| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_counter: serialize reset with spinlock
Add a global static spinlock to serialize counter fetch+reset
operations, preventing concurrent dump-and-reset from underrunning
values.
The lock is taken before fetching the total so that two parallel
resets cannot both read the same counter values and then both
subtract them.
A global lock is used for simplicity since resets are infrequent.
If this becomes a bottleneck, it can be replaced with a per-net
lock later. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Take the SRCU lock for page table walks in fault injection and AT emulation
walk_s1() and kvm_walk_nested_s2() expect to be called while holding
kvm->srcu to guard against memslot changes. While this is generally
the case, __kvm_at_s12() and __kvm_find_s1_desc_level() call into the
respective walkers without taking kvm->srcu.
Fix by acquiring kvm->srcu prior to the table walk in both instances. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Make RX SKB per-port
The SKB used to assemble packets from fragments in gmac_rx()
is static local, but the Gemini has two ethernet ports, meaning
there can be races between the ports on a bad day if a device
is using both.
Make the RX SKB a per-port variable and carry it over between
invocations in the port struct instead.
Zero the pointer once we call napi_gro_frags(), on error (after
calling napi_free_frags()) or if the port is stopped.
Zero it in some place where not strictly necessary just to
emphasize what is going on.
This was found by Sashiko during normal patch review. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/list_lru: drain before clearing xarray entry on reparent
memcg_reparent_list_lrus() clears the dying memcg's xarray entry with
xas_store(&xas, NULL) before reparenting its per-node lists into the
parent. This opens a window where a concurrent list_lru_del() arriving
for the dying memcg sees xa_load() == NULL, walks to the parent in
lock_list_lru_of_memcg(), takes the parent's per-node lock, and calls
list_del_init() on an item still physically linked on the dying memcg's
list.
If another in-flight thread holds the dying memcg's per-node lock at the
same moment (another list_lru_del, or a list_lru_walk_one running an
isolate callback), both threads modify ->next/->prev pointers on the same
physical list under different locks. Adjacent items can corrupt each
other's links.
Fix it by reversing the order: reparent each per-node list and mark the
child's list lru dead and then clear the xarray entry. Any concurrent
list_lru op that finds the still-set xarray entry either takes the dying
memcg's per-node lock (synchronizing with the drain) or sees LONG_MIN and
walks to the parent, where the items now live. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: ete: Always save state on power down
System register ETMs and ETE are unlikely to be preserved on CPU power
down. The ETE DT binding also never documented
"arm,coresight-loses-context-with-cpu" so nobody would have legitimately
been able to use that binding to fix it and ACPI has no such binding at
all.
Fix it by hard coding the setting for sysreg ETMs (ETE is always sysreg)
or ACPI boots. Use a local variable when setting up save_state so that
it's immune to concurrent probing when devices have different
configurations which is an issue with modifying the global.
This fixes the following error when using Coresight with ACPI on the FVP
which supports CPU PM:
coresight ete0: External agent took claim tag
WARNING: drivers/hwtracing/coresight/coresight-core.c:248 at coresight_disclaim_device_unlocked+0xe0/0xe8, CPU#0: perf/117 |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor_idle: Mark LPI enter functions as __cpuidle
When function tracing or Kprobes is enabled, entering an ACPI Low
Power Idle (LPI) state triggers the following RCU splat:
RCU not on for: acpi_idle_lpi_enter+0x4/0xd8
WARNING: CPU: 8 PID: 0 at include/linux/trace_recursion.h:162 function_trace_call+0x1e8/0x228
The acpi_idle_lpi_enter() function is invoked within the cpuidle
path after RCU has already been disabled for the current local CPU.
Consequently, ftrace's function_trace_call() expects RCU to be
actively watching before recording trace data, emitting a warning
if it is not.
