| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: rework FDB management on the bridge leave path
On bridge leave, the dpaa2_switch_port_set_fdb() function always
allocates a new FDB for the port which is becoming standalone. In case
no FDB is found, then the port leaving a bridge will continue to use the
current one.
The above logic does not cover the case in which there are multiple
bridges which have ports from the same DPSW instance. In this case, when
the last port leaves bridge #1, it finds an unused FDB to switch to, but
the old FDB is not marked as unused. Since the number of FDBs is equal
to the number of DPSW interfaces, this will eventually lead to multiple
ports sharing the same FDB.
Fix this by changing how we are managing the FDBs on the leave path.
Instead of directly allocating a new FDB, first verify if the current
port is the last one to leave a bridge. If this is the case, then
continue to use the current FDB and only allocate another FDB if there
are other ports remaining in the bridge. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: sja1105: flower: reject cross-chip redirect
dsa_port_from_netdev() may return a valid port from a different switch
chip. Programming another chip's port index into the local hardware
causes redirection to the wrong port, or an out-of-bounds access if the
index exceeds the local chip's port count.
Apply a minimal fix that adds a check to catch this case and adjusts the
extack message. When cls->common.skip_sw is not set, the operation could
instead redirect to the upstream port and let the software or upstream
switch(es) handle the forward, but that is not addressed here. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: fix handling of NAPI on the remove path
All the NAPI instances for a DPSW device are attached to the first
switch port's net_device but shared by all ports. The NAPI instances get
disabled only once the last port goes down.
This causes an issue on the .remove() path where each port is
unregistered and freed one at a time, causing the NAPI instances to be
deleted even though they are not disabled.
In order to avoid this, split up the unregister_netdev() calls from the
free_netdev() so that we make sure all ports go down before we attempt
a deletion of NAPI instances. Also, make the netif_napi_del() explicit
as it is on the .probe() path. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix P2P-Device binding handling
Our binding handling for P2P-Device can run into the following
scenario, as observed by our testing:
- a station interface is connected on some channel
- the P2P-Device does a remain-on-channel (ROC) on that channel
- the ROC ends, and the P2P-Device is removed from the binding,
but the phy_ctxt pointer is left around as a PHY cache so we
don't need to recalibrate to the channel again and again in
case it's not shared
- a binding update by the station interface, even a removal,
will re-add the P2P-Device to the binding
- the P2P-Device is removed, which removes the PHY context, but
it's still in the binding so the firmware crashes
Since the P2P device is removed from the binding and only re-
added by unrelated code, but we want to keep the phy_ctxt around
as a cache for future ROC usage, fix it by adding a boolean that
indicates whether or not the P2P-Device should be added to the
binding, and handle that in the binding iterator. That way, the
station interface cannot re-add the P2P-Device to the binding
when that isn't active. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Avoid DPMS-on for phantom stream
[Why & How]
Calling dc_update_planes_and_stream separately for stream and its
phantom stream causes a NULL pointer dereference, since the phantom is
destroyed on the first call.
Skip the call for phantom streams. |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: Prevent queuing new commands if xhci is inaccessible
Refuse to queue a new command on the command ring if xHC is marked
inaccessible with the HCD_FLAG_HW_ACCESSIBLE.
HCD_FLAG_HW_ACCESSIBLE is set and cleared in suspend and resume.
Also print a warning if xhci is being suspended with commands
still pending on the command ring. |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In 5.5.5, 6.0.1, and 6.1, the BlueDroid A2DP sink function btc_a2dp_sink_handle_inc_media() reads a timestamp field from the received media buffer before validating that the packet layout contains the field. A paired BR/EDR audio source within radio range can send a malformed A2DP media packet to a build with BlueDroid Classic Bluetooth and A2DP sink support enabled, causing an out-of-bounds read into adjacent heap memory and limited disclosure of heap contents. Arbitrary memory disclosure and code execution are not established. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix buffer overflow during vBIOS update
Clamp the buffer postion to write by setting the bin attribute
to the maximum buffer size so that VFS layer will block the
out-of-bounds accessing. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix SMI event cross-process information leak
kfd_smi_ev_enabled() skips the suser privilege check when pid=0.
PROCESS_START, PROCESS_END, and VMFAULT events are emitted with
pid=0 while carrying another process's PID and command name, so any
/dev/kfd user in the render group can monitor all GPU workloads.
