| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat
BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to
userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40
bytes, which was the layout before the addition of 'query.revision'),
the kernel performs an out-of-bounds write.
Fix this by propagating the user-provided attribute size 'uattr_size'
down to the cgroup query handlers, and conditionally skipping writing
the revision field to userspace when the provided buffer size is
insufficient.
query.revision in bpf_mprog_query is structurally identical to the
cgroup case: a late tail field, written unconditionally.
But the backward-compat hazard is not the same.
The min-historical-size test is per command, and bpf_mprog_query only
serves attach types that were born with revision in the struct:
- tcx_prog_query -> BPF_TCX_INGRESS/EGRESS
- netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER
tcx, netkit, the revision field, and bpf_mprog_query itself all landed in
the same v6.6 merge window (053c8e1f235d added the mprog query API +
revision; tcx in e420bed02507, netkit in 35dfaad7188c). There has never
been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about
revision. So for these commands the minimum legitimate struct already
covers offset 56-64 — no old binary can be broken here.
Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in
2017; revision write-back was bolted on years later (120933984460). That
path has a real population of pre-revision callers. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/nldev: Fix locking when accessing mr->pd
Sashiko points out that, due to rereg_mr, the PD is actually variable and
all the touches in nldev are racy.
Use mr->device instead of mr->pd->device.
Getting the PD restrack ID is more tricky. To avoid disturbing all the
happy paths, add an rdma_restrack_sync() operation which is sort of like
flush_workqueue() or synchronize_irq(): after it returns, all the old
nldev touches to the mr are gone and everything sees the new PD. This
makes it safe to reach into the PD pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst
The br_netfilter fake rtable is embedded in struct net_bridge and is
attached to bridged packets with skb_dst_set_noref(). If such a packet is
queued to NFQUEUE, __nf_queue() upgrades that fake dst with
skb_dst_force().
At that point the queued skb can hold a real dst reference after bridge
teardown has started. The problem is not that every bridged packet needs
its own dst reference. The problem is that NFQUEUE can keep the bridge
private fake dst alive after unregister begins.
Fix this by keeping the bridge fake dst model unchanged and pinning the
bridge master device only while the packet sits in NFQUEUE. Record the
bridge device in nf_queue_entry when the queued skb carries a bridge fake
dst, take a device reference for the queue lifetime, and drop it when the
queue entry is freed.
Also make sure queued entries are reaped when that bridge device goes
down, and drop the redundant nf_bridge_info_exists() test from the fake
dst detection.
This keeps netdev_priv(br->dev) alive until verdict completion, so the
embedded fake rtable and its metrics backing storage cannot be freed out
from under dst_release(). It also avoids the constant refcount bump and
avoids using ipv4-specific dst helpers for IPv6 bridge traffic. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: xsk: Fix unlocked writing to ICOSQ
During napi poll, when the affinity changes and there's still XSK work
to be done, we trigger an ICOSQ interrupt on the new CPU. However, this
triggering on the ICOSQ is done unprotected.
There are 2 such races:
A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() is
running from a different CPU due to affinity change. This can happen
because IRQ triggering is done after napi_complete_done(). At this point
the NAPI can be scheduled on a different CPU. Like this:
CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI)
------------------------------- --------------------------------
napi_complete_done() clears SCHED
mlx5e_cq_arm(...)
napi_schedule_prep() sets SCHED
mlx5e_napi_poll()
mlx5e_xsk_alloc_rx_mpwqe()
mlx5e_icosq_sync_lock() // noop
memcpy 640 B UMR body
advance sq->pc by 10
mlx5e_trigger_irq(&c->icosq)
wqe_info[pi] = {NOP, 1}
mlx5e_post_nop() advances sq->pc
B) mlx5e_trigger_irq() is called on the ICOSQ when
mlx5e_trigger_napi_icosq() is running.
The obvious fix would be to lock the ICOSQ. But ICOSQ has an optimized
locking scheme that doesn't work for this scenario. Kick the async ICOSQ
instead which is always locked.
This issue was noticed in the wild with the following splat:
netdevice: ge-0-0-1: Bad OP in ICOSQ CQE: 0xd
WARNING: drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:826 [...]
[...]
