| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: bound $AttrDef table walk to the loaded table size
ntfs_attr_find_in_attrdef() walks the in-memory $AttrDef table, but the
loop condition bounds only the start of each entry, not the whole entry:
for (ad = vol->attrdef; (u8 *)ad - (u8 *)vol->attrdef <
vol->attrdef_size && ad->type; ++ad)
struct attr_def is 160 bytes; the guard reads ad->type at offset 128 and
the loop body reads further fields. vol->attrdef is kvzalloc(i_size),
where i_size is the on-disk $AttrDef data size, checked in
load_and_init_attrdef() only as 0 < i_size <= 0x7fffffff. A volume whose
$AttrDef data size is smaller than one entry (e.g. 120 bytes) makes the
read of ad->type run past the allocation. Creating a file reaches this
through ntfs_attr_size_bounds_check() and reads out of bounds:
BUG: KASAN: slab-out-of-bounds in ntfs_attr_find_in_attrdef+0x66/0xa0
Read of size 4 at addr ffff888005833280 by task init/1
ntfs_attr_find_in_attrdef
ntfs_attr_size_bounds_check
ntfs_attr_can_be_non_resident
ntfs_attr_add
Require the whole entry to lie within attrdef_size in the loop guard, and
reject at mount a $AttrDef too small to hold one attr_def entry. |
| Out-of-bounds Write in the natural width branch of the text sizing protocol in kitty from 0.40.0 before 0.49.0 allows a program writing to the terminal to write past the end of a fixed-size buffer, because screen_handle_multicell_command() in kitty/screen.c appends each codepoint of a grapheme cluster with lc.chars[lc.count++] = ch without any capacity check, while lc is declared by the RAII_ListOfChars macro as a four-element char_type array in the function's stack frame, so an OSC 66 escape code whose payload carries a grapheme cluster longer than four codepoints writes beyond that buffer, one 32-bit value per additional codepoint, in the order the codepoints appear. Where the cluster is preceded in the same payload by a sequence that causes an intermediate flush, the buffer is first migrated to the heap by ensure_space_for_chars() and the write occurs past the heap allocation instead. This results in termination of the kitty process and therefore of all its windows, tabs and child processes. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in dashbitco lazy_html allows mutation XSS via a parse and serialize round-trip of attacker-supplied HTML.
LazyHTML.to_html/2 and LazyHTML.Tree.to_html/2 decide whether to escape an element's text from its tag name alone. A style or script element inside SVG or MathML foreign content is parsed with character references decoded, but is serialized as an HTML raw-text element, so its text is emitted unescaped. Encoded markup such as </style><img src=x onerror=...> inside <svg><style> therefore closes the element on re-parse and becomes live markup. Applications that parse untrusted HTML with lazy_html, filter the document or tree, and serialize it for display are affected, since the payload is a plain text node that no element or attribute filter sees.
This issue affects lazy_html: from 0.1.0 before 0.1.13. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Enhance OEM ID and Table ID validation in acpi_ex_load_table_op()
Enhance OEM ID and Table ID validation in acpi_ex_load_table_op() to
prevent buffer overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Fix NULL pointer dereference in acpi_ns_custom_package()
acpi_ns_custom_package() unconditionally dereferences the first element
of the package to read the _BIX version number, without checking for
NULL:
if ((*Elements)->Common.Type != ACPI_TYPE_INTEGER)
When firmware returns a _BIX package whose first element is an
unresolvable reference, ACPICA evaluates that entry to NULL.
acpi_ns_remove_null_elements() does not strip NULL entries for
ACPI_PTYPE_CUSTOM packages (fixed-position format would break if
elements were shifted), so acpi_ns_custom_package() sees the NULL
and causes a crash.
Add a NULL check for the first element (version field) before
dereferencing it. The caller then receives AE_AML_OPERAND_TYPE
instead of crashing. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: add boundary checks in two places
Add boundary checks in acpi_ps_get_next_namestring() and
acpi_ps_peek_opcode() to prevent out-of-bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: preserve non-DOS attribute bits in system.dos_attrib
[BUG]
A corrupted ntfs3 image can hit a NULL function pointer call in
generic_perform_write() after toggling system.ntfs_attrib and then
overwriting system.dos_attrib on the same file.
BUG: kernel NULL pointer dereference, address: 0000000000000000
\#PF: supervisor instruction fetch in kernel mode
\#PF: error_code(0x0010) - not-present page
PGD bed5067 P4D bed5067 PUD 0
Oops: Oops: 0010 [#1] SMP KASAN NOPTI
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffff88801025f988 EFLAGS: 00010246
Call Trace:
generic_perform_write+0x409/0x8c0 mm/filemap.c:4255
__generic_file_write_iter+0x1bb/0x200 mm/filemap.c:4372
ntfs_file_write_iter+0xcd9/0x1c20 fs/ntfs3/file.c:1253
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x63b/0xf70 fs/read_write.c:686
ksys_write+0x133/0x250 fs/read_write.c:738
__do_sys_write fs/read_write.c:749 [inline]
__se_sys_write fs/read_write.c:746 [inline]
__x64_sys_write+0x77/0xc0 fs/read_write.c:746
...