Fix this by annotating acpi_idle_lpi_enter(), the generic __weak
stub, and the RISC-V implementation of acpi_processor_ffh_lpi_enter()
with __cpuidle. This moves these functions into the '.cpuidle.text'
section, implicitly disabling ftrace instrumentation (notrace) along
this sensitive path and preventing trace-induced RCU warnings during
idle entry. |
| OpenTelemetry-Go is the Go implementation of OpenTelemetry. From version 0.11.0 through 1.44.0, the OpenTracing bridge's bridgeSpan contains an unsynchronized extraBaggageItems map which can cause a panic. Because Go maps are not safe for concurrent read/write access, concurrent SetBaggageItem and correlation.MapFromContext calls on the same hooked bridgeSpan can trigger a fatal runtime error—such as concurrent map read and map write or concurrent map iteration and map write—terminating the process and causing denial of service. This issue is fixed in version 1.45.0. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: read virtqueues under worker locks
Commit bd50c5dc182b ("vsock/virtio: add support for device
suspend/resume") made the *_run flags transition from false to true when
restore installs replacement virtqueues. The RX, TX and event workers
read their virtqueue before locking and checking the corresponding flag,
so a worker delayed across freeze and restore can observe the replacement
queue's running state while retaining a pointer to the deleted queue.
Read each virtqueue under its mutex after checking the run flag, keeping
the pointer and state in the same queue generation. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Add spinlock to protect DONE_INT_MASK and ABORT_INT_MASK
The DONE_INT_MASK and ABORT_INT_MASK registers are shared by all DMA
channels, and modifying them requires a read-modify-write sequence.
Because this operation is not atomic, concurrent calls to
dw_edma_v0_core_start() can introduce race conditions if two channels
update these registers simultaneously.
Add a spinlock to serialize access to these registers and prevent race
conditions.
[den: update dw_edma.lock comment] |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Add global mutex to serialize trace_parser access
In ftrace, the trace_parser structure is allocated and initialized when
a trace file is opened, and is subsequently used across write and release
handlers to parse user input.
The affected handler paths and their specific functions are:
- Open paths: ftrace_regex_open(), ftrace_graph_open()
- Write paths: ftrace_regex_write(), ftrace_graph_write()
- Release paths: ftrace_regex_release(), ftrace_graph_release()
If userspace opens a trace file descriptor and shares it across multiple
threads, concurrent write calls will race on the parser's internal state,
specifically the 'idx', 'cont', and 'buffer' fields, leading to corrupted
input or undefined behavior.
Fix this by adding a global mutex, parser_lock, to serialize all access
to trace_parser across write and release paths, preventing concurrent
corruption of parser state. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler()
For an rx op subscribed on all interfaces (ifindex == 0), the same op
is registered once in the shared per-netns wildcard filter list, so
bcm_rx_handler() can run concurrently on different CPUs for frames
arriving on different net devices.
op->rx_stamp and op->rx_ifindex were written before bcm_rx_update_lock was
taken, allowing concurrent writers to race each other - including a torn
store of the 64-bit rx_stamp on 32-bit platforms.
Beyond a torn store bcm_send_to_user() must report the timestamp/ifindex
of the very same frame whose content it is delivering. So the assignment
is placed in the same unbroken bcm_rx_update_lock section as the content
comparison.
As a side effect, the RTR-request frame feature (which never reach
bcm_send_to_user()) no longer updates rx_stamp/rx_ifindex, since only
the notification path needs them. |
| LightFTP through 2.4 contains multiple data race vulnerabilities in ftpserv.c that allow anonymous attackers to cause undefined behavior by issuing LIST followed by ABOR commands without authentication. The control thread closes data_socket and file_fd descriptors while worker threads concurrently operate on the same fields in worker_thread_cleanup, allowing stale file descriptors to be reassigned by the OS and subsequently used by worker threads on unrelated resources, resulting in potential denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx-lpi2c: mark I2C adapter when hardware is powered down
On some i.MX platforms, certain I2C client drivers keep a periodic
workqueue which continues to trigger I2C transfers.
