| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: fix urb->setup_packet leak in error paths
The setup_packet of control urb is not freed if usb_submit_urb fails or
the submitted urb is killed. Add free in these two paths. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix dma_buffer leak on bus acquire failure
wilc_wlan_firmware_download() allocates dma_buffer with kmalloc() at
the top of the function and uses a 'fail:' label to free it via
kfree(dma_buffer) on error.
All later error paths correctly use 'goto fail' to route through this
cleanup. However, the early failure path after the first acquire_bus()
call uses a bare 'return ret;', which leaks dma_buffer whenever the bus
acquire fails.
Replace the early return with goto fail so the existing cleanup path
runs.
Found via a custom Coccinelle semantic patch hunting for kmalloc'd
locals leaked on early-return error paths in driver firmware-download
code. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix debugfs_lookup dentry leak and error handling
debugfs_lookup() returns a dentry with an elevated reference count that
must be released with dput(). The current code discards the returned
dentry without calling dput(), causing a reference leak on every
firmware reset recovery.
Additionally, when CONFIG_DEBUG_FS is disabled, debugfs_lookup()
returns ERR_PTR(-ENODEV), not NULL. The current check passes for error
pointers and would call dput() on an invalid pointer, causing a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvneta: re-enable percpu interrupt on resume
On Marvell MPIC platforms (Armada 370/XP/38x), mvneta uses a percpu
IRQ disable/enable scheme for NAPI: the ISR (mvneta_percpu_isr) calls
disable_percpu_irq() to mask the MPIC per-CPU interrupt and schedules
NAPI poll, which calls enable_percpu_irq() on completion to unmask.
If suspend occurs while NAPI poll is pending (between
disable_percpu_irq in the ISR and enable_percpu_irq in poll
completion), the interrupt is never re-enabled:
1. mvneta_percpu_isr: disable_percpu_irq() + napi_schedule()
=> MPIC masked, percpu_enabled cpumask bit cleared
2. NAPI poll does not complete before suspend proceeds
(on PREEMPT_RT this is highly likely since softirqs run in
ksoftirqd which gets frozen; on non-RT it can happen when
softirq processing is deferred to ksoftirqd)
3. mvneta_stop_dev => napi_disable(): cancels the pending poll
without executing the completion path
4. suspend_device_irqs => IRQCHIP_MASK_ON_SUSPEND: masks MPIC
(already masked, but records IRQS_SUSPENDED)
5. Resume: mpic_resume checks irq_percpu_is_enabled() => false
(bit was cleared in step 1) => skips unmask
6. mvneta_start_dev only restores device-level INTR_NEW_MASK,
does not touch the MPIC per-CPU mask
Result: MPIC per-CPU interrupt stays masked permanently. The NIC
generates interrupts (INTR_NEW_CAUSE != 0) but the CPU never
receives them, causing complete loss of network connectivity.
Fix by calling on_each_cpu(mvneta_percpu_enable) in the resume path
to unconditionally unmask the MPIC per-CPU interrupt regardless of
pre-suspend state. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix FDIR CTRL VSI resource leak in ice_reset_all_vfs()
Resetting all VFs causes resource leak on VFs with FDIR filters
enabled as CTRL VSIs are only invalidated and not freed. Fix by using
ice_vf_ctrl_vsi_release() instead of ice_vf_ctrl_invalidate_vsi() which
aligns behavior with the ice_reset_vf() function.
Reproduction:
echo 1 > /sys/class/net/$pf/device/sriov_numvfs
ethtool -N $vf flow-type ether proto 0x9000 action 0
echo 1 > /sys/class/net/$pf/device/reset |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix error path leaks in some WMI WOW calls
Fix two instances where we used to directly return the result of
ath11k_wmi_cmd_send(...). Because we did not check the return value, we
also did not free the skb in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: fix URB leak in alloc_mtk_intr_urb error path
When btmtk_isopkt_pad() fails, the previously allocated URB is not freed,
leaking the urb structure. Add usb_free_urb() before returning the error. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix FRMR set pinned push error path
Add destruction of FRMR handles in case the push to the pool fails.
This prevents resources leak in case pool page allocation fails. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1: free r1_bio when REQ_NOWAIT is set and read would block on retry
When a read is retried, raid1_read_request() may be called with a
pre-allocated r1_bio. If wait_read_barrier() fails for a REQ_NOWAIT
read, the bio is completed and the function returns immediately. In this
case the existing r1_bio is leaked.