Pass the target process PID into kfd_smi_event_add() for these events
so the existing per-client filter restricts delivery to the owning
process or CAP_SYS_ADMIN subscribers. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: NUL-terminate replaced sysctl value
When writing to sysctls, proc_sys_call_handler() guarantees that the
buffer passed to proc handlers is NUL-terminated. If
bpf_sysctl_set_new_value() replaces the pending sysctl value, it can
hand a replacement buffer directly to proc handlers. However, the
helper currently copies only buf_len bytes into that buffer without
appending a NUL terminator, leaving downstream parsers vulnerable to
out-of-bounds access.
Fix this by appending a '\0' after the replaced value to restore the
expected sysctl semantics. Since the helper already rejects buf_len
greater than PAGE_SIZE - 1, there is always room for the extra byte.
Reproduced in a QEMU x86_64 guest booted with KASAN while exercising
the sysctl replacement path with a cgroup/sysctl BPF program. The
reproducer targets `/proc/sys/net/core/flow_limit_cpu_bitmap`, fills
the original user write buffer with non-zero bytes, and overrides the
sysctl value so the replacement buffer lacks a terminating NUL. Under
that setup, the pre-fix kernel reported:
BUG: KASAN: slab-out-of-bounds in strnchrnul+0x72/0x90
Read of size 1 at addr ffff88800de57000 by task repro_patch3/66
CPU: 0 UID: 0 PID: 66 Comm: repro_patch3 Not tainted 7.1.0-rc3-00269-g8370ca1f87cc #6 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xa0
print_report+0xcb/0x5e0
? __virt_addr_valid+0x21d/0x3f0
? strnchrnul+0x72/0x90
? strnchrnul+0x72/0x90
kasan_report+0xca/0x100
? strnchrnul+0x72/0x90
strnchrnul+0x72/0x90
bitmap_parse+0x37/0x2e0
flow_limit_cpu_sysctl+0xc6/0x840
? __pfx_flow_limit_cpu_sysctl+0x10/0x10
? __kvmalloc_node_noprof+0x5ba/0x870
proc_sys_call_handler+0x31d/0x480
? __pfx_proc_sys_call_handler+0x10/0x10
? selinux_file_permission+0x39f/0x500
? lock_is_held_type+0x9e/0x120
vfs_write+0x98e/0x1000
...
</TASK>
The buggy address is located 0 bytes to the right of
allocated 4096-byte region [ffff88800de56000, ffff88800de57000)
With this fix applied, rerunning the same sysctl-targeted path yields
no corresponding KASAN reports. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: es18xx: check control allocation before private data setup
snd_es18xx_mixer() creates controls with snd_ctl_new1() and then stores
bookkeeping pointers or sets private_free before calling snd_ctl_add().
snd_ctl_new1() can return NULL on allocation failure, so those writes
can dereference a NULL control pointer.
Check the returned control pointers before using them and return -ENOMEM
on allocation failure. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: balance: fix potential bg lookup failure in btrfs_may_alloc_data_chunk()
[BUG]
Running btrfs balance can trigger a null-ptr-deref before relocating a
data chunk when metadata corruption leaves a chunk in the chunk tree
without a corresponding block group in the in-memory cache:
KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f]
RIP: 0010:btrfs_may_alloc_data_chunk+0x40/0x1c0 fs/btrfs/volumes.c:3601
Call Trace:
__btrfs_balance fs/btrfs/volumes.c:4217 [inline]
btrfs_balance+0x2516/0x42b0 fs/btrfs/volumes.c:4604
btrfs_ioctl_balance fs/btrfs/ioctl.c:3577 [inline]
btrfs_ioctl+0x25cf/0x5b90 fs/btrfs/ioctl.c:5313
...
[CAUSE]
__btrfs_balance() iterates the on-disk chunk tree and passes the chunk
logical bytenr to btrfs_may_alloc_data_chunk() before relocating a data
chunk. That helper then queries the in-memory block group cache:
cache = btrfs_lookup_block_group(fs_info, chunk_offset);
chunk_type = cache->flags; /* cache may be NULL */
A corrupt image can contain a chunk item whose matching block group
item is missing, so no block group is ever inserted into the cache. In
that case btrfs_lookup_block_group() returns NULL.