[CAUSE]
system.ntfs_attrib updates ATTR_DATA flags via ni_new_attr_flags()
and switches i_mapping->a_ops to ntfs_aops_cmpr when
FILE_ATTRIBUTE_COMPRESSED is set. system.dos_attrib then overwrites
ni->std_fa from a one-byte DOS attribute value, clearing the compression
bit without updating ATTR_DATA or the mapping operations.
Old buffered writes use is_compressed(ni) to choose
__generic_file_write_iter(). That leaves generic_perform_write() calling
a NULL write_begin callback from ntfs_aops_cmpr.
[FIX]
Treat system.dos_attrib as a low-byte DOS attribute update and preserve the
existing non-DOS attribute bits in ni->std_fa. This keeps compressed and
sparse state consistent with ATTR_DATA and the mapping operations while
keeping the existing DOS attribute semantics intact. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: fix handling of NAPI on the remove path
All the NAPI instances for a DPSW device are attached to the first
switch port's net_device but shared by all ports. The NAPI instances get
disabled only once the last port goes down.
This causes an issue on the .remove() path where each port is
unregistered and freed one at a time, causing the NAPI instances to be
deleted even though they are not disabled.
In order to avoid this, split up the unregister_netdev() calls from the
free_netdev() so that we make sure all ports go down before we attempt
a deletion of NAPI instances. Also, make the netif_napi_del() explicit
as it is on the .probe() path. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix P2P-Device binding handling
Our binding handling for P2P-Device can run into the following
scenario, as observed by our testing:
- a station interface is connected on some channel
- the P2P-Device does a remain-on-channel (ROC) on that channel
- the ROC ends, and the P2P-Device is removed from the binding,
but the phy_ctxt pointer is left around as a PHY cache so we
don't need to recalibrate to the channel again and again in
case it's not shared
- a binding update by the station interface, even a removal,
will re-add the P2P-Device to the binding
- the P2P-Device is removed, which removes the PHY context, but
it's still in the binding so the firmware crashes
Since the P2P device is removed from the binding and only re-
added by unrelated code, but we want to keep the phy_ctxt around
as a cache for future ROC usage, fix it by adding a boolean that
indicates whether or not the P2P-Device should be added to the
binding, and handle that in the binding iterator. That way, the
station interface cannot re-add the P2P-Device to the binding
when that isn't active. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Avoid DPMS-on for phantom stream
[Why & How]
Calling dc_update_planes_and_stream separately for stream and its
phantom stream causes a NULL pointer dereference, since the phantom is
destroyed on the first call.
Skip the call for phantom streams. |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In 5.5.5, 6.0.1, and 6.1, the BlueDroid A2DP sink function btc_a2dp_sink_handle_inc_media() reads a timestamp field from the received media buffer before validating that the packet layout contains the field. A paired BR/EDR audio source within radio range can send a malformed A2DP media packet to a build with BlueDroid Classic Bluetooth and A2DP sink support enabled, causing an out-of-bounds read into adjacent heap memory and limited disclosure of heap contents. Arbitrary memory disclosure and code execution are not established. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix buffer overflow during vBIOS update
Clamp the buffer postion to write by setting the bin attribute
to the maximum buffer size so that VFS layer will block the
out-of-bounds accessing. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix SMI event cross-process information leak
kfd_smi_ev_enabled() skips the suser privilege check when pid=0.
PROCESS_START, PROCESS_END, and VMFAULT events are emitted with
pid=0 while carrying another process's PID and command name, so any
/dev/kfd user in the render group can monitor all GPU workloads.
Pass the target process PID into kfd_smi_event_add() for these events
so the existing per-client filter restricts delivery to the owning
process or CAP_SYS_ADMIN subscribers. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: NUL-terminate replaced sysctl value
When writing to sysctls, proc_sys_call_handler() guarantees that the
buffer passed to proc handlers is NUL-terminated. If
bpf_sysctl_set_new_value() replaces the pending sysctl value, it can
hand a replacement buffer directly to proc handlers. However, the
helper currently copies only buf_len bytes into that buffer without
appending a NUL terminator, leaving downstream parsers vulnerable to
out-of-bounds access.
Fix this by appending a '\0' after the replaced value to restore the
expected sysctl semantics. Since the helper already rejects buf_len
greater than PAGE_SIZE - 1, there is always room for the extra byte.
Reproduced in a QEMU x86_64 guest booted with KASAN while exercising
the sysctl replacement path with a cgroup/sysctl BPF program. The
reproducer targets `/proc/sys/net/core/flow_limit_cpu_bitmap`, fills
the original user write buffer with non-zero bytes, and overrides the
sysctl value so the replacement buffer lacks a terminating NUL. Under
that setup, the pre-fix kernel reported:
BUG: KASAN: slab-out-of-bounds in strnchrnul+0x72/0x90
Read of size 1 at addr ffff88800de57000 by task repro_patch3/66
CPU: 0 UID: 0 PID: 66 Comm: repro_patch3 Not tainted 7.1.0-rc3-00269-g8370ca1f87cc #6 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xa0
print_report+0xcb/0x5e0
? __virt_addr_valid+0x21d/0x3f0
? strnchrnul+0x72/0x90
? strnchrnul+0x72/0x90
kasan_report+0xca/0x100
? strnchrnul+0x72/0x90
strnchrnul+0x72/0x90
bitmap_parse+0x37/0x2e0
flow_limit_cpu_sysctl+0xc6/0x840
? __pfx_flow_limit_cpu_sysctl+0x10/0x10
? __kvmalloc_node_noprof+0x5ba/0x870
proc_sys_call_handler+0x31d/0x480
? __pfx_proc_sys_call_handler+0x10/0x10
? selinux_file_permission+0x39f/0x500
? lock_is_held_type+0x9e/0x120
vfs_write+0x98e/0x1000
...