Call Trace:
<IRQ>
mlx5e_napi_poll+0x11d/0x7f0 [mlx5_core]
__napi_poll+0x30/0x200
? skb_defer_free_flush+0x9c/0xc0
net_rx_action+0x2fe/0x3f0
handle_softirqs+0xd8/0x340
__irq_exit_rcu+0xbc/0xe0
common_interrupt+0x85/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x26/0x40
[...]
---[ end trace 0000000000000000 ]---
mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2022, qn 0x8f4,
opcode 0xd, syndrome 0x2, vendor syndrome 0x68
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 01 00 68 02 01 00 08 f4 de 14 59 d2
WQE DUMP: WQ size 16384 WQ cur size 0, WQE index 0x1e14, len: 64
00000000: 00 00 00 01 d9 ed 80 02 00 00 00 01 d9 ed 90 02
00000010: 00 00 00 01 d9 ed a0 02 00 00 00 01 d9 ed b0 02
00000020: 00 00 00 01 d9 ed c0 02 00 00 00 01 d9 ed d0 02
00000030: 00 00 00 01 d9 ed e0 02 00 00 00 01 d9 ed f0 02
mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2023, qn 0x8f4,
opcode 0xd, syndrome 0x5, vendor syndrome 0xf9
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 01 00 f9 05 01 00 08 f4 de 15 cf d2 |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix netfs_read_folio() to wait on writeback
Fix netfs_read_folio() to wait for an ongoing writeback to complete so that
it can trust the dirty flag and whatever is attached to folio->private
(folio->private may get cleaned up by the collector before it clears the
writeback flag). |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix managed cache race for unaligned extents
After unaligned compressed extents were introduced, the following race
could occur:
[Thread 1] [Thread 2]
(z_erofs_fill_bio_vec)
<handle a Z_EROFS_PREALLOCATED_FOLIO folio>
...
filemap_add_folio (1)
(z_erofs_bind_cache)
<the same folio is found..>
..
..
folio_attach_private (2)
filemap_add_folio (3) again
Since (1) is executed but (2) hasn't been executed yet, it's possible
that another thread finds the same managed folio in z_erofs_bind_cache()
for a different pcluster and calls filemap_add_folio() again since
folio->private is still Z_EROFS_PREALLOCATED_FOLIO.
Fix this by explicitly clearing folio->private before making the folio
visible in the managed cache so that another pcluster can simply wait
on the locked managed folio as what we did for other shared cases [1].
This only impacts unaligned data compression (`-E48bit` with zstd,
for example).
[1] Commit 9e2f9d34dd12 ("erofs: handle overlapped pclusters out of
crafted images properly") was originally introduced to handle crafted
overlapped extents, but it addresses unaligned extents as well. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: cache csum_start/csum_offset to fix TOCTOU in xsk_skb_metadata()
The TX metadata area resides in the UMEM buffer which is memory-mapped
and concurrently writable by userspace. In xsk_skb_metadata(),
csum_start and csum_offset are read from shared memory for bounds
validation, then read again for skb assignment. A malicious userspace
application can race to overwrite these values between the two reads,
bypassing the bounds check and causing out-of-bounds memory access
during checksum computation in the transmit path.
Fix this by reading csum_start and csum_offset into local variables
once, then using the local copies for both validation and assignment.
Note that other metadata fields (flags, launch_time) and the cached
csum fields may be mutually inconsistent due to concurrent userspace
writes, but this is benign: the only security-critical invariant is
that each field's validated value is the same one used, which local
caching guarantees. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction
Add guards to ensure ie_length is large enough before subtracting
fixed IE offsets to prevent unsigned integer underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: fix use-after-free bugs in mt7915_mac_dump_work()
When the mt7915 pci chip is detaching, the mt7915_crash_data is
released in mt7915_coredump_unregister(). However, the work item
dump_work may still be running or pending, leading to UAF bugs
when the already freed crash_data is dereferenced again in
mt7915_mac_dump_work().
The race condition can occur as follows:
CPU 0 (removal path) | CPU 1 (workqueue)
mt7915_pci_remove() | mt7915_sys_recovery_set()
mt7915_unregister_device() | mt7915_reset()
mt7915_coredump_unregister() | queue_work()
vfree(dev->coredump.crash_data) | mt7915_mac_dump_work()
| crash_data-> // UAF
Fix this by ensuring dump_work is properly canceled before
the crash_data is deallocated. Add cancel_work_sync() in
mt7915_unregister_device() to synchronize with any pending
or executing dump work. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix same-register dst/src OOB read and pointer leak in sock_ops
When a BPF sock_ops program accesses ctx fields with dst_reg == src_reg,
the SOCK_OPS_GET_SK() and SOCK_OPS_GET_FIELD() macros fail to zero the
destination register in the !fullsock / !locked_tcp_sock path.
