| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/MSI: Handle lack of irqdomain gracefully
Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a
RISCV platform which does not provide PCI/MSI support:
WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32
__pci_enable_msix_range+0x30c/0x596
pci_msi_setup_msi_irqs+0x2c/0x32
pci_alloc_irq_vectors_affinity+0xb8/0xe2
RISCV uses hierarchical interrupt domains and correctly does not implement
the legacy fallback. The warning triggers from the legacy fallback stub.
That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent
domain is associated with the device or not. There is a check for MSI-X,
which has a legacy assumption. But that legacy fallback assumption is only
valid when legacy support is enabled, but otherwise the check should simply
return -ENOTSUPP.
Loongarch tripped over the same problem and blindly enabled legacy support
without implementing the legacy fallbacks. There are weak implementations
which return an error, so the problem was papered over.
Correct pci_msi_domain_supports() to evaluate the legacy mode and add
the missing supported check into the MSI enable path to complete it. |
| Mattermost versions 10.0.x <= 10.0.1, 10.1.x <= 10.1.1, 9.11.x <= 9.11.3, 9.5.x <= 9.5.11 fail to properly validate email addresses which allows an unauthenticated user to bypass email domain restrictions via carefully crafted input on email registration. |
| A CWE-754 – Improper Check for Unusual or Exceptional Conditions vulnerability exists in Magelis HMI Panels (all versions of - HMIGTO, HMISTO, XBTGH, HMIGTU, HMIGTUX, HMISCU, HMISTU, XBTGT, XBTGT, HMIGXO, HMIGXU), which could cause a temporary freeze of the HMI when a high rate of frames is received. When the attack stops, the buffered commands are processed by the HMI panel. |
| psPAS PowerShell module does not explicitly enforce TLS 1.2 within the 'Get-PASSAMLResponse' function during the SAML authentication process. An unauthenticated attacker in a 'Man-in-the-Middle' position could manipulate the TLS handshake and downgrade TLS to a deprecated protocol. Fixed in 7.0.209. |
| Mattermost versions 9.11.x <= 9.11.6 fail to filter out DMs from the deleted channels endpoint which allows an attacker to infer user IDs and other metadata from deleted DMs if someone had manually marked DMs as deleted in the database. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in Phoenix SecureCore™ for Intel Kaby Lake, Phoenix SecureCore™ for Intel Coffee Lake, Phoenix SecureCore™ for Intel Comet Lake, Phoenix SecureCore™ for Intel Ice Lake allows Input Data Manipulation.This issue affects SecureCore™ for Intel Kaby Lake: before 4.0.1.1012; SecureCore™ for Intel Coffee Lake: before 4.1.0.568; SecureCore™ for Intel Comet Lake: before 4.2.1.292; SecureCore™ for Intel Ice Lake: before 4.2.0.334. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in Phoenix SecureCore™ for Intel Kaby Lake, Phoenix SecureCore™ for Intel Coffee Lake, Phoenix SecureCore™ for Intel Comet Lake, Phoenix SecureCore™ for Intel Ice Lake allows Input Data Manipulation.This issue affects SecureCore™ for Intel Kaby Lake: before 4.0.1.1012; SecureCore™ for Intel Coffee Lake: before 4.1.0.568; SecureCore™ for Intel Comet Lake: before 4.2.1.292; SecureCore™ for Intel Ice Lake: before 4.2.0.334. |
| IBM MQ 9.3 LTS, 9.3 CD, 9.4 LTS, and 9.4 CD
could allow a local user to cause a denial of service due to an improper check for unusual or exceptional conditions. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in Phoenix SecureCore Technology 4 allows Input Data Manipulation.This issue affects SecureCore Technology 4: from 4.0.1.0 before 4.0.1.1018, from 4.1.0.1 before 4.1.0.573, from 4.2.0.1 before 4.2.0.338, from 4.2.1.1 before 4.2.1.300, from 4.3.0.1 before 4.3.0.244, from 4.3.1.1 before 4.3.1.187, from 4.4.0.1 before 4.4.0.299, from 4.5.0.1 before 4.5.0.231, from 4.5.1.1 before 4.5.1.103, from 4.5.5.1 before 4.5.5.36, from 4.6.0.1 before 4.6.0.67. |
| Mattermost Confluence Plugin version <1.5.0 fails to handle unexpected request body which allows attackers to crash the plugin via constant hit to server webhook endpoint with an invalid request body. |
| Mattermost Confluence Plugin version <1.5.0 fails to handle unexpected request body which allows attackers to crash the plugin via constant hit to update channel subscription endpoint with an invalid request body. |
| Zoho ManageEngine OpManager, OpManager Plus, OpManager MSP, Network Configuration Manager, NetFlow Analyzer, Firewall Analyzer, and OpUtils before 2022-07-27 through 2022-07-28 (125657, 126002, 126104, and 126118) allow unauthenticated attackers to obtain a user's API key, and then access external APIs. |
| Mattermost Confluence Plugin version <1.5.0 fails to handle unexpected request body which allows attackers to crash the plugin via constant hit to server webhook endpoint with an invalid request body. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs
Fan speed minimum can be enforced from sysfs. For example, setting
current fan speed to 20 is used to enforce fan speed to be at 100%
speed, 19 - to be not below 90% speed, etcetera. This feature provides
ability to limit fan speed according to some system wise
considerations, like absence of some replaceable units or high system
ambient temperature.
