| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A remote code execution vulnerability exists in Zimbra Collaboration (ZCS) before 10.1.20 when the optional zimbra-snmp package is installed and SNMP notifications are enabled. Due to improper sanitization of untrusted input during SNMP notification processing, an unauthenticated attacker can send specially crafted SMTP requests that may result in execution of arbitrary operating system commands as the Zimbra user. |
| Arbitrary file write in /vfm-admin/index.php?section=translations&action=update in Veno File Manager Project 4.4.9 allows an authenticated user with the role of super administrator to overwrite any php file in the application via a specially crafted POST request to the affected endpoint. |
| Exploitation through affected command-line operations could allow an authenticated low-privileged user to execute arbitrary commands as a privileged user on the underlying operating system. |
| The administrative operations within the Carbon Console do not adequately validate specific user-supplied input. This oversight allows a malicious actor with administrative privileges to inject and execute arbitrary code remotely.
Successful exploitation enables a threat actor with administrative privileges and Carbon Console access to execute remote arbitrary code through specific administrative operations, leading to a complete compromise of the affected system. |
| openssl_encrypt versions before 1.4.9 contain a weak key derivation vulnerability in the D-Bus CryptoService.EncryptFile handler that uses unstretched SHA-256 instead of Argon2id. Attackers can perform offline password guessing against encrypted files roughly six to seven orders of magnitude faster than documented protection by exploiting the missing key stretching and hash rounds. |
| openssl_encrypt versions before 1.4.9 fail to properly validate key derivation function costs in crafted files, allowing attackers to trigger unbounded memory and CPU exhaustion during pre-authentication processing. Attackers can supply malicious files with excessive KDF parameters to exhaust system resources and crash or wedge the process before password verification occurs. |
| openssl_encrypt versions before 1.4.9 derive the remote-pepper wrap key using unsalted HKDF-SHA256 or bare SHA-256 of the password, allowing identical keys across all users and files. Attackers with access to wrapped pepper blobs can precompute a single dictionary table and perform fleet-wide offline password guessing at hardware speed to recover user passwords. |
| There is a memory corruption vulnerability recently
discovered in NI LabVIEW that may result in information disclosure or arbitrary
code execution. Successful exploitation requires an attacker to get a
user to open a specially crafted VI. This vulnerability affects NI LabVIEW 2026 Q3 (26.3.0)
and prior versions. |
| An
unauthenticated denial-of-service vulnerability was identified in TP-Link TL-MR100 v3.2, TL-MR150 v3.2, TL-MR6400 v8.0 and Archer MR600 v2, due to improper handling of exceptional request conditions
that may lead to a NULL pointer dereference.
A remote attacker on an adjacent network can send a specially crated
HTTP request to trigger a crash of the HTTP service process.
Successful
exploitation may cause the HTTP service to crash, making the web management
interface and HTTP-dependent functionality temporarily unavailable. |
| Joomla! Core - [20260802] - Improper CORS origin validation in Joomla 4.0.0-5.4.7, 6.0.0-6.1.2 - An improper implementation prevented configured CORS origins from being properly validated in CORS requests. |
| GitPython before 3.1.58 contains a command execution vulnerability in the check_unsafe_options guard that can be bypassed by combining a single-character kwarg with split_single_char_options=False. Attackers can supply a crafted kwargs dictionary to guarded methods like clone_from to emit a joined token parsed as --upload-pack, enabling arbitrary OS command execution at default allow_unsafe_options=False. |
| GitPython versions before 3.1.58 contain an arbitrary file overwrite vulnerability in IndexFile.from_tree, IndexFile.reset, and IndexFile.merge_tree methods that append caller-influenced treeish strings to git read-tree without option validation or argument separation. Attackers can inject the --index-output option to overwrite arbitrary files with a valid git-index blob, destroying existing file content at attacker-controlled writable paths. |
| GitPython before 3.1.58 contains a remote code execution vulnerability in Repo.init that forwards unsafe git options without validation. Attackers can supply a template parameter pointing to a directory with malicious git hooks that execute arbitrary code when git operations are performed on the initialized repository. |
| There is a memory corruption vulnerability recently
discovered in NI LabVIEW that may result in information disclosure or arbitrary
code execution. Successful exploitation requires an attacker to get a
user to open a specially crafted VI. This vulnerability affects NI LabVIEW 2026 Q3 (26.3.0)
and prior versions. |
| There is a memory corruption vulnerability recently
discovered in NI LabVIEW that may result in information disclosure or arbitrary
code execution. Successful exploitation requires an attacker to get a
user to open a specially crafted VI. This vulnerability affects NI
LabVIEW 2026 Q3 (26.3.0) and prior versions. |
| Incorrect access control in the setElinkQosConfig function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to modify privileged QoS policy on the master device via sending a crafted MQTT message to the cs_broker component. |
| Joomla! Core - [20260807] - MFA Authentication Bypass in Joomla 4.0.0-5.4.7 and 6.0.0-6.1.2 - Insufficient state checks lead to a vector that allows to bypass 2FA checks. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix use-after-free in nvme_free_host_mem()
nvme_free_host_mem() frees dev->hmb_sgt via dma_free_noncontiguous()
but never clears the pointer afterward. This leads to a use-after-free
if nvme_free_host_mem() is called twice in the same error path.