The code only guards this with ASSERT(cache), which becomes a no-op when
CONFIG_BTRFS_ASSERT is disabled. The subsequent dereference of
cache->flags therefore crashes the kernel.
[FIX]
Add a NULL check after btrfs_lookup_block_group() in
btrfs_may_alloc_data_chunk() and print and error message for clarity. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8365-afe-pcm: fix possible NULL-pointer dereferences in mt8365_afe_suspend()
mt8365_afe_suspend() allocates the register backup buffer with
devm_kcalloc(), but does not check for allocation failure before using the
returned pointer. This may lead to a NULL pointer dereference when
accessing afe->reg_back_up[i].
Add the missing NULL check and return -ENOMEM on allocation failure after
disabling the main clock.
Also propagate the return value of mt8365_afe_suspend() in
mt8365_afe_dev_runtime_suspend() so that the suspended state is not updated
when suspend fails. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ibm: emac: mal: fix potential system hang in mal_remove()
napi_disable() is not idempotent and calling it on an already-disabled
or unenabled NAPI context will cause the kernel to spin indefinitely
waiting for the NAPI_STATE_SCHED bit to clear.
In mal_remove(), napi_disable() is called unconditionally. If no MACs were
registered, NAPI was never enabled. Also, if they were registered but
subsequently unregistered, NAPI was already disabled in
mal_unregister_commac(). In either case, calling napi_disable() causes
the kernel to hang upon module removal.
Fix this by only calling napi_disable() in mal_remove() if the commac list
is not empty (which implies NAPI is enabled). |
| In the Linux kernel, the following vulnerability has been resolved:
netconsole: take target_cleanup_list_lock in drop_netconsole_target()
drop_netconsole_target() unlinks the target while only holding
target_list_lock. However, when the underlying interface has been
unregistered, netconsole_netdev_event() moves the target from
target_list to target_cleanup_list, and netconsole_process_cleanups_core()
walks that list under target_cleanup_list_lock only.
If a user removes the configfs target at the same time the cleanup
worker is iterating target_cleanup_list, list_del() can corrupt the list
because the two paths take disjoint locks while operating on the same
list node.
Acquire target_cleanup_list_lock around the list_del() so the unlink is
serialised against netconsole_process_cleanups_core() regardless of
which list the target currently belongs to. The state transition that
downgrades STATE_DEACTIVATED to STATE_DISABLED is left intact and is
performed under the same combined locking, preserving the existing
ordering with resume_target(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: validate connectionless PSM length
Connectionless L2CAP frames carry a two-byte PSM at the start of the
payload. l2cap_recv_frame() currently reads that PSM unconditionally
after validating only the outer L2CAP length.
A malformed connectionless frame with a zero- or one-byte payload can
therefore make the parser read beyond the advertised skb payload and use
tailroom bytes as part of the PSM. A VHCI-backed QEMU reproducer
injected a one-byte connectionless payload and reached the unchecked
read.
Reject connectionless frames that cannot contain the PSM before reading
or pulling it. This preserves all valid connectionless frames while
dropping only structurally incomplete packets. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: rockchip: rockchip_pdm: Handle runtime PM resume failures in set_fmt
rockchip_pdm_set_fmt() calls pm_runtime_get_sync() before accessing
hardware registers, but ignores its return value.
If the runtime resume fails, the function continues to perform register
accesses while the device state is undefined.
Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() and
return early on failure to avoid unpowered register accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix handling of damaged volume in exfat_create_upcase_table()
When the size of the upcase table is set to zero in the dentry for any
reason(e.g. corrupted media or misbehaving device), an integer overflow
causes the module to loop indefinitely.
If the size of the upcase table is read zero, do not attempt to load the
table. Instead, fallback to loading the default upcase table. If the
size of the upcase table is zero or no upcase table is found, raise
exfat_fs_error() to mark the volume read-only. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hidpp: fix potential UAF in hidpp_connect_event()
If input_register_device() fails, we call input_free_device(), but keep
stale pointer to the old device in hidpp->input, which could potentially
lead to UAF. Fix that by resetting it to NULL before returning from
hidpp_connect_event(). |
| In the Linux kernel, the following vulnerability has been resolved:
spi: Add NULL check for spi_get_device_id() in spi_get_device_match_data()
Prevent NULL pointer dereference when spi_get_device_id() returns NULL,
which can happen when using driver_override without matching SPI ID entry. |