Request for changing fan minimum speed is configuration request and can
be set only through 'sysfs' write procedure. In this situation value of
argument 'state' is above nominal fan speed maximum.
Return non-zero code in this case to avoid
thermal_cooling_device_stats_update() call, because in this case
statistics update violates thermal statistics table range.
The issues is observed in case kernel is configured with option
CONFIG_THERMAL_STATISTICS.
Here is the trace from KASAN:
[ 159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0
[ 159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444
[ 159.545625] Call Trace:
[ 159.548366] dump_stack+0x92/0xc1
[ 159.552084] ? thermal_cooling_device_stats_update+0x7d/0xb0
[ 159.635869] thermal_zone_device_update+0x345/0x780
[ 159.688711] thermal_zone_device_set_mode+0x7d/0xc0
[ 159.694174] mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core]
[ 159.700972] ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core]
[ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core]
[ 160.070233] RIP: 0033:0x7fd995909970
[ 160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ..
[ 160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970
[ 160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001
[ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700
[ 160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013
[ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013
[ 160.143671]
[ 160.145338] Allocated by task 2924:
[ 160.149242] kasan_save_stack+0x19/0x40
[ 160.153541] __kasan_kmalloc+0x7f/0xa0
[ 160.157743] __kmalloc+0x1a2/0x2b0
[ 160.161552] thermal_cooling_device_setup_sysfs+0xf9/0x1a0
[ 160.167687] __thermal_cooling_device_register+0x1b5/0x500
[ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0
[ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan]
[ 160.248140]
[ 160.249807] The buggy address belongs to the object at ffff888116163400
[ 160.249807] which belongs to the cache kmalloc-1k of size 1024
[ 160.263814] The buggy address is located 64 bytes to the right of
[ 160.263814] 1024-byte region [ffff888116163400, ffff888116163800)
[ 160.277536] The buggy address belongs to the page:
[ 160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160
[ 160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0
[ 160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2)
[ 160.309694] raw: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0
[ 160.318367] raw: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000
[ 160.327033] page dumped because: kasan: bad access detected
[ 160.333270]
[ 160.334937] Memory state around the buggy address:
[ 160.356469] >ffff888116163800: fc .. |
| A denial-of-service vulnerability exists in the Rockwell Automation PowerFlex® 600T. If the device is overloaded with requests, it will become unavailable. The device may require a power cycle to recover it if it does not re-establish a connection after it stops receiving requests. |
| The adapter @hono/node-server allows you to run your Hono application on Node.js. Prior to 1.10.1, the application hangs when receiving a Host header with a value that `@hono/node-server` can't handle well. Invalid values are those that cannot be parsed by the `URL` as a hostname such as an empty string, slashes `/`, and other strings. The version 1.10.1 includes the fix for this issue. |
| A security issue exists in the protected mode of EN4TR devices, where sending specifically crafted messages during a Forward Close operation can cause the device to crash. |
| metadata-extractor up to 2.16.0 can throw various uncaught exceptions while parsing a specially crafted JPEG file, which could result in an application crash. This could be used to mount a denial of service attack against services that use metadata-extractor library. |
| Cilium is a networking, observability, and security solution with an eBPF-based dataplane. For users with the following configuration: 1. An allow policy that selects a Layer 3 destination and a port range `AND` 2. A Layer 7 allow policy that selects a specific port within the first policy's range the Layer 7 enforcement would not occur for the traffic selected by the Layer 7 policy. This issue only affects users who use Cilium's port range functionality, which was introduced in Cilium v1.16. This issue is patched in PR #35150. This issue affects Cilium v1.16 between v1.16.0 and v1.16.3 inclusive. This issue is patched in Cilium v1.16.4. Users are advised to upgrade. Users with network policies that match the pattern described above can work around the issue by rewriting any policies that use port ranges to individually specify the ports permitted for traffic. |
| SpiceDB is a graph database purpose-built for storing and evaluating access control data. Use of a relation of the form: `relation folder: folder | folder#parent` with an arrow such as `folder->view` can cause LookupSubjects to only return the subjects found under subjects for either `folder` or `folder#parent`. This bug only manifests if the same subject type is used multiple types in a relation, relationships exist for both subject types and an arrow is used over the relation. Any user making a negative authorization decision based on the results of a LookupSubjects request with version before v1.30.1 is affected. Version 1.30.1 contains a patch for the issue. As a workaround, avoid using LookupSubjects for negative authorization decisions and/or avoid using the broken schema.
|
