| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/ras: add ras_suspend callback and use it for cp_ecc_error_irq
cp_ecc_error_irq is acquired in amdgpu_gfx_ras_late_init() but
released in gfx_v9_0_hw_fini(), so the put site has to query
amdgpu_irq_enabled() because the get is skipped on SR-IOV VF.
ras_late_init / ras_fini have no suspend counterpart, so move the
put to amdgpu_gfx_ras_suspend() / amdgpu_gfx_ras_fini() and add a
matching ras_suspend callback that is invoked from
amdgpu_ras_suspend() before disable_all_features(). The get and
put now sit in the same place and check the same condition (not
VF, funcs registered), no refcount querying needed.
An active flag gates ras_fini so the
suspend-then-unload-without-resume path falls into
amdgpu_ras_block_late_fini_default() instead of double-releasing
what ras_suspend already cleaned up.
Drop the cp_ecc_error_irq put from gfx_v9_0_hw_fini(). gfx_v8_0
manages cp_ecc_error_irq locally and is unaffected; no other GFX
generation has this IRQ. |
| NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer where an unprivileged user could cause a double-free of imported memory state. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix double-unmap of directory block
Fix afs_edit_dir_remove() to use a cleanup function to unmap the block
pointed to by afs_dir_iter::block if it's left pointing to something rather
than manually kunmapping the blocks. Manually kunmapping without clearing
iter.blocks can result in a double-kunmap if afs_dir_find_block() is called
twice in a row (which would be the case if the block being modified is not
first in the hash chain). |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-fs: avoid double-free on failed queue setup
virtio_fs_setup_vqs() allocates fs->vqs and fs->mq_map before calling
virtio_find_vqs(). If virtio_find_vqs() fails, the error path frees both
pointers and returns an error to virtio_fs_probe().
virtio_fs_probe() then drops the last kobject reference, and
virtio_fs_ktype_release() frees fs->vqs and fs->mq_map again. This leaves
dangling pointers in struct virtio_fs and can trigger a double-free during
probe failure cleanup.
Set fs->vqs and fs->mq_map to NULL immediately after kfree() in the
virtio_fs_setup_vqs() error path so that the later kobject release sees an
uninitialized state and kfree(NULL) becomes harmless.
This can be reproduced when a broken virtio-fs device advertises more
request queues than the transport actually provides. In that case
virtio_find_vqs() fails while setting up the extra queue, and the probe
path reaches the double-free cleanup sequence. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.28.0, rdpsnd_server_recv_formats in channels/rdpsnd/server/rdpsnd_main.c frees context->client_formats on a malformed Client Audio Formats PDU without clearing the owning pointer or num_client_formats. An authenticated RDP client can trigger an error such as a cbSize larger than the remaining record, leave the dangling pointer in the server context, and cause rdpsnd_server_context_free to free the same allocation again at session teardown. This reliably terminates the server and can create allocator-dependent heap corruption. This issue is fixed in version 3.28.0. |
| In PCRE2 before 10.48, pcre2_jit_match mishandles a previously copied subject being passed in as a context. An incorrect free operation can occur. |
| When using LookupCNAME with the cgo DNS resolver, a very long CNAME response can trigger a double-free of C memory and a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "media: v4l2-dev: fix error handling in __video_register_device()"
This reverts commit 2a934fdb01db6458288fc9386d3d8ceba6dd551a.
The intentions of that patch were good, but it doesn't work.
The idea is that if device_register fails, you have to do a put_device
to let the ref counter release resources.
However, the V4L2 API says that if video_register_device() fails, then
you have to call video_device_release(), which kfree()s the video_device
struct.
But the put_device() will already have freed the struct, so you end
up in a double-free scenario.
There is not really a good way of fixing this without breaking
video_register_device() into two parts, one that initializes everything,
and one that does the actual device_register, and then converting all
V4L2 drivers to this new model.
That is a massive job, and it is very unlikely that device_register
will fail.
So rather than ending up in a double-free scenario, just revert this
patch, and in that case we'll have a small memory leak. Which is a lot
more robust. |
| In the Linux kernel, the following vulnerability has been resolved:
bnx2x: fix double free in bnx2x_init_firmware() error path
bnx2x_init_firmware() frees bp->init_ops, bp->init_data and
bp->init_ops_offsets in its error path without setting them to NULL.
The cleanup function bnx2x_release_firmware() frees the same three
pointers unconditionally, so if init_firmware fails and
release_firmware is later called (e.g. from __bnx2x_remove or through
the function state machine), all three are freed a second time.
