| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM MQ could allow a remote attacker to execute arbitrary code due to a stack buffer overflow when processing TLS certificates with malformed distinguished names during channel connection establishment. |
| IBM MQ could allow an authenticated attacker to trigger a minor out-of-bounds read when sending malformed compressed data, though the data is not disclosed and the request is rejected. |
| Vulnerability in Oracle Essbase (component: Security). The supported version that is affected is 21.8.3.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Essbase. While the vulnerability is in Oracle Essbase, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Essbase accessible data. CVSS 3.1 Base Score 7.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:N). |
| IBM MQ could allow an authenticated attacker to cause a denial of service through a specially crafted message that triggers excessive memory operations during character set conversion. |
| BuildAdmin through 2.3.9 contains an insecure direct object reference vulnerability that allows authenticated backend administrators to modify other administrators' profiles via the id parameter. Attackers holding the routine/adminInfo/edit permission can overwrite avatar, nickname, email, mobile and motto fields, including a super administrator's email and mobile. |
| Misaka Danmu Server through 2.8.9 contains an authentication bypass vulnerability that allows unauthenticated attackers to write arbitrary configuration keys via the unprotected POST /api/ui/config-history/rollback endpoint. Attackers can set the ipWhitelist key to their own /32 address, or alter trustedProxies and webhookApiKey, to access every protected endpoint as the administrator. |
| sshportal through 1.19.5 contains a missing authorization vulnerability in the management shell 'key show' command that allows authenticated non-admin users to obtain decrypted backend private SSH keys. Attackers can request predictable key names like 'default' or 'host' to retrieve private keys and connect directly to backend hosts, bypassing ACLs and session recording. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: fix soft lockup in the netlink flow dump
A production compute node carrying a few thousand datapath flows hit a
soft lockup inside a single netlink flow dump and panicked.
ovs_flow_cmd_dump() calls ovs_flow_stats_get() for every flow it
emits, and that releases stats->lock with spin_unlock_bh() once per
CPU that has touched the flow. Every release is a local_bh_enable(),
and each one runs the pending softirq backlog in the dumping thread's
own context.
The skb bounds the flows one callback emits, but not the softirq work
it absorbs. On a CPU that carries the box's packet load the backlog
refills as fast as it drains, so the dumping thread becomes that CPU's
softirq engine. It never sleeps and it has no reschedule point, so
under voluntary preemption nothing can take the CPU away from it:
neither the ksoftirqd the kernel woke to take the work over, nor the
stopper thread the softlockup detector dispatches to refresh its
timestamp.
Hold BH off across the whole callback instead, the way
ctnetlink_dump_table() does, so the nested spin_unlock_bh() stop
draining softirqs. The loop already runs under rcu_read_lock() and
cannot sleep. What it gives up is preemption under CONFIG_PREEMPT,
since a BH-off region is not preemptible outside PREEMPT_RT. The
region stays short: the skb caps the flows one callback emits, and
empty buckets cost no skb space but are each visited once per dump, as
the cursor only moves forward. The table grows on insert and shrinks
only on flush, so the walk is bounded by the largest flow count the
datapath has held. The softirq backlog the callback used to absorb has
no bound at all. |
| In the Linux kernel, the following vulnerability has been resolved:
net: team: free skb when broadcast has no txable port
bc_transmit() sends the original skb through the last txable port.
When no port is txable, it returns false without consuming the skb, but
team_xmit() still returns NETDEV_TX_OK. AF_PACKET sends then retain the
skb and its socket write-memory charge.
A TX-enabled, link-down port keeps the broadcast transmit op installed.
Carrier can stay up through a second link-up, TX-disabled port or be
forced on by userspace. Free the original skb on the no-port path while
leaving the existing drop accounting intact.
Discovered by Sashiko during review of previous commit. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: reject net_iov in zerocopy receive mapping hints
After copying a readable prefix, receive_fallback_to_copy() asks
tcp_zerocopy_set_hint_for_skb() where page mapping can resume. If the
next skb is unreadable, find_next_mappable_frag() passes its net_iov
fragment to can_map_frag().
skb_frag_page() returns NULL for a net_iov, but can_map_frag()
dereferences it in PageCompound(). A v7.2 KASAN run on a connected TCP
socket with 64 readable bytes followed by a 4096-byte NET_IOV_DMABUF
fragment reported:
BUG: KASAN: null-ptr-deref in can_map_frag
tcp_zerocopy_receive -> can_map_frag
Kernel panic - not syncing: KASAN: panic_on_warn set
The diagnostic inserted the net_iov directly because the test host has
no devmem-capable NIC. Hardware end-to-end reachability remains untested
and requires CONFIG_NET_DEVMEM plus a supported DMA-buf-bound RX queue.
Reject all net_iov fragments before skb_frag_page(). This covers both
DMABUF and IOURING net_iov types while leaving page-backed checks
unchanged. With the guard, the same queue copied the readable prefix,
returned a 4096-byte skip hint, and completed without a fault. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: udp: Create exceptions before socket matching
Currently, when ICMPv6 Packet Too Big and Redirect Message packets are
locally delivered and quote a UDP packet, an exception is only created
in the IPv6 exception cache if the kernel can match the UDP packet to an
existing socket.
This behavior allows off-path attackers to conduct a side-channel attack
on the exception cache in order to discover the ephemeral port used by a
connected UDP socket.
Commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()") and
commit a00df2caffed ("ipv6: make exception cache less predictible") tried
to mitigate such attacks by making it harder for attackers to discover
hash collisions in the exception cache and by randomizing the number of
exceptions a hash bucket can hold, respectively. Unfortunately, both of
the mitigations can be bypassed.