During system suspend/resume, there exists a time window between:
- suspend_noirq and the system entering suspend
- the system starting to resume and resume_noirq
In this window, the I2C controller resources such as clock and pinctrl
may already be disabled or not yet restored.
If a workqueue triggers an I2C transfer in this period, the driver
attempts to access I2C registers while the hardware resources are
unavailable, which may lead to system hang.
Mark the I2C adapter as suspended during noirq suspend and block new
transfers until resume, ensuring that I2C transfers are only issued
when hardware resources are available. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (lm90) Add lock protection to lm90_alert
Sashiko reports:
lm90_alert() executes in the smbus alert context and calls
lm90_update_confreg() to disable the hardware alert line, without
acquiring hwmon_lock.
Concurrently, sysfs write operations (such as lm90_write_convrate) hold
the hwmon_lock, temporarily modify data->config, and then restore it.
If an alert interrupt occurs concurrently with a sysfs write, the sysfs
path will overwrite the alert handler's modifications to data->config
and the hardware register.
This unintentionally re-enables the hardware alert line while the alarm is
still active, causing an interrupt storm.
Add the missing lock to lm90_alert() to solve the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx: xdma: Fix data synchronisation in xdma_channel_isr()
Requests the vchan lock before using xdma->stop_request. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: fix stuck flows on cleanup due to pending work
To clear the flow table on flow table free, the following sequence
normally happens in order:
1) gc_step work is stopped to disable any further stats/del requests.
2) All flow table entries are set to teardown state.
3) Run gc_step which will queue HW del work for each flow table entry.
4) Waiting for the above del work to finish (flush).
5) Run gc_step again, deleting all entries from the flow table.
6) Flow table is freed.
But if a flow table entry already has pending HW stats or HW add work
step 3 will not queue HW del work (it will be skipped), step 4 will wait
for the pending add/stats to finish, and step 5 will queue HW del work
which might execute after freeing of the flow table.
To fix the above, this patch flushes the pending work, then it sets the
teardown flag to all flows in the flowtable and it forces a garbage
collector run to queue work to remove the flows from hardware, then it
flushes this new pending work and (finally) it forces another garbage
collector run to remove the entry from the software flowtable.
Stack trace:
[47773.882335] BUG: KASAN: use-after-free in down_read+0x99/0x460
[47773.883634] Write of size 8 at addr ffff888103b45aa8 by task kworker/u20:6/543704
[47773.885634] CPU: 3 PID: 543704 Comm: kworker/u20:6 Not tainted 5.12.0-rc7+ #2
[47773.886745] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
[47773.888438] Workqueue: nf_ft_offload_del flow_offload_work_handler [nf_flow_table]
[47773.889727] Call Trace:
[47773.890214] dump_stack+0xbb/0x107
[47773.890818] print_address_description.constprop.0+0x18/0x140
[47773.892990] kasan_report.cold+0x7c/0xd8
[47773.894459] kasan_check_range+0x145/0x1a0
[47773.895174] down_read+0x99/0x460
[47773.899706] nf_flow_offload_tuple+0x24f/0x3c0 [nf_flow_table]
[47773.907137] flow_offload_work_handler+0x72d/0xbe0 [nf_flow_table]
[47773.913372] process_one_work+0x8ac/0x14e0
[47773.921325]
[47773.921325] Allocated by task 592159:
[47773.922031] kasan_save_stack+0x1b/0x40
[47773.922730] __kasan_kmalloc+0x7a/0x90
[47773.923411] tcf_ct_flow_table_get+0x3cb/0x1230 [act_ct]
[47773.924363] tcf_ct_init+0x71c/0x1156 [act_ct]
[47773.925207] tcf_action_init_1+0x45b/0x700
[47773.925987] tcf_action_init+0x453/0x6b0
[47773.926692] tcf_exts_validate+0x3d0/0x600
[47773.927419] fl_change+0x757/0x4a51 [cls_flower]
[47773.928227] tc_new_tfilter+0x89a/0x2070
[47773.936652]
[47773.936652] Freed by task 543704:
[47773.937303] kasan_save_stack+0x1b/0x40
[47773.938039] kasan_set_track+0x1c/0x30
[47773.938731] kasan_set_free_info+0x20/0x30
[47773.939467] __kasan_slab_free+0xe7/0x120
[47773.940194] slab_free_freelist_hook+0x86/0x190
[47773.941038] kfree+0xce/0x3a0
[47773.941644] tcf_ct_flow_table_cleanup_work
Original patch description and stack trace by Paul Blakey. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix data-race on iso_pi fields in hci_get_route calls
iso_connect_bis(), iso_connect_cis(), iso_listen_bis(), and
iso_conn_big_sync() call hci_get_route() using iso_pi(sk)->dst,
iso_pi(sk)->src, and iso_pi(sk)->src_type without holding lock_sock().
