| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Dell PowerProtect One, versions 20.1.0.0 and below, contain an Improper Certificate Validation vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Protection mechanism bypass. |
| Impact:
undici's ProxyAgent silently drops the requestTls option when configured with a SOCKS5 proxy URI (socks5:// or socks://). The target HTTPS connection through the SOCKS5 tunnel falls back to Node's default trust store, ignoring user-configured ca, cert, key, rejectUnauthorized, and servername settings.
Applications that pin to an internal or corporate CA via requestTls.ca will, when their proxy URI is SOCKS5, get the default Mozilla CA bundle as the trust anchor instead. Any cert signed by any publicly-trusted CA for the target hostname is accepted, breaking the intended pin and enabling MITM read and tamper of the HTTPS exchange.
Affected applications are those that use undici's ProxyAgent (or Socks5ProxyAgent directly) with SOCKS5 AND rely on requestTls for TLS scope restriction. The bug was introduced in undici 7.23.0 when SOCKS5 support was added.
Patches:
Upgrade to undici v7.28.0 or v8.5.0.
Workarounds:
No workaround is available within the SOCKS5 path. If a SOCKS5 proxy with TLS scope restriction is required and an upgrade is not yet possible, route the traffic through an HTTP-proxy ProxyAgent instead, where requestTls is honored correctly. |
| When an SSH server authentication callback returned PartialSuccessError with non-nil Permissions, those permissions were silently discarded, potentially dropping certificate restrictions such as force-command after a second factor succeeded. Returning non-nil Permissions with PartialSuccessError now results in a connection error. |
| ASE2000 2.35 through 2.37 is vulnerable to an improper certificate validation vulnerability, which may allow an attacker to impersonate the trusted peer, complete the TLS handshake, and read or modify protected communications. |
| Netmaker disables certificate verification on the connection to the configured mail server. The sender in pro/email/smtp.go assigns a TLS configuration whose skip-verify field is set to true unconditionally, directly beneath a comment stating that the setting should be false in production. No configuration value governs it and no code path restores verification, so the client accepts any certificate the mail server presents, including one an interposing party supplies. Mail that Netmaker sends over that connection includes password-reset messages carrying single-use tokens and user invitations carrying enrolment links, so a party positioned on the path between the server and its mail relay can read those messages in transit and use a captured reset token before the intended recipient does. The setting is absent from the development branch but present in the latest release. |
| kas is a setup tool for bitbake based projects. Prior to 5.4, internal SSH key setup triggered by SSH_PRIVATE_KEY or SSH_PRIVATE_KEY_FILE creates ~/.ssh/config when no user-specific SSH configuration exists and adds a global Host * rule containing StrictHostKeyChecking no. In kas/libcmds.py, ssh_no_host_key_check() runs without checking ctx.managed_env, so the setting persists after kas exits and affects future SSH sessions by the same local user, extending beyond the intended short-lived continuous integration environment. A later SSH connection can therefore accept an attacker-controlled host key without verification, increasing the risk of a man-in-the-middle attack that compromises session confidentiality or integrity. This issue is fixed in version 5.4. |
| IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the FSP management network protocol. An unauthenticated attacker on the management network can bypass authentication and perform any administrative operation on the managed system, including control of partition power state, configuration, and console access across all hosted partitions, resulting in a confidentiality, integrity, and availability impact to the managed system. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to improper certificate validation. |
| A flaw was found in gnutls. A remote attacker could exploit this vulnerability by presenting a specially crafted certificate that contains Uniform Resource Identifier (URI) or Service (SRV) Subject Alternative Names (SANs). This could cause the certificate validation process to incorrectly fall back to checking DNS hostnames against the Common Name (CN), potentially allowing the attacker to spoof legitimate services or intercept sensitive information. |
| Contour is a Kubernetes ingress controller using Envoy proxy. In versions 1.23.0 through 1.33.4, when an `HTTPProxy` is configured with incompatible combination of both `.spec.virtualhost.tls.enableFallbackCertificate: true` and `.spec.virtualhost.jwtProviders`, Contour does not reject the configuration. Consequently, requests from clients that do not send TLS SNI or send an unrecognized SNI (one that does not match any `HTTPProxy` FQDN) bypass configured JWT verification and are proxied to upstream services without a valid token. This issue is fixed in Contour v1.33.5. Contour now rejects and marks invalid any `HTTPProxy` resources that combine `.spec.virtualhost.tls.enableFallbackCertificate: true` with `.spec.virtualhost.jwtProviders`. Affected resources will receive a status condition with the error reason `TLSIncompatibleFeatures`. As a workaround, do not enable `.spec.virtualhost.tls.enableFallbackCertificate` on `HTTPProxy` resources that also define `.spec.virtualhost.jwtProviders`. Remove one of the two settings to avoid the invalid configuration. |