</TASK>
The buggy address is located 0 bytes to the right of
allocated 4096-byte region [ffff88800de56000, ffff88800de57000)
With this fix applied, rerunning the same sysctl-targeted path yields
no corresponding KASAN reports. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: es18xx: check control allocation before private data setup
snd_es18xx_mixer() creates controls with snd_ctl_new1() and then stores
bookkeeping pointers or sets private_free before calling snd_ctl_add().
snd_ctl_new1() can return NULL on allocation failure, so those writes
can dereference a NULL control pointer.
Check the returned control pointers before using them and return -ENOMEM
on allocation failure. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: balance: fix potential bg lookup failure in btrfs_may_alloc_data_chunk()
[BUG]
Running btrfs balance can trigger a null-ptr-deref before relocating a
data chunk when metadata corruption leaves a chunk in the chunk tree
without a corresponding block group in the in-memory cache:
KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f]
RIP: 0010:btrfs_may_alloc_data_chunk+0x40/0x1c0 fs/btrfs/volumes.c:3601
Call Trace:
__btrfs_balance fs/btrfs/volumes.c:4217 [inline]
btrfs_balance+0x2516/0x42b0 fs/btrfs/volumes.c:4604
btrfs_ioctl_balance fs/btrfs/ioctl.c:3577 [inline]
btrfs_ioctl+0x25cf/0x5b90 fs/btrfs/ioctl.c:5313
...
[CAUSE]
__btrfs_balance() iterates the on-disk chunk tree and passes the chunk
logical bytenr to btrfs_may_alloc_data_chunk() before relocating a data
chunk. That helper then queries the in-memory block group cache:
cache = btrfs_lookup_block_group(fs_info, chunk_offset);
chunk_type = cache->flags; /* cache may be NULL */
A corrupt image can contain a chunk item whose matching block group
item is missing, so no block group is ever inserted into the cache. In
that case btrfs_lookup_block_group() returns NULL.
The code only guards this with ASSERT(cache), which becomes a no-op when
CONFIG_BTRFS_ASSERT is disabled. The subsequent dereference of
cache->flags therefore crashes the kernel.
[FIX]
Add a NULL check after btrfs_lookup_block_group() in
btrfs_may_alloc_data_chunk() and print and error message for clarity. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8365-afe-pcm: fix possible NULL-pointer dereferences in mt8365_afe_suspend()
mt8365_afe_suspend() allocates the register backup buffer with
devm_kcalloc(), but does not check for allocation failure before using the
returned pointer. This may lead to a NULL pointer dereference when
accessing afe->reg_back_up[i].
Add the missing NULL check and return -ENOMEM on allocation failure after
disabling the main clock.
Also propagate the return value of mt8365_afe_suspend() in
mt8365_afe_dev_runtime_suspend() so that the suspended state is not updated
when suspend fails. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: validate connectionless PSM length
Connectionless L2CAP frames carry a two-byte PSM at the start of the
payload. l2cap_recv_frame() currently reads that PSM unconditionally
after validating only the outer L2CAP length.
A malformed connectionless frame with a zero- or one-byte payload can
therefore make the parser read beyond the advertised skb payload and use
tailroom bytes as part of the PSM. A VHCI-backed QEMU reproducer
injected a one-byte connectionless payload and reached the unchecked
read.
Reject connectionless frames that cannot contain the PSM before reading
or pulling it. This preserves all valid connectionless frames while
dropping only structurally incomplete packets. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: Add NULL check for spi_get_device_id() in spi_get_device_match_data()
Prevent NULL pointer dereference when spi_get_device_id() returns NULL,
which can happen when using driver_override without matching SPI ID entry. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: reject the combination of TLS and sockmap
TLS and sockmap (BPF psock) integration hides a lot of latent bugs.
Bugs which may be more or less relevant for real users but they
are definitely exploitable.
We could not find anyone actively using this integration so let's
reject this config. Adding a TLS socket to a sockmap was already
rejected by sk_psock_init() through the inet_csk_has_ulp() check.
We need to reject the attempts to configure the TLS keys (rather
than adding the ULP itself) because checking prior to the ULP
installation is tricky without risking a race with sockmap getting
added in parallel (sockmap does not hold the socket lock).
This patch is a minimal rejection of the feature. Subsequent patch
in the series will do a light dead code removal. Full cleanup would
require a major rewrite of the Tx path, we don't need skmsg any more. |
