| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/efa: Fix PBL chunk length computation
On register MR, when creating the PBL, if it's an indirect PBL we create
a chunk list to hold the PBL pages pointers. Each chunk is 4KB in size
and can hold 510 addresses (EFA_PTRS_PER_CHUNK) and has a 12-byte
control buffer at the end of it holding the next chunk's pointer and its
length.
If the PBL number of pages is a multiple of EFA_PTRS_PER_CHUNK, the
calculated last chunk length is wrongly computed as 0, even though that
chunk is fully populated with 510 real page pointers. This wrong length
is used both to DMA map the chunk and is propagated to the device,
causing the device to see the chunk as empty and reject the memory
registration.
Fix the calculation so it will be performed only if the number of pages
isn't a multiple of EFA_PTRS_PER_CHUNK, if it is, its already handled in
the above loop correctly.
Also prevent out-of-bounds reach in the chunks array in such scenario. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/pwrctrl: tc9563: Fix parsing the integrated Ethernet MAC Endpoint node
DSP3 has an integrated Ethernet MAC Endpoint which has its own set of
config registers for configuring settings such as ASPM. The Endpoint device
has two physical functions and those two functions share the same settings.
Parse the Endpoint node under DSP3 instead of parsing both functions. The
existing parsing logic also has one OOB issue as parsing both functions
will result in accessing past the tc9563_pwrctrl->cfg array. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: bcm2835: Don't remove an unregistered GPIO chip
If the devm_pinctrl_register() function fails,
bcm2835_pinctrl_probe() calls gpiochip_remove()
before gpiochip_add_data() has registered the GPIO chip.
This means that upon failure the gpio_chip.gpiodev
is NULL resulting in a null pointer dereference
inside the gpiochip_remove() function.
Remove the unnecessary function call to gpiochip_remove().
No GPIO cleanup is required because the GPIO chip
has not yet been registered. Without this change there
is potential for a kernel panic upon registration failure |
| In the Linux kernel, the following vulnerability has been resolved:
staging: octeon: add missing tasklet_kill in cvm_oct_tx_shutdown
The TX cleanup tasklet can be scheduled by the watchdog IRQ handler
to execute cvm_oct_tx_do_cleanup. There can be a pending tasklet in
the queue which might run after the cvm_oct_remove() frees net_device
structures, causing a use-after-free in cvm_oct_tx_do_cleanup() as it
iterates cvm_oct_device[] which is an array of netdevice pointers.
Add tasklet_kill() after free_irq() to ensure the tasklet is no longer
scheduled or running before teardown proceeds. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: restore active device pointers after failed sprout
btrfs_init_new_device() switches latest_dev and possibly s_bdev from the
seed device to the new sprout device before creating the first writable
chunks.
If chunk creation or the subsequent sprout setup fails, the error path
releases the new device without switching those pointers back.
btrfs_show_devname() can then dereference the freed latest_dev and crash.
Restore the active device pointers to the latest seed device before
removing and releasing the failed sprout device. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in UiCore UiCore Elements uicore-elements allows Stored XSS.This issue affects UiCore Elements: from n/a through 1.3.17. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Premmerce Premmerce Product Search for WooCommerce premmerce-search allows Stored XSS.This issue affects Premmerce Product Search for WooCommerce: from n/a through 2.2.7. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack: use get_unaligned_be32() in tcp_sack()
The timestamp-only fast path dereferences the option stream as
*(__be32 *)ptr, which assumes 4-byte alignment that the TCP option
stream does not guarantee. Use get_unaligned_be32() instead, which
reads the value safely and already returns host byte order, so the
htonl() on the comparison constant can be dropped.
This matches the existing get_unaligned_be32() use later in the same
function. |
| Incorrect Privilege Assignment vulnerability in MultiVendorX Product Catalog Enquiry for WooCommerce by MultiVendorX woocommerce-catalog-enquiry allows Privilege Escalation.This issue affects Product Catalog Enquiry for WooCommerce by MultiVendorX: from n/a through 6.1.5. |
| Docmost is open-source collaborative wiki and documentation software. Prior to 0.90.1, an authenticated workspace ADMIN can use the workspace invitation flow to invite an external email address with the OWNER role because the role ceiling does not prevent ADMIN users from granting privileges above their own. When the invitation is accepted, the new account receives OWNER-level permissions, allowing the ADMIN to create a backdoor OWNER account or promote a colluding external user to the workspace's highest privilege level. This issue is fixed in version 0.90.1. |
| redis-parser through 3.0.0 fails to validate the multi-bulk length value in RESP protocol parsing, allowing attackers to trigger an uncaught RangeError by supplying an excessively large declared length. A malicious or compromised Redis endpoint can deliver a crafted RESP header with a length above 2^32-1 to crash the Node.js client process. |
| ServiceNow has remediated an authorization bypass security issue that was identified in the ServiceNow AI Platform. This security issue, if exploited, could enable an unauthenticated user to access data within the ServiceNow AI Platform that the user otherwise would not be entitled to access, potentially enabling further unintended access.