Set each pointer to NULL after kfree() in the error path so that the
subsequent kfree(NULL) in bnx2x_release_firmware() is a safe no-op. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fix double end_creating() on the casefold-mismatch path
ovl_create_real() releases the new dentry twice when the casefold
consistency check fails. The S_IFDIR branch calls end_creating() and
sets err, then falls through to the common out: label which calls
end_creating() on the same dentry again:
case S_IFDIR:
newdentry = ovl_do_mkdir(ofs, dir, newdentry, attr->mode);
err = PTR_ERR_OR_ZERO(newdentry);
if (!err && ofs->casefold != ovl_dentry_casefolded(newdentry)) {
pr_warn_ratelimited(...);
end_creating(newdentry); /* first */
err = -EINVAL;
}
break;
...
if (err)
goto out;
...
out:
if (err) {
end_creating(newdentry); /* second, same dentry */
return ERR_PTR(err);
}
end_creating() is end_dirop(), which does inode_unlock() on the parent
and dput() on the dentry, so the parent directory's i_rwsem is unlocked
twice and the dentry is put twice. The second unlock releases a lock
that is not held, which is what wedges every later creation under that
parent, and the second dput() drops a reference that was never taken.
The branch was added by commit dfc7da402ccc ("ovl: Check for casefold
consistency when creating new dentries") as a bare dput(), which already
released the reference twice; commit fe497f0759e0 ("VFS: change
vfs_mkdir() to unlock on failure.") converted both sites to
end_creating(), adding the double unlock.
This is reachable by an unprivileged user. The casefold consistency of
the layers is validated at mount time in ovl_parse_layer(), and again on
every lookup in ovl_lookup_single(), but ofs->workdir is the internal
"work" subdirectory created inside the user-supplied workdir, and that
subdirectory is not re-checked. Marking it casefolded after the mount
therefore makes every ovl_create_temp() inherit the wrong state - and
that path reaches ovl_create_real() through ovl_start_creating_temp(),
which uses start_creating() with a generated name and so never runs the
lookup-time check.
unshare -Urm
mount -t tmpfs -o casefold=utf8-12.1.0 tmpfs mnt
mkdir -p mnt/lower/d mnt/upper mnt/work mnt/merged
mount -t overlay ovl -o lowerdir=mnt/lower,\
upperdir=mnt/upper,workdir=mnt/work mnt/merged
chattr +F mnt/work/work
mkdir mnt/merged/d/sub # directory copy-up
overlayfs: wrong inherited casefold (work/#5)
and the next copy-up blocks forever on the parent's i_rwsem:
mkdir D start_creating+0x65/0xb0
ovl_start_creating_temp+0xb0/0xe0 [overlay]
ovl_create_temp+0xa3/0x1d0 [overlay]
ovl_copy_up_one+0x1f1c/0x21c0 [overlay]
ovl_copy_up_flags+0xf5/0x140 [overlay]
ovl_create_object+0xb7/0x220 [overlay]
ovl_mkdir+0x23/0x40 [overlay]
Drop the end_creating() from the branch and let out: own the cleanup,
which is what every other error path in this function already does. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/vmw_pvrdma: Fix double free on pvrdma_alloc_ucontext() error path
Sashiko points out that pvrdma_uar_free() is already called within
pvrdma_dealloc_ucontext(), so calling it before triggers a double free. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: media: ipu7: fix double-free and use-after-free in error paths
In both ipu7_isys_init() and ipu7_psys_init(), pdata is allocated and
then passed to ipu7_bus_initialize_device(), which stores it in
adev->pdata. The ipu7_bus_release() function frees adev->pdata when the
device's reference count drops to zero.
Two error paths incorrectly call kfree(pdata) after the device teardown
has already freed it:
1. When ipu7_mmu_init() fails: put_device() is called, which drops the
reference count to zero and triggers ipu7_bus_release() ->
kfree(pdata). The subsequent kfree(pdata) is a double-free.
2. When ipu7_bus_add_device() fails: it calls auxiliary_device_uninit()
internally, which calls put_device() -> ipu7_bus_release() ->
kfree(pdata). The subsequent kfree(pdata) is again a double-free.
Note that the kfree(pdata) when ipu7_bus_initialize_device() itself
fails is correct, because in that case auxiliary_device_init() failed
and the release function was never set up, so pdata must be freed
manually.
Additionally, the error code was not saved before calling put_device(),
causing ERR_CAST() to dereference the already-freed adev pointer when
constructing the return value. Fix this by saving the error from
dev_err_probe() before put_device() and returning ERR_PTR() instead.