| Netty (io.netty:netty-handler) versions from 4.2.0.Final through 4.2.16.Final and versions through 4.1.136.Final disable TLS hostname verification on the SslProvider.OPENSSL client path when a plain (non-extended) X509TrustManager is used and Unsafe-based trust-manager wrapping is unavailable (Java 25+). In this configuration the OpenSSL client does not perform hostname verification, allowing a man-in-the-middle attacker to present a certificate issued for a different hostname that is accepted without validation. Fixed in 4.2.17.Final and 4.1.137.Final. |
| In Splunk Connect for Kafka versions below 2.2.7, an unauthenticated user positioned in the network path could read or alter all relevant data sent from the connector when Kerberos authentication is used with Hypertext Transfer Protocol (HTTP) Event Collector in Splunk Enterprise. The vulnerability is possible because the Kerberos authentication path does not apply the configured certificate validation options when it builds the HTTP client. For more information see Install Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/install/install-splunk-connect-for-kafka), Security configurations for Splunk Connect for Kafka (https://help.splunk.com/en/splunk-enterprise/get-data-in/splunk-connect-for-kafka/2.2/configure/security-configurations-for-splunk-connect-for-kafka), and Set up and use HTTP Event Collector with configuration files (https://help.splunk.com/en/splunk-enterprise/get-data-in/get-started-with-getting-data-in/9.4/get-data-with-http-event-collector/set-up-and-use-http-event-collector-with-configuration-files) in the Splunk documentation. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to impersonate the TNC policy server and modify traffic due to improper certificate validation. |
| A flaw was found in JSS (Java Security Services). The JSSTrustManager class does not verify NSS trust flags when validating CA certificates, allowing certificates present in the NSS database without TRUSTED_CA flags to be accepted as trust anchors for TLS connections. In non-default configurations where certificate revocation checking is disabled, this could allow a man-in-the-middle attacker to forge certificates accepted by PKI client connections. |
| the Undertow AJP listener honours forged ssl_cert and is_ssl AJP attributes without requiring any shared-secret authentication. This enables an unauthenticated attacker with direct TCP access to port 8009 to bypass CLIENT-CERT authentication by injecting a forged X.509 certificate via the AJP protocol. |
| Mastodon is a free, open-source social network server based on ActivityPub. Prior to 4.4.19 and from 4.5.0 until 4.5.12, Mastodon's app/models/concerns/user/ldap_authenticable.rb mutates OpenSSL::SSL::SSLContext::DEFAULT_PARAMS when LDAP authentication uses LDAP_TLS_NO_VERIFY=true, disabling SSL and TLS certificate verification globally for requests made by puma web processes while sidekiq background jobs remain unaffected. This issue is fixed in versions 4.4.19 and 4.5.12. |
| The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.33.0, com.rabbitmq.client.ConnectionFactory.useSslProtocol() and ConnectionFactory.useSslProtocol(String) configure com.rabbitmq.client.TrustEverythingTrustManager and leave hostname verification disabled, causing arbitrary server certificates, including self-signed certificates, to be accepted. A network attacker able to intercept a TLS connection can impersonate the RabbitMQ broker, read protected AMQP traffic, and modify traffic without certificate or hostname validation. The fix changes the production TLS helpers to use the JVM default trust store and enables hostname verification, while retaining an explicitly named development-only no-verification helper. This issue is fixed in version 5.33.0. |
| Improper certificate validation in the Devolutions Server connection handling in Devolutions Password Manager 2026.2.1.0 and earlier on Android, iOS, and macOS allows an adjacent-network attacker to intercept and modify sensitive information via a forged TLS certificate. |
| In Splunk SOAR versions below 8.6.0, an unauthenticated user who can observe or alter network traffic between Splunk SOAR and a configured CyberArk Representational State Transfer (REST) server could access or modify all relevant data exchanged through that credential manager. The vulnerability is possible because the CyberArk REST client does not verify server certificates by default. The attack requires the attacker to have network-path interception capability between Splunk SOAR and the configured CyberArk REST server. For more information see Manage your organization's credentials with a password vault (https://help.splunk.com/en/splunk-soar/soar-cloud/administer-soar-cloud/configure-administration-settings-in-splunk-soar-cloud/manage-your-organizations-credentials-with-a-password-vault) in the Splunk documentation. |
| ePA 3.x Integration implements the authorization workflow and writes Medical Information Objects to Germany's electronic patient record. Prior to 1.3.0, ePA 3.x Integration performs VAU server certificate validation in app/vau/VAUProtokoll.py without anchoring the signed_vau_server_pub_keys and AUT_VAU_CertData certificate path to independent trusted material. A network-positioned attacker between the DiGA backend and the ePA system can intercept the VAU handshake, supply attacker-controlled certificate and key material, and satisfy the circular trust relationship. Because TLS certificate verification is also disabled in affected versions, no independent server-authentication layer prevents the attack. The attacker can impersonate the VAU server, control the negotiated session keys, and read or modify all encrypted VAU traffic. This issue is fixed in version 1.3.0. |