Both macros borrow a temporary register to check is_fullsock /
is_locked_tcp_sock when dst_reg == src_reg, because dst_reg holds the
ctx pointer. When the check is false (e.g., TCP_NEW_SYN_RECV state with
a request_sock), dst_reg should be zeroed but is not, leaving the stale
ctx pointer:
- SOCK_OPS_GET_SK: dst_reg retains the ctx pointer, passes NULL checks
as PTR_TO_SOCKET_OR_NULL, and can be used as a bogus socket pointer,
leading to stack-out-of-bounds access in helpers like
bpf_skc_to_tcp6_sock().
- SOCK_OPS_GET_FIELD: dst_reg retains the ctx pointer which the
verifier believes is a SCALAR_VALUE, leaking a kernel pointer.
Fix both macros by:
- Changing JMP_A(1) to JMP_A(2) in the fullsock path to skip the
added instruction.
- Adding BPF_MOV64_IMM(si->dst_reg, 0) after the temp register
restore in the !fullsock path, placed after the restore because
dst_reg == src_reg means we need src_reg intact to read ctx->temp. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: aloop: Fix peer runtime UAF during format-change stop
loopback_check_format() may stop the capture side when playback starts
with parameters that no longer match a running capture stream. Commit
826af7fa62e3 ("ALSA: aloop: Fix racy access at PCM trigger") moved
the peer lookup under cable->lock, but the actual snd_pcm_stop() still
runs after dropping that lock.
A concurrent close can clear the capture entry from cable->streams[] and
detach or free its runtime while the playback trigger path still holds a
stale peer substream pointer.
Keep a per-cable count of in-flight peer stops before dropping
cable->lock, and make free_cable() wait for those stops before
detaching the runtime. This preserves the existing behavior while
making the peer runtime lifetime explicit. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc_ncm: add ndpoffset to NDP16 nframes bounds check
cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE
entries fit within the skb. The first check correctly accounts for
ndpoffset:
if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len)
but the second check omits it:
if ((sizeof(struct usb_cdc_ncm_ndp16) +
ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len)
This validates the DPE array size against the total skb length as if
the NDP were at offset 0, rather than at ndpoffset. When the NDP is
placed near the end of the NTB (large wNdpIndex), the DPE entries can
extend past the skb data buffer even though the check passes.
cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating
the DPE array.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc_ncm: add ndpoffset to NDP32 nframes bounds check
The same bounds-check bug fixed for NDP16 in the previous patch also
exists in cdc_ncm_rx_verify_ndp32(). The DPE array size is validated
against the total skb length without accounting for ndpoffset, allowing
out-of-bounds reads when the NDP32 is placed near the end of the NTB.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly.
Compile-tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: aloop: Fix racy access at PCM trigger
The PCM trigger callback of aloop driver tries to check the PCM state
and stop the stream of the tied substream in the corresponding cable.
Since both check and stop operations are performed outside the cable
lock, this may result in UAF when a program attempts to trigger
frequently while opening/closing the tied stream, as spotted by
fuzzers.
For addressing the UAF, this patch changes two things:
- It covers the most of code in loopback_check_format() with
cable->lock spinlock, and add the proper NULL checks. This avoids
already some racy accesses.
- In addition, now we try to check the state of the capture PCM stream
that may be stopped in this function, which was the major pain point
leading to UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Enforce expected_attach_type for tailcall compatibility
Yinhao et al. recently reported:
Our fuzzer tool discovered an uninitialized pointer issue in the
bpf_prog_test_run_xdp() function within the Linux kernel's BPF subsystem.
This leads to a NULL pointer dereference when a BPF program attempts to
deference the txq member of struct xdp_buff object.
