| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: tracepoints: fix sleep while in atomic context in btrfs_sync_file()
The trace event btrfs_sync_file() is called in an atomic context (all trace
events are) and its call to dput(), which is needed due to the call to
dget_parent(), can sleep, triggering a kernel splat.
This can be reproduced by enabling the trace event and running btrfs/056
from fstests for example. The splat shown in dmesg is the following:
[53.919] BUG: sleeping function called from invalid context at fs/dcache.c:970
[53.947] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 32773, name: xfs_io
[53.988] preempt_count: 2, expected: 0
[53.967] RCU nest depth: 0, expected: 0
[53.943] Preemption disabled at:
[53.944] [<0000000000000000>] 0x0
[54.078] CPU: 0 UID: 0 PID: 32773 Comm: xfs_io Tainted: G W 7.1.0-rc1-btrfs-next-232+ #1 PREEMPT(full)
[54.070] Tainted: [W]=WARN
[54.071] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[54.072] Call Trace:
[54.074] <TASK>
[54.076] dump_stack_lvl+0x56/0x80
[54.079] __might_resched.cold+0xd6/0x10f
[54.072] dput.part.0+0x24/0x110
[54.078] trace_event_raw_event_btrfs_sync_file+0x75/0x140 [btrfs]
[54.089] btrfs_sync_file+0x1ed/0x530 [btrfs]
[54.087] ? __handle_mm_fault+0x8ae/0xed0
[54.089] btrfs_do_write_iter+0x172/0x210 [btrfs]
[54.091] vfs_write+0x21f/0x450
[54.094] __x64_sys_pwrite64+0x8d/0xc0
[54.096] ? do_user_addr_fault+0x20c/0x670
[54.099] do_syscall_64+0x60/0xf20
[54.092] ? clear_bhb_loop+0x60/0xb0
[54.094] entry_SYSCALL_64_after_hwframe+0x76/0x7e
So stop using dget_parent() and dput() and access the parent dentry
directly as dentry->d_parent. This is also what ext4 is doing in
its equivalent trace event ext4_sync_file_enter(). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: use GFP_ATOMIC in wacom_wac_queue_flush()
wacom_wac_queue_flush() is called via the .raw_event callback
(wacom_raw_event → wacom_wac_pen_serial_enforce → wacom_wac_queue_flush).
For USB HID devices, this callback is invoked from hid_irq_in(), which
is a URB completion handler running in atomic context. Using GFP_KERNEL
in this path can sleep, leading to a "scheduling while atomic" bug.
Use GFP_ATOMIC instead. The existing code already handles allocation
failure by skipping the fifo entry and continuing. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/mlx5: Fix racy bitfields and tighten struct layout
Bitfield operations are not atomic, they use a read-modify-write
pattern, therefore we should be careful not to pack bitfields that
can be concurrently updated into the same storage unit.
This split takes a binary approach: flags that are only modified
pre/post open/close remain bitfields, flags modified from user
action, including actions that reach across to another device (ex.
reset) use dedicated storage units.
Note mlx5_vhca_page_tracker.status is relocated to fill the alignment
hole this split exposes.
Bitfield justifications:
migrate_cap: written only in mlx5vf_cmd_set_migratable() at probe
chunk_mode: written only in mlx5vf_cmd_set_migratable() at probe
mig_state_cap: written only in mlx5vf_cmd_set_migratable() at probe
Dedicated storage units:
mdev_detach: written in the VF attach/detach event notifier
mlx5fv_vf_event() at runtime
log_active: written in mlx5vf_start_page_tracker()/
mlx5vf_stop_page_tracker() during runtime dirty tracking
deferred_reset: written in mlx5vf_state_mutex_unlock()/
mlx5vf_pci_aer_reset_done() during runtime reset handling
is_err: set by tracker error handling and dirty-log polling at runtime
object_changed: set by tracker event handling and cleared by dirty-log
polling at runtime |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: run gadget disconnect from sleepable suspend context
dwc3_gadget_suspend() takes dwc->lock with IRQs disabled and then calls
dwc3_disconnect_gadget(). For async callbacks that helper only uses
plain spin_unlock()/spin_lock(), so the gadget ->disconnect() callback
still runs with IRQs disabled and any sleepable callback trips Lockdep.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the dwc3_gadget_suspend() ->
dwc3_disconnect_gadget() -> gadget_driver->disconnect() chain, and
Lockdep reported:
BUG: sleeping function called from invalid context
gadget_disconnect+0x21/0x39 [vuln_msv]
dwc3_gadget_suspend.constprop.0+0x2b/0x42 [vuln_msv]
Keep the disconnect callback selection in one common helper, but add a
sleepable suspend-side wrapper which snapshots the callback under
dwc->lock and then runs it after spin_unlock_irqrestore(). The regular
event path still uses the existing spin_unlock()/spin_lock() window. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Detach event groups during remove_on_exec
perf_event_remove_on_exec() removes events by calling
perf_event_exit_event(). For top-level events, this removes the event from
the context with DETACH_EXIT only.