Instead, mitigate such attacks by always creating an exception, even
before trying to find a matching socket. Do that by calling
ip6_update_pmtu() and ip6_redirect(), the helpers used when the quoted
packet did not originate from a socket.
This means that guesses (right or wrong) from an off-path attacker will
always result in an exception being created or updated in the cache that
the attacker can observe.
Pass the ifindex of the ingress device and the default uid, in a similar
fashion to icmpv6_err(). Unlike IPv4, an oif of 0 would not match any
nexthop in ip6_redirect_nh_match() and no exception would be created in
response to a Redirect Message.
Note that this does not allow attackers to create exceptions that they
could not create before, as both helpers can already be reached with
little to no validation. For example, by sending an ICMPv6 error that
quotes an ICMPv6 Echo Reply or one that quotes a UDP source port that
matches a wildcard socket.
Also note that in the good case (matched socket) the above scheme comes
at the cost of an extra route lookup, as the no socket helpers perform
their own lookup before the one performed by ip6_sk_update_pmtu() /
ip6_sk_redirect(). When the two resolve to different nexthops, it also
results in two exceptions being created for the same destination IP. One
in the exception cache of the nexthop resolved by the no socket helpers
and another in the exception cache of the nexthop used by the socket. |
| In the Linux kernel, the following vulnerability has been resolved:
readdir: take no inode lock on an immutable directory
iterate_dir() takes the directory's i_rwsem shared and holds it across
->iterate_shared(). For a directory that never has an entry and is
never removed the lock keeps nothing still, it only orders every reader
and every writer of that inode behind each other.
For the directory of a nullfs instance that matters. The instance of
the initial mount namespace is the root of every empty mount namespace
and the private instance is the root of every kernel thread, so one
inode is shared across users who have nothing else in common. And a
reader can hold the lock for as long as it likes: back the getdents()
buffer with a mapping of a file on a FUSE mount of your own, let the
copy of "." and ".." fault and let the server wait. Queue an exclusive
taker behind it, a mkdir() in that directory goes through start_dirop()
before the read-only mount is reported, and from then on every lookup
that misses the dcache in that directory, every create and every mount
on it waits until the server answers. One user of an empty mount
namespace stalls all the others.
Add FOP_IMMUTABLE for the file operations of a directory that never
changes and is never removed and let iterate_dir() skip the lock for
it. The flag never changes for a file, ->f_pos is protected by
f_pos_lock since directories are FMODE_ATOMIC_POS, IS_DEADDIR can't be
set on such a directory and neither touch_atime() nor fsnotify take
i_rwsem. Set it on the nullfs directory. The placeholder directories of
libfs never have an entry either but their owners remove them, so they
keep the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix CPU hotplug hang when a dying CPU's tasks sit in the BPF scheduler
A CPU going down has to empty its own rq. Its hotplug thread waits in
sched_cpu_wait_empty() until nothing else is left, and the only thing that
wakes it is balance_push(), which runs from __schedule() on the dying CPU
and pushes off the migratable tasks the CPU picks.
sched_ext breaks this. A task sitting on a user DSQ or held by the BPF
scheduler is still counted on its rq, but an inactive CPU no longer calls
ops.dispatch() and can't pull the task back. The dying CPU goes idle with
the task still counted, and one of two things happens:
- Another CPU consumes the task. The rq empties without a __schedule() on
the dying CPU, so the hotplug thread is never woken and cpu_down() hangs
holding cpu_hotplug_lock.
- The task is affine only to the dying CPU. Nothing can move it, and the
offline stalls until the watchdog ejects the BPF scheduler.
When the rq goes offline, re-enqueue every task on it that isn't already on
the local DSQ. An enqueue on an offline rq lands on the local DSQ, so the
dying CPU itself picks the tasks and balance_push() pushes them off, the
same as for the other sched classes. From then on no sched_ext path on
another CPU can pull a task off the rq.
ops.dispatch() currently stops as soon as the CPU goes inactive, and CPU
hotplug then waits for an RCU grace period before taking the rq offline. A
BPF-held task affine only to the dying CPU and preempted inside an RCU
read-side critical section would block that grace period, and the rq would
never go offline. Test SCX_RQ_ONLINE directly so that ops.dispatch() keeps
running until the rq goes offline. Only the dying CPU's own hotplug thread
clears the flag during teardown, and task_can_run_on_remote_rq() still keeps
other rqs' tasks off the CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: validate the superblock on resume
dm_integrity_resume() re-reads the superblock from the device so that it
picks up the flags and the recalculate position. It performs no
validation on the result, while the constructor validates the superblock
it reads and sizes all the in-memory structures according to it. The user
may modify the superblock on the underlying device while the dm-integrity
device is suspended, so that the two no longer agree.
In particular, access_journal_data() shifts the journal entry index by
ic->sb->log2_sectors_per_block, while ic->journal_section_sectors and the
journal page list were computed with the value that was present at
constructor time. Increasing log2_sectors_per_block makes the index run
past the end of the journal, and dm-integrity then writes 512 bytes
through lowmem_page_address(NULL).
Snapshot the validated superblock in the constructor and refuse to resume
if any of the fields that describe the on-disk geometry changed. |
| Reliance on untrusted inputs in a security decision in Windows PowerShell allows an unauthorized attacker to execute code over a network. |
| Improper verification of cryptographic signature in Windows Schannel allows an unauthorized attacker to perform spoofing over a network. |
| Out-of-bounds write in Windows Fast FAT Driver allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in WebDAV allows an authorized attacker to elevate privileges locally. |
| Out-of-bounds read in Windows Installer allows an authorized attacker to disclose information locally. |
| Files or directories accessible to external parties in Windows Event Viewer allows an authorized attacker to disclose information over a network. |