This fixes a leak of pre-allocated r1_bio structures for retried reads. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix a leak when a group is evicted before the tiler OOM is serviced
A group ref is tied to the pending tiler_oom_work, so we need to release
it if the cancel was effective. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: hecubafb: fix potential memory leak in hecubafb_probe()
The memory allocated for pagerefs in fb_deferred_io_init() is not freed
on the error path. Fix it by calling fb_deferred_io_cleanup(). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: efifb: fix memory leak in efifb_probe()
Since commit 73ce73c30ba9 ("fbdev: Transfer video= option strings to
caller; clarify ownership") the string returned from fb_get_options()
is expected to be freed by the caller, but the string is not freed in
efifb_probe(). Fix that by freeing the option string after setup. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: tdfxfb: fix potential memory leak in tdfxfb_probe()
In tdfxfb_probe(), the memory allocated for modelist using
fb_videomode_to_modelist() when CONFIG_FB_3DFX_I2C is defined, is not
freed in the subsequent error paths.
Fix that by calling fb_destroy_modelist(). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: carminefb: fix potential memory leak in alloc_carmine_fb()
The memory allocated for modelist in fb_videomode_to_modelist() is not
freed in the subsequent error path.
Fix that by calling fb_destroy_modelist() |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: vesafb: fix memory leak in vesafb_probe()
Since commit 73ce73c30ba9 ("fbdev: Transfer video= option strings to
caller; clarify ownership") the string returned from fb_get_options()
is expected to be freed by the caller. But the string is not freed in
vesafb_probe(). Fix that by freeing the option string after setup. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8183: Release reserved memory on cleanup
The MT8183 AFE probe can assign reserved memory with
of_reserved_mem_device_init(), but the assignment is never released on
driver removal or later probe failures.
Register a devm cleanup action so the reserved memory assignment is
released consistently, matching newer Mediatek AFE drivers. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: cpcap-battery: Fix missing nvmem_device_put() causing reference leak
In cpcap_battery_detect_battery_type(), the reference to an nvmem
device obtained via nvmem_device_find() is not released with
nvmem_device_put() on the success or read-failure paths, causing a
permanent reference leak. The driver’s retry logic on subsequent
battery property reads can compound this leak, preventing the nvmem
device from ever being freed.
Found by code review. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix hole runlist memory leak in insert range error path
ntfs_non_resident_attr_insert_range() allocates hole_rl before mapping the
whole runlist. If ntfs_attr_map_whole_runlist() fails, the error path drops
ni->runlist.lock and returns without freeing hole_rl. This leaks memory
of sizeof(*hole_rl) * 2 bytes.
Fix this memory leak by freeing hole_rl before returning from
that error path, matching the later error paths in the same function. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: cacheinfo: Fix node reference leak in populate_cache_leaves
Currently, the while loop drops the reference to prev in each iteration.
If the loop terminates early due to a break, the final of_node_put(np)
correctly drops the reference to the current node.
However, if the loop terminates naturally because np == NULL, calling
of_node_put(np) is a no-op. This leaves the last valid node stored in
prev without its reference dropped, resulting in a node reference leak.
Fix this by changing the final `of_node_put(np)` to `of_node_put(prev)`. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: always put unsuccessfully committed target pids
damon_commit_target() puts and gets the destination and the source target
pids. It puts the destination target pid because it will be overwritten
by the source target pid. It gets the source pid because the caller is
supposed to eventually put the pids. In more detail, the caller will call
damon_destroy_ctx() after damon_commit_ctx() to destroy the entire source
context. And in this case, [f]vaddr operation set's cleanup_target()
callback will put the pids.
The commit operation is made at the context level. The operation can fail
in multiple places including in the middle and after the targets commit
operations. For any such failures, immediately the error is returned to
the damon_commit_ctx() caller. If some or all of the source target pids
were committed to the destination during the unsuccessful context commit
attempt, those pids should be put twice.
The source context will do the put operations using the above explained
routine. However, let's suppose the destination context was not
originally using [f]vaddr operation set and the commit failed before the
ops of the source context is committed. The destination does not have the
cleanup_target() ops callback, so it cannot put the pids via the
damon_destroy_ctx().
As a result, the pids are leaked. The issue in the real world would be
not very common. The commit feature is for changing parameters of running
DAMON context while inheriting internal status like the monitoring
results. The monitoring results of a physical address range ain't have
things that are beneficial to be inherited to a virtual address ranges
monitoring. So the problem-causing DAMON control would be not very common
in the real world. That said, it is a supported feature. And
damon_commit_target() failure due to memory allocation is relatively
realistic [1] if there are a huge number of target regions.
Fix by putting the pids in the commit operation in case of the failures.
The issue was discovered [2] by Sashiko. |
