block() allocates a new block for the metadata snapshot.
If the subsequent dm_sm_inc_block() of writeset_tree_root or
era_array_root fails, the function only unlocks the clone and
returns. The newly allocated shadow block is never returned to the
metadata space map, so each failed take-snap permanently leaks one
metadata block.
Free the clone with dm_sm_dec_block() on those error paths, matching
the final step of metadata_drop_snap(). |
| In the Linux kernel, the following vulnerability has been resolved:
dm raid1: reserve space for NUL-terminator in build_constructor_string()
Reserve space for the termination NUL after the maximum 20 decimal
digits of a long long value to avoid buffer overflow in sprintf(). |
| In the Linux kernel, the following vulnerability has been resolved:
dm array: validate array block headers on read
array_block_check() validates blocknr and csum and nothing else, while
node_check(), next to it, has bounded the structural fields since both
were written. dm_array_cursor_next() takes its loop bound from the
on-disk nr_entries and element_at() is unguarded pointer arithmetic, so
a count larger than the block holds keeps the cursor in one block while
the index grows past it and the read walks off the dm-bufio buffer --
dm_cache_load_mappings() drives it once per cache block at activation.
Check the header against itself: reject a zero value_size, require
max_entries to equal calc_max_entries() for that value_size and block
size, and require nr_entries to fit. Equality rather than an upper bound,
since a count below the real capacity trips BUG_ON() in fill_ablock() and
trim_ablock(). Metadata dm-array writes satisfies all three. |
| In the Linux kernel, the following vulnerability has been resolved:
dm array: reject an array block whose value size is not the caller's
array_block_check() can only compare the header against itself, so a block
with value_size 4 and max_entries 1018 is internally consistent and passes.
dm-cache keeps two arrays -- mappings at 8 bytes and hints at 4 -- and the
roots for both live in the superblock. Point the mappings root at a hint
block and __load_mappings() walks it through an info whose value size is 8,
so element_at() strides 8 bytes over 4-byte entries and reaches offset 8160
of a 4096-byte block.
get_ablock() and __shadow_ablock() are the two places that hold the block
and the caller at once. Reject there when the two value sizes disagree.
Arrays only ever read their own blocks, so this fires on crafted metadata
only. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: apple-soc: Fix OPP table cleanup
apple_soc_cpufreq_init() adds OPP tables from firmware, but
some failure paths do not remove them. The driver also uses
dev_pm_opp_remove_all_dynamic(), which is not the right cleanup
helper for OPP tables loaded from firmware.
Use the cpumask OPP helper after the policy CPU mask has been
populated. Pair it with the matching cpumask remove helper on
failure paths and in apple_soc_cpufreq_exit(). This also removes
the separate dev_pm_opp_set_sharing_cpus() call, as the cpumask
helper loads the DT OPP tables for all CPUs in the policy. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: bound fwctl command payload to the input buffer
fwctl_cmd_rpc() copies cmd->in_len bytes into inbuf = kvzalloc(cmd->in_len)
and passes inbuf and in_len to ->fw_rpc(). The CXL callback cxlctl_fw_rpc()
ignores in_len and never checks the user-controlled op_size against it.
cxlctl_set_feature() bounds op_size only from below
(op_size <= sizeof(feat_in->hdr)) and then reads op_size - sizeof(hdr)
bytes from feat_in->feat_data via cxl_set_feature(). With a small in_len
and a large op_size the first memcpy() already reads past the
kvzalloc(in_len) buffer; the out-of-bounds bytes are placed in the mailbox
payload and sent to the device, and a large enough op_size can walk into
unmapped memory and oops the kernel. The Get paths pin op_size to a fixed
size but likewise read the input struct without checking in_len.
Reject, at the single dispatch point, any request whose fixed header plus
op_size does not fit in the copied-in buffer. The lower-bound test guards
the subtraction and ensures op_size was copied in before it is read. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/mce: Make the MCE notifier per-region
Flavien Solt reported lifetime issues with the CXL MCE notifier, which
can lead to NULL dereferences and use-after-free in the MCE handler.
The notifier was registered per memory device and stored in 'struct
cxl_memdev_state', even though it only needs the region state (the
region's SPA range and its extended linear cache size).
Instead of keeping the memory device and endpoint alive, the correct fix
is to move the notifier into 'struct cxl_region' and register it from
cxl_region_probe() as it should be a per-region notifier. Setup the
registration to only happen for regions that have an extended linear
cache as that is the only current usage.
Remove cxl_port_get_spa_cache_alias() as it is now dead code.