This can happen during nvme_probe() when nvme_setup_host_mem() succeeds
in allocating the HMB (setting dev->hmb_sgt) but nvme_set_host_mem()
fails with an I/O error:
nvme_setup_host_mem()
nvme_alloc_host_mem_single() -> sets dev->hmb_sgt
nvme_set_host_mem() -> fails with -EIO
nvme_free_host_mem() -> frees hmb_sgt, but does NOT NULL it
return error
nvme_probe() error path:
nvme_free_host_mem() -> dev->hmb_sgt is stale, use-after-free
The second call dereferences the freed sgt, causing a NULL pointer
dereference in iommu_dma_free_noncontiguous() when it accesses
sgt->sgl->dma_address (the backing memory has been freed and zeroed).
This is reproducible on Thunderbolt-attached NVMe devices (e.g., OWC
Envoy Express behind a Dell WD22TB4 dock) where the device intermittently
returns I/O errors during HMB setup due to PCIe link instability.
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:iommu_dma_free_noncontiguous+0x22/0x80
Call Trace:
<TASK>
dma_free_noncontiguous+0x3b/0x130
nvme_free_host_mem+0x30/0xf0 [nvme]
nvme_probe.cold+0xcc/0x275 [nvme]
local_pci_probe+0x43/0xa0
pci_device_probe+0xeea/0x290
really_probe+0xf9/0x3b0
__driver_probe_device+0x8b/0x170
driver_probe_device+0x24/0xd0
__driver_attach_async_helper+0x6b/0x110
async_run_entry_fn+0x37/0x170
process_one_work+0x1ac/0x3d0
worker_thread+0x1b8/0x360
kthread+0xf7/0x130
ret_from_fork+0x2d8/0x3a0
ret_from_fork_asm+0x1a/0x30
</TASK>
Fix this by setting dev->hmb_sgt to NULL after freeing it, so the
second call takes the multi-descriptor path which safely handles the
already-cleaned-up state. |
| In the Linux kernel, the following vulnerability has been resolved:
irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT
On PREEMPT_RT, non-HARD irq_work runs in per-CPU kthreads via
run_irq_workd(), so irq_work_sync() uses rcuwait() to wait for BUSY==0.
After irq_work_single() clears BUSY via atomic_cmpxchg(), it still
dereferences @work for irq_work_is_hard() and rcuwait_wake_up().
An irq_work_sync() caller on another CPU that enters after BUSY is cleared
can observe BUSY==0 immediately, return, and free the work before those
accesses complete — causing a use-after-free.
Fix this by wrapping run_irq_workd() in guard(rcu)() so that the entire
irq_work_single() execution is within an RCU read-side critical
section. Then add synchronize_rcu() in irq_work_sync() after
rcuwait_wait_event() to ensure the caller waits for the RCU grace period
before returning, preventing premature frees. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/statmount: fix slab out-of-bounds write in statmount_mnt_idmap
statmount_mnt_idmap() writes one mapping with seq_printf() and then
manually advances seq->count to include the NUL separator.
If seq_printf() overflows, seq_set_overflow() sets seq->count to
seq->size. The manual seq->count++ changes this to seq->size + 1.
seq_has_overflowed() then no longer detects the overflow. The corrupted
count returns to statmount_string(), which later executes:
seq->buf[seq->count++] = '\0';
This causes a 1-byte NULL out-of-bounds write on the dynamically
allocated seq buffer.
Fix this by checking for overflow immediately after seq_printf(). |