This can leave inconsistent group state when a removed event is a group
leader and the group contains siblings without remove_on_exec. If the group
was active, the surviving siblings can remain active and attached to the
removed leader's sibling list, but are no longer represented by a valid
group leader on the PMU context active lists.
A later close of the removed leader uses DETACH_GROUP and can promote the
still-active siblings from this stale group state. The next schedule-in can
then add an already-linked active_list entry again, corrupting the PMU
context active list.
With DEBUG_LIST enabled, this is caught as a list_add double-add in
merge_sched_in().
Fix this by detaching group relationships when remove_on_exec removes an
event. This preserves the existing task-exit and revoke behavior, while
ensuring surviving siblings are ungrouped before the removed event leaves
the context. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Drop task_to_inode and inet_conn_established from lsm sleepable hooks
bpf_lsm_task_to_inode() is called under rcu_read_lock() and
bpf_lsm_inet_conn_established() is called from softirq context, so
neither hook can be used by sleepable LSM programs. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject sleepable kprobe_multi programs at attach time
kprobe.multi programs run in atomic/RCU context and cannot sleep.
However, bpf_kprobe_multi_link_attach() did not validate whether the
program being attached had the sleepable flag set, allowing sleepable
helpers such as bpf_copy_from_user() to be invoked from a non-sleepable
context.
This causes a "sleeping function called from invalid context" splat:
BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:169
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1787, name: sudo
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 0
Fix this by rejecting sleepable programs early in
bpf_kprobe_multi_link_attach(), before any further processing. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/amd/ibs: Avoid calling perf_allow_kernel() from the IBS NMI handler
Calling perf_allow_kernel() from the NMI context is unsafe and could be
fatal. Capture the permission at event-initialization time by storing it
in event->hw.flags, and have the NMI handler rely on that cached flag
instead of making the call directly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: don't kill URBs in interrupt context
Serialization for the TX path was enforced by calling
usb_kill_urb()/usb_kill_anchored_urbs(), to prevent transmission before
a previous URB was completed. usb_tx_block() can be called from
interrupt context (e.g. in the HCD giveback path), so we can't always
use it to kill in-flight URBs.
Prevent sleeping during interrupt context by checking the tx_submitted
anchor for existing URBs. We now return -EBUSY, to indicate there's
a pending request. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/efi: Fix graceful fault handling after FPU softirq changes
Since commit d02198550423 ("x86/fpu: Improve crypto performance by
making kernel-mode FPU reliably usable in softirqs"), kernel_fpu_begin()
calls fpregs_lock() which uses local_bh_disable() instead of the
previous preempt_disable(). This sets SOFTIRQ_OFFSET in preempt_count
during the entire EFI runtime service call, causing in_interrupt() to
return true in normal task context.
The graceful page fault handler efi_crash_gracefully_on_page_fault()
uses in_interrupt() to bail out for faults in real interrupt context.
With SOFTIRQ_OFFSET now set, the handler always bails out, leaving EFI
firmware page faults unhandled. This escalates to die() which also sees
in_interrupt() as true and calls panic("Fatal exception in interrupt"),
resulting in a hard system freeze. On systems with buggy firmware that
triggers page faults during EFI runtime calls (e.g., accessing unmapped
memory in GetTime()), this causes an unrecoverable hang instead of the
expected graceful EFI_ABORTED recovery.
Fix by replacing in_interrupt() with !in_task(). This preserves the
original intent of bailing for interrupts or NMI faults, while no longer
falsely triggering from the FPU code path's local_bh_disable().
[ardb: Sashiko spotted that using 'in_hardirq() || in_nmi()' leaves a
window where a softirq may be taken before fpregs_lock() is
called, but after efi_rts_work.efi_rts_id has been assigned,
and any page faults occurring in that window will then be
misidentified as having been caused by the firmware. Instead,
use !in_task(), which incorporates in_serving_softirq(). ] |
| A race condition in Grafana Live allows authenticated users with Viewer role to trigger a server crash by sending concurrent requests that cause a fatal map access error. This results in complete service unavailability requiring restart of the Grafana server. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: gadget: Move vbus draw to workqueue context
Currently dwc3_gadget_vbus_draw() can be called from atomic
context, which in turn invokes power-supply-core APIs. And
some these PMIC APIs have operations that may sleep, leading
to kernel panic.
Fix this by moving the vbus_draw into a workqueue context. |
| emp3r0r is a C2 designed by Linux users for Linux environments. Prior to version 3.21.2, multiple shared maps are accessed without consistent synchronization across goroutines. Under concurrent activity, Go runtime can trigger `fatal error: concurrent map read and map write`, causing C2 process crash (availability loss). Version 3.21.2 fixes this issue. |