ServiceNow deployed a security update to hosted instances and ServiceNow provided the update to our partners and self-hosted customers. We are not currently aware of malicious exploitation against ServiceNow instances. We recommend customers promptly apply appropriate updates or upgrade to a patched release if they have not already done so. |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: audio: bound the topology section sizes against the fetched size
gb_audio_gb_get_topology() fetches a topology blob of a module-supplied
size, and gbaudio_tplg_parse_data() then walks it by adding the
module-supplied size_dais, size_controls and size_widgets fields to
form the control, widget and route section offsets. Those le32 sizes
are never checked against the fetched blob, so a module reporting a
small topology size but large section sizes makes the offsets point
past the allocation, and parsing reads out of bounds.
Reject a topology whose section sizes do not fit within the fetched
size before it is parsed. |
| An out-of-bounds read in libXi's XQueryDeviceState() in libXi before 1.8.4 could be used by a |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: wait for rcu grace period before freeing pernet state
sashiko reports: "nfnl_log_net_exit() calls nf_log_unset(), which
clears the logger pointer without an RCU grace period. Immediately after,
ops_free_list() frees the per-net state while concurrent packets might
still be executing nf_log_packet() under rcu_read_lock()."
Clear the pointer via .pre_exit to make sure rcu readers have completed
before pernet storage is free'd. The change in nf_log_syslog.c is only
done for consistency: it doesn't use pernet data. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: do not use make_bad_inode() in ocfs2_read_inode_block_full()
This reverts commit 58b6fcd2ab34 ("ocfs2: mark inode bad upon validation
failure during read").
Since 'make_bad_inode()' resets inode type to S_IFREG, doing this for
directory inode during active VFS lookup is likely to confuse the latter,
including VFS_BUG_ON_INODE() triggered in this case. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: skip extra isize expansion during mount to prevent deadlock
ext4_try_to_expand_extra_isize() is called from __ext4_mark_inode_dirty()
while holding an active jbd2 handle. During mount (!SB_ACTIVE), the
expand path may move xattrs to external blocks and release ea_inodes via
iput(). When !SB_ACTIVE, iput() calls write_inode_now() which acquires
s_writepages_rwsem, creating a circular lock dependency:
s_writepages_rwsem --> jbd2_handle --> xattr_sem --> s_writepages_rwsem
This can be triggered via:
ext4_process_orphan() -> ext4_truncate() -> ext4_mark_inode_dirty()
-> ext4_try_to_expand_extra_isize()
or:
ext4_evict_inode() -> ext4_mark_inode_dirty()
-> ext4_try_to_expand_extra_isize()
Skip expansion when !SB_ACTIVE. This is a minor loss of functionality
(extra isize won't grow for these inodes during mount), which e2fsck
can resolve later if needed. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow interpreter fallback for BPF_ADDR_PERCPU insn
The BPF_MOV64_PERCPU_REG insn requires JIT to emit native code to for
'dst_reg = src_reg + <percpu_base_off>'.
However, the interpreter ignores the 'off' at its ALU64_MOV_X label.
The 'off' indicates the insn is BPF_MOV64_PERCPU_REG insn. Then, when
the interpreter loads memory from the register, it will hit a page
fault.
[ 2.545572] BUG: unable to handle page fault for address: ffffffffacaaf034
[ 2.546485] #PF: supervisor read access in kernel mode
[ 2.547167] #PF: error_code(0x0000) - not-present page
[ 2.547850] PGD 134e63067 P4D 134e63067 PUD 134e64063 PMD 10021c063 PTE 800ffffeca550062
[ 2.548912] Oops: Oops: 0000 [#1] SMP PTI
Set jit_required as true in order to disallow interpreter fallback in
core.c::__bpf_prog_select_runtime(), if any BPF_ADDR_PERCPU insn is
patched to the prog.
BTW, rename the helper bpf_map_supports_cpu_flags() to
bpf_map_is_percpu_map(). |
| Wazuh is an open-source security platform providing unified XDR and SIEM protection for endpoints and cloud workloads. From 3.8.0 until 4.14.7, the _getattributes() function in src/os_xml/os_xml.c recursively processes every XML attribute without a depth limit while allocating two large local buffers in each stack frame. An enrolled agent can submit a Windows EventChannel event containing an element with enough attributes to exhaust the analysisd worker-thread stack, trigger a segmentation fault, and interrupt log ingestion. The element-depth limit in _ReadElem() does not constrain the number of attributes on one element, so it does not prevent this condition. This issue is fixed in version 4.14.7. |
| TREK is a collaborative travel planner. Prior to 3.3.0, TREK allows an authenticated user to store an attacker-controlled llm_base_url through the settings API when the LLM_PARSING feature is enabled. Write permission to the target trip instance is required to trigger the vulnerable AI-assisted import path. The value is consumed by the clients in server/src/nest/llm-parse/clients/openai-compatible.client.ts, server/src/nest/llm-parse/clients/anthropic.client.ts, and server/src/nest/llm-parse/router/ollama-format.client.ts without applying the server-side request forgery guard. Triggering AI-assisted trip parsing causes the server to request the supplied destination, and upstream error response text can be returned in parsing warnings. This permits internal service discovery and access to link-local cloud metadata, with possible disclosure of infrastructure credentials and subsequent modification of protected cloud resources. This issue is fixed in version 3.3.0. |