Remove the redundant kfree(pdata) calls and fix the use-after-free in
the return values of the two affected error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
net: shaper: reject duplicate leaves in GROUP request
net_shaper_nl_group_doit() does not deduplicate NET_SHAPER_A_LEAVES
entries. When userspace supplies the same leaf handle twice, the same
old-parent pointer lands twice in old_nodes[]. The cleanup loop double
frees the parent. Of course the same parent may still be in old_nodes[]
twice if we are moving multiple of its leaves.
Note that this patch also implicitly fixes the fact that the
i >= leaves_count path forgets to set ret. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Avoid double-deactivate of IRQs in the nested context
In the nested state, the physical interrupt has already been
deactivated through the HW bit in the LR. The extra deactivation
would be harmless but can hit an errata case on AmpereOne, so
avoid it here.
On AmpereOne, deactivating a physical interrupt through
ICC_DIR_EL1 or ICC_EOIR1_EL1 (depending on EOImode) which is not
active, but is the highest priority pending interrupt causes the
cpu to lose the interrupt pending state and also prevents the
delivery of future interrupts. |
| A vulnerability was determined in valkey-io valkey 9.1.0. Impacted is the function moduleTimerHandler of the file src/module.c of the component Module Timer Subsystem. This manipulation causes double free. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. Patch name: b349fe2821e3998534b1454c1b64a478daf8c6b7. To fix this issue, it is recommended to deploy a patch. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix double-add of pseudo-locked region's RMID to free list
A pseudo-locked group's RMID is freed when it is created. On unmount
rmdir_all_sub() unconditionally frees all RMID of all groups, resulting
in a double-free of the pseudo-locked group's RMID. The consequence of this
is that the original free results in the pseudo-locked group's RMID being
added to the rmid_free_lru linked list and the second free then attempts
to add the same RMID entry to the rmid_free_lru again.
Do not double-free a pseudo-locked group's RMID. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Check the interrupt is still ours before migrating it
vgic_prune_ap_list() drops both ap_list_lock and irq_lock while migrating
an interrupt to another vCPU. After reacquiring the locks it only checks
that the affinity is unchanged (target_vcpu == vgic_target_oracle(irq))
before moving the interrupt, which assumes that an interrupt whose affinity
is preserved is still queued on this vCPU's ap_list.
That assumption no longer holds if the interrupt is taken off the ap_list
while the locks are dropped. vgic_flush_pending_lpis() removes the
interrupt from the list and sets irq->vcpu to NULL, but leaves
enabled/pending/target_vcpu untouched. As the interrupt is still enabled
and pending, vgic_target_oracle() returns the same target_vcpu, so the
affinity check passes and list_del() is run a second time on an entry that
has already been removed.
Also check that the interrupt is still assigned to this vCPU
(irq->vcpu == vcpu) before moving it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sungem: fix probe error cleanup
gem_init_one() calls gem_remove_one() when register_netdev() fails.
gem_remove_one() unregisters and frees resources owned by the net_device,
including the DMA block, MMIO mapping, PCI regions, and the net_device
itself. gem_init_one() then falls through to its own cleanup labels and
frees the same resources again.
Keep the register_netdev() error path in gem_init_one(): clear drvdata so
PM/remove paths do not see a half-registered device, remove the NAPI
instance added during probe, and let the existing cleanup labels release
the resources once.
The issue was found by a local static-analysis checker for probe error
paths. The reported path was manually inspected before sending this fix.
Compile-tested with CONFIG_SUNGEM=y. Runtime testing was not performed
because no sungem hardware is available. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ump: fix double free of out_cvts on rawmidi error
snd_ump_attach_legacy_rawmidi() allocates the legacy conversion array
ump->out_cvts and, on the snd_rawmidi_new() error path, frees it with
kfree() but leaves ump->out_cvts pointing at the freed memory. When the
endpoint is later torn down, snd_ump_endpoint_free() frees ump->out_cvts
a second time, resulting in a double free.
The host snd-usb-audio driver attaches the legacy rawmidi for any USB
MIDI 2.0 (UMP) device, so a device that makes snd_rawmidi_new() fail
reaches this path on enumeration.
Clear ump->out_cvts after freeing it on the error path so it is not
freed again during teardown.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/hw_engine: Fix double-free of managed BO in error path
The error path in hw_engine_init() explicitly frees a BO allocated
with xe_managed_bo_create_pin_map() via xe_bo_unpin_map_no_vm().
Since the managed BO already has a devm cleanup action registered,
this causes a double-free when devm unwinds during probe failure.
Remove the explicit free and let devm handle it, consistent with
all other xe_managed_bo_create_pin_map() callers.
(cherry picked from commit e459a3bdeb117be496d7f229e2ea1f6c9fe4080b) |