[ dj: Update dev_warn() when notifier fails due to kconfig. (Ben) ] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: serialize security confirmation handling
rfcomm_security_cfm() looks up a session on session_list and then walks
its DLC list without holding rfcomm_mutex. Since RFCOMM session teardown
uses rfcomm_mutex, krfcommd can close and free the same session and DLCs
concurrently:
hci_rx_work krfcommd
----------- ---------
rfcomm_session_get()
rfcomm_lock()
rfcomm_session_close()
rfcomm_dlc_unlink()
rfcomm_session_del()
kfree(s)
rfcomm_unlock()
walk s->dlcs
The callback can then read a freed session list head and touch freed DLCs
while updating their flags or timers.
Serialize the session lookup and DLC traversal in rfcomm_security_cfm()
with rfcomm_mutex. This matches the existing RFCOMM session lifetime
rules and prevents concurrent rfcomm_session_del() / rfcomm_dlc_unlink()
from tearing the objects down while the callback is using them.
KASAN reported:
BUG: KASAN: slab-use-after-free in rfcomm_security_cfm+0x41c/0x440
Read of size 8 at addr ffff888111fb3960 by task kworker/u17:1/89
Workqueue: hci0 hci_rx_work
Call Trace:
rfcomm_security_cfm+0x41c/0x440
hci_encrypt_cfm+0x139/0x590
hci_encrypt_change_evt+0x37b/0xc40
hci_event_packet+0x71b/0xb20
hci_rx_work+0x293/0x730
Allocated by task 69:
rfcomm_session_add+0x9e/0x2f0
rfcomm_run+0x44b/0x41e0
Freed by task 69:
kfree+0x131/0x3c0
rfcomm_session_del+0x188/0x220
rfcomm_run+0x1985/0x41e0 |
| In the Linux kernel, the following vulnerability has been resolved:
kho: fix size calculation in kho_preserved_memory_reserve()
kho_preserved_memory_reserve() calculates the size of a preservation by
doing 1 << (order + PAGE_SHIFT). Since the '1' is a 32-bit integer, it
can only be shifted by 31. That is, it will only work for preservations
up to 2 GiB. Larger preservations will trigger undefined behaviour.
While preservations larger than 2 GiB can't be obtained via folios
currently, they can be obtained via kho_preserve_pages().
For example, memblock reserve_mem uses kho_preserve_pages().
Reservations larger than 2 GiB are valid and will trigger this bug if
properly aligned.
Fix it by using 1UL for shifting. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: bound shrinker scans by examined checkpoint buffers
The jbd2 shrinker currently accounts only checkpoint buffers that it
successfully releases against nr_to_scan. Busy buffers therefore do not
consume the scan budget.
If a checkpoint transaction contains mostly busy buffers, the shrinker
can scan its entire checkpoint list while holding journal->j_list_lock.
Large checkpoint lists can result in excessive lock hold times and leave
other CPUs spinning on j_list_lock, causing soft lockups or RCU stalls.
Pass nr_to_scan into journal_shrink_one_cp_list() and decrement it for
every buffer examined, including busy buffers. Pass NULL from checkpoint
cleanup paths so their existing full-list behavior is preserved.
This restores the scan-budget semantics that existed before
journal_shrink_one_cp_list() was changed to always scan a complete
checkpoint list. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: check need_resched() when skipping busy checkpoint buffers
journal_shrink_one_cp_list() skips busy checkpoint buffers when called
with JBD2_SHRINK_BUSY_SKIP. The continue statement on this path also
skips the need_resched() check at the end of the loop body.
Consequently, when a checkpoint list contains mostly busy buffers, the
shrinker can walk the entire list while holding journal->j_list_lock,
even when a reschedule has been requested. Large checkpoint lists under
memory pressure can therefore cause long lock hold times and leave other
CPUs spinning on j_list_lock, resulting in soft lockups or RCU stalls.
Route the busy-buffer path through the need_resched() check so that the
shrinker can release j_list_lock and reschedule promptly, restoring
parity with the clean-buffer path, which already checks need_resched().
This does not change which checkpoint buffers are eligible for removal. |
| In the Linux kernel, the following vulnerability has been resolved:
ipip: fix skb leak in collect_md mode when metadata_dst allocation fails
In collect_md mode ipip_tunnel_rcv() returns 0 without freeing the skb
when ip_tun_rx_dst() fails to allocate the metadata_dst. ipip_rcv() and
mplsip_rcv() are registered as xfrm_tunnel handlers, so tunnel4_rcv()
and tunnelmpls4_rcv() read the zero return as "the packet has been
consumed" and do not free it either. The skb is leaked.
The other tunnel drivers all dispose of the packet at this point:
ip6_tunnel.c jumps to its drop label, ip_gre.c and ip6_gre.c return
PACKET_REJECT, which makes gre_rcv() free the skb. Only ipip returns 0.
Jump to the existing drop label instead. It frees the skb and still
returns 0, so the packet keeps being reported as consumed, which is what
we want here: the outer header has already been pulled, and neither the
remaining handlers nor an ICMP unreachable have any use for it.