The test initializes two programs of BPF_PROG_TYPE_XDP: progA acts as the
entry point for bpf_prog_test_run_xdp() and its expected_attach_type can
neither be of be BPF_XDP_DEVMAP nor BPF_XDP_CPUMAP. progA calls into a slot
of a tailcall map it owns. progB's expected_attach_type must be BPF_XDP_DEVMAP
to pass xdp_is_valid_access() validation. The program returns struct xdp_md's
egress_ifindex, and the latter is only allowed to be accessed under mentioned
expected_attach_type. progB is then inserted into the tailcall which progA
calls.
The underlying issue goes beyond XDP though. Another example are programs
of type BPF_PROG_TYPE_CGROUP_SOCK_ADDR. sock_addr_is_valid_access() as well
as sock_addr_func_proto() have different logic depending on the programs'
expected_attach_type. Similarly, a program attached to BPF_CGROUP_INET4_GETPEERNAME
should not be allowed doing a tailcall into a program which calls bpf_bind()
out of BPF which is only enabled for BPF_CGROUP_INET4_CONNECT.
In short, specifying expected_attach_type allows to open up additional
functionality or restrictions beyond what the basic bpf_prog_type enables.
The use of tailcalls must not violate these constraints. Fix it by enforcing
expected_attach_type in __bpf_prog_map_compatible().
Note that we only enforce this for tailcall maps, but not for BPF devmaps or
cpumaps: There, the programs are invoked through dev_map_bpf_prog_run*() and
cpu_map_bpf_prog_run*() which set up a new environment / context and therefore
these situations are not prone to this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix NULL dereference in ath11k_qmi_m3_load()
If ab->fw.m3_data points to data, then fw pointer remains null.
Further, if m3_mem is not allocated, then fw is dereferenced to be
passed to ath11k_err function.
Replace fw->size by m3_len.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
espintcp: remove encap socket caching to avoid reference leak
The current scheme for caching the encap socket can lead to reference
leaks when we try to delete the netns.
The reference chain is: xfrm_state -> enacp_sk -> netns
Since the encap socket is a userspace socket, it holds a reference on
the netns. If we delete the espintcp state (through flush or
individual delete) before removing the netns, the reference on the
socket is dropped and the netns is correctly deleted. Otherwise, the
netns may not be reachable anymore (if all processes within the ns
have terminated), so we cannot delete the xfrm state to drop its
reference on the socket.
This patch results in a small (~2% in my tests) performance
regression.
A GC-type mechanism could be added for the socket cache, to clear
references if the state hasn't been used "recently", but it's a lot
more complex than just not caching the socket. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix WARNING "do not call blocking ops when !TASK_RUNNING"
wait_event_timeout() will set the state of the current
task to TASK_UNINTERRUPTIBLE, before doing the condition check. This
means that ksmbd_durable_scavenger_alive() will try to acquire the mutex
while already in a sleeping state. The scheduler warns us by giving
the following warning:
do not call blocking ops when !TASK_RUNNING; state=2 set at
[<0000000061515a6f>] prepare_to_wait_event+0x9f/0x6c0
WARNING: CPU: 2 PID: 4147 at kernel/sched/core.c:10099 __might_sleep+0x12f/0x160
mutex lock is not needed in ksmbd_durable_scavenger_alive(). |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-bitmap: fix wrong bitmap_limit for clustermd when write sb
In clustermd, separate write-intent-bitmaps are used for each cluster
node:
0 4k 8k 12k
-------------------------------------------------------------------
| idle | md super | bm super [0] + bits |
| bm bits[0, contd] | bm super[1] + bits | bm bits[1, contd] |
| bm super[2] + bits | bm bits [2, contd] | bm super[3] + bits |
| bm bits [3, contd] | | |
So in node 1, pg_index in __write_sb_page() could equal to
bitmap->storage.file_pages. Then bitmap_limit will be calculated to
0. md_super_write() will be called with 0 size.
That means the first 4k sb area of node 1 will never be updated
through filemap_write_page().
This bug causes hang of mdadm/clustermd_tests/01r1_Grow_resize.
Here use (pg_index % bitmap->storage.file_pages) to make calculation
of bitmap_limit correct. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix overflow in dacloffset bounds check
The dacloffset field was originally typed as int and used in an
unchecked addition, which could overflow and bypass the existing
bounds check in both smb_check_perm_dacl() and smb_inherit_dacl().
This could result in out-of-bounds memory access and a kernel crash
when dereferencing the DACL pointer.
This patch converts dacloffset to unsigned int and uses
check_add_overflow() to validate access to the DACL. |