These fields may be modified concurrently by connect() or setsockopt()
on the same socket, resulting in data-races reported by KCSAN.
Fix this by snapshotting the required fields under lock_sock() before
calling hci_get_route().
BUG: KCSAN: data-race in memcmp+0x45/0xb0
race at unknown origin, with read to 0xffff8880122135cf of 1 bytes
by task 333 on cpu 1:
memcmp+0x45/0xb0
hci_get_route+0x27e/0x490
iso_connect_cis+0x4c/0xa10
iso_sock_connect+0x60e/0xb30
__sys_connect_file+0xbd/0xe0
__sys_connect+0xe0/0x110
__x64_sys_connect+0x40/0x50
x64_sys_call+0xcad/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Block PASID attachment to nested domain with dirty tracking
Kernel lacks dirty tracking support on nested domain attached to PASID,
fails the attachment early if nesting parent domain is dirty tracking
configured, otherwise dirty pages would be lost. |
| A Missing Synchronization vulnerability in the flow collector handler of Juniper Networks Junos OS Evolved on QFX Series allows an adjacent, unauthenticated attacker to cause a Denial-of-Service (DoS).
When the reachability of an sFlow collector changes, the corresponding next-hop entry is updated. If this update occurs simultaneously with the sFlow thread accessing the next-hop data (which is outside the attackers control), it causes the evo-pfemand process to crash, impacting all traffic forwarding until the automatic process restart has completed.
This issue affects Junos OS Evolved on QFX Series:
* all 23.2 versions,
* 23.4 versions before 23.4R2-S7-EVO,
* 24.2 versions before 24.2R2-S5-EVO,
* 24.4 versions before 24.4R2-S3-EVO,
* 25.2 versions before 25.2R2-EVO. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix RCU stall in bpf_fd_array_map_clear()
Add a missing cond_resched() in bpf_fd_array_map_clear() loop.
For PROG_ARRAY maps with many entries this loop calls
prog_array_map_poke_run() per entry which can be expensive, and
without yielding this can cause RCU stalls under load:
rcu: Stack dump where RCU GP kthread last ran:
CPU: 0 UID: 0 PID: 30932 Comm: kworker/0:2 Not tainted 6.14.0-13195-g967e8def1100 #2 PREEMPT(undef)
Workqueue: events prog_array_map_clear_deferred
RIP: 0010:write_comp_data+0x38/0x90 kernel/kcov.c:246
Call Trace:
<TASK>
prog_array_map_poke_run+0x77/0x380 kernel/bpf/arraymap.c:1096
__fd_array_map_delete_elem+0x197/0x310 kernel/bpf/arraymap.c:925
bpf_fd_array_map_clear kernel/bpf/arraymap.c:1000 [inline]
prog_array_map_clear_deferred+0x119/0x1b0 kernel/bpf/arraymap.c:1141
process_one_work+0x898/0x19d0 kernel/workqueue.c:3238
process_scheduled_works kernel/workqueue.c:3319 [inline]
worker_thread+0x770/0x10b0 kernel/workqueue.c:3400
kthread+0x465/0x880 kernel/kthread.c:464
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:153
ret_from_fork_asm+0x19/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