Triggering this needs an ipip or mplsip tunnel in collect_md mode and an
atomic allocation failure, which is why it has gone unnoticed. |
| In the Linux kernel, the following vulnerability has been resolved:
ip: orphan prefetched skbs before multicast forwarding
IPv4 and IPv6 input preserve an skb->sk association installed by
bpf_sk_assign() so that local delivery can use the selected socket under
RCU. Both address families can also prefetch a socket in UDP early demux.
In both paths (BPF and UDP early demux) a reference is not guaranteed to
be held on the socket.
When a multicast packet is not locally deliverable, IPv6 hands the
original skb to ip6_mr_input(). IPv4's ip_mr_input() similarly keeps the
original skb when local delivery is not needed. Either path can put the
skb on an unresolved multicast route queue or forward it after the
receive-side RCU section ends.
After the prefetched socket is destroyed, a later skb free invokes
sock_pfree() and dereferences the stale skb->sk. Orphan the skb before
each non-local multicast forwarding path. Local delivery retains the
original skb; the existing skb_clone() calls provide multicast forwarding
with a socket-free clone. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: use skb_cow_head() in ip6_tnl_xmit()
ip6_tnl_xmit() may need to expand headroom before it can push the
outer IPv6 and optional encap headers. It currently does that with
skb_realloc_headroom(), copies skb->sk ownership, consumes the original
skb, and then continues processing with the replacement skb kept only in
its local variable.
That is safe only if the helper cannot fail afterwards. But this helper
still has post-reallocation error exits. collect_md tunnels reject
non-NONE encap after the replacement, and ip6_tnl_encap() can also fail
later. In those cases the helper returns an error to its callers while
the caller still only has the original skb pointer.
Both ip6_tnl_start_xmit() and the IPv6 GRE paths free the caller skb on
error, so they can end up freeing an skb that ip6_tnl_xmit() already
consumed.
Use skb_cow_head() instead. It provides the required headroom and
writability without privately replacing the caller-owned skb, so later
error returns cannot leave callers with a stale pointer.
The Ethernet users, ip6gretap and ip6erspan, clear IFF_TX_SKB_SHARING
and already call skb_cow_head() before entering ip6_tnl_xmit(). They do
not rely on the removed skb_shared() reallocation. This also makes the
IPv6 tunnel path consistent with ip_tunnel_xmit(). |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_gre: fix hardware header length for NBMA tunnels
ip6gre_tnl_link_config_route() accumulates the lower device's hardware
header length into dev->hard_header_len whenever header_ops is set. This
is incorrect for both users of header_ops.
ip6gretap and ip6erspan have a fixed Ethernet hardware header length.
For an NBMA ip6gre tunnel, ip6gre_header() creates only the GRE header,
the optional FOU or GUE header, and the outer IPv6 header. The lower
device header is headroom needed later, not part of the tunnel device's
hardware header.
Keep the lower device header in needed_headroom. Set hard_header_len to
the tunnel header length only for ARPHRD_IP6GRE devices with header_ops,
and leave the fixed Ethernet header length unchanged for tap and erspan
devices. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: rpl: fix NULL dereference of idev in ipv6_rpl_srh_rcv()
ipv6_rpl_srh_rcv() dereferences idev from __in6_dev_get() without a NULL
check when reading idev->cnf.rpl_seg_enabled.
When the device's MTU drops below IPV6_MIN_MTU, addrconf_ifdown() clears
dev->ip6_ptr through RCU_INIT_POINTER(). A packet that passed the idev
check in ip6_rcv_core() can then reach ipv6_rpl_srh_rcv() with
dev->ip6_ptr already NULL.
Reproduced by flooding the receiving interface with ping6 traffic while
flapping its MTU between 1500 and 1200:
BUG: KASAN: null-ptr-deref in ipv6_rpl_srh_rcv+0xb3/0x1070
Read of size 4 at addr 00000000000006b4 by task ping6/394
CPU: 2 UID: 0 PID: 394 Comm: ping6 Not tainted 7.2.0-rc7-micro-vm-dev-00095-g24ef02f934ee #240 PREEMPT(full)
Call Trace:
<IRQ>
kasan_report+0xc6/0x100
ipv6_rpl_srh_rcv+0xb3/0x1070
ip6_protocol_deliver_rcu+0x759/0x9a0
ip6_input_finish+0xa8/0x1b0
ip6_input+0xe1/0x490
ipv6_rcv+0x33d/0x460
__netif_receive_skb_one_core+0xd6/0x130
process_backlog+0x2cc/0xa00
__napi_poll.constprop.0+0x56/0x270
net_rx_action+0x327/0x730
handle_softirqs+0x11e/0x630
do_softirq+0xb3/0xf0
</IRQ>
Both ipv6_rpl_srh_rcv() and ipv6_srh_rcv() are called only from
ipv6_rthdr_rcv(), which already has an idev lookup.
Fix the NULL dereference on the RPL path by checking idev in
ipv6_rthdr_rcv(), before it calls either function. The callees take idev as
an argument and no longer call __in6_dev_get(), so the packet is now
dropped in one place, with SKB_DROP_REASON_IPV6DISABLED on both paths. |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Require LANDLOCK_ACCESS_FS_MAKE_REG for whiteout creation
Whiteout objects are used in the upper layer of an OverlayFS to
indicate that the file with this name does not exist in the unified
view, even if it is present in one of the lower layer file systems.
For the userspace implementations of OverlayFS (fuse-overlayfs),
whiteout objects can be created from userspace as well:
* mknod(2) with S_IFCHR and makedev(0, 0)
* renameat2(2) with RENAME_WHITEOUT,
creating the whiteout in the old place of the moved file.
This commit guards whiteout creation in both of these cases with
LANDLOCK_ACCESS_FS_MAKE_REG. Whiteout objects are *not* considered
character devices and are not bound to a driver.
LANDLOCK_ACCESS_FS_MAKE_REG describes the same permission class as a
whiteout object: creating one is the only S_IFCHR creation that the VFS
exempts from CAP_MKNOD, so it is as unprivileged as creating a regular
file, while LANDLOCK_ACCESS_FS_MAKE_CHAR and
LANDLOCK_ACCESS_FS_MAKE_BLOCK keep meaning the creation of devices that
expose a kernel interface [1].
For the mknod(2) case, introduce a Landlock erratum. The creation of
whiteout objects through mknod(2) was previously guarded using
LANDLOCK_ACCESS_FS_MAKE_CHAR, and it is now guarded using
LANDLOCK_ACCESS_FS_MAKE_REG.
For the renameat2(2) case, fix a bug: Before this commit, renameat2(2)
with RENAME_WHITEOUT would create a directory entry even when all
LANDLOCK_ACCESS_FS_MAKE_* rights were denied.
This does not affect normal renames within layered OverlayFS mounts:
When doing a regular rename() on a mounted fuse-overlayfs, it is the
fuse-overlayfs daemon that exercises renameat2() with RENAME_WHITEOUT,
and only the Landlock domain of that daemon is checked there.
Depends-on: 49c9e09d9610 ("landlock: Fix handling of disconnected directories")
Depends-on: fe72ce6710cb ("landlock: Add errata documentation section")
[mic: Record why LANDLOCK_ACCESS_FS_MAKE_REG is the matching right, and
add link(2) to the user doc] |
| In the Linux kernel, the following vulnerability has been resolved:
libnvdimm/labels: Prevent integer overflow in __nd_label_validate()
The on-media namespace index field nslot is a u32 read from the DIMM
label storage area. __nd_label_validate() bounds it against the config
area size, but sizeof_namespace_label() returns unsigned, so the product
nslot * label_size is evaluated in 32-bit and wraps modulo 2^32 before
the comparison. A crafted nslot passes the bound and is then used as the
loop trip count in nd_label_data_init(), whose memset() walks off the end
of the config_size buffer: an out-of-bounds write.
The field is not trusted -- it comes from the medium, or from userspace
via ND_CMD_SET_CONFIG_DATA. Evaluate the product in 64-bit so the bound
check is exact; conforming labels are unaffected.
The check was safe when introduced by commit 4a826c83db4e ("libnvdimm:
namespace indices: read and validate"): it multiplied by sizeof(struct
nd_namespace_label), a size_t, so on a 64-bit build the product did not
wrap. Commit 564e871aa66f ("libnvdimm, label: add v1.2 nvdimm label
definitions") narrowed it to 32 bits when the label size became a runtime
value read via sizeof_namespace_label(). |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix still_degraded being inverted in raid10_sync_request()
Commit fe6a19d40ceb ("md/md-bitmap: merge md_bitmap_start_sync() into
bitmap_operations") converted still_degraded from int to bool, but
inverted the assignment in the loop that checks whether the array will
still be degraded after the current device is recovered:
"still_degraded = 1" became "still_degraded = false".
As a result, recovering a device while another mirror is still missing
calls md_bitmap_start_sync() with degraded == false, which clears bitmap
bits that the still-missing device needs. When that device is re-added,
its bitmap-based recovery finds the bits already cleared and skips every
region written while the array was degraded, so it is marked In_sync
while holding stale data: silent corruption.
Reproducer (raid10 near=2, 4 disks, internal bitmap):
- fail and remove one disk of each mirror pair
- write to the degraded array
- re-add both disks and let recovery finish
- "check" reports mismatch_cnt=262272 after 256 MiB of degraded
writes and file contents differ; the second disk's "recovery"
completes in milliseconds because everything is skipped
The same conversion in raid1 got it right (still_degraded = true).
Restore the correct value. |
