| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Buffer overflow vulnerabilities exist in an underlying service of AOS-CX that could lead to an unauthenticated denial-of-service condition by sending specially crafted packets to the affected device. Successful exploitation of these vulnerabilities results in a disruption of normal operation of the underlying operating system. |
| jackson-databind contains the general-purpose data-binding functionality and tree-model for Jackson Data Processor. From 2.10.0 until 2.18.8, 2.21.4, and 3.1.4, BasicPolymorphicTypeValidator.Builder.allowIfSubTypeIsArray() allowlists any array type based only on clazz.isArray(), without validating the array's component (element) type against the configured allowlist. A PTV built with allowIfSubTypeIsArray() plus an explicit concrete-type allowlist therefore still permits EvilType[] even though EvilType is not allowlisted. When Jackson deserializes the elements and no per-element type IDs are present, it instantiates the component type directly with no further PTV check, bypassing the allowlist. This vulnerability is fixed in 2.18.8, 2.21.4, and 3.1.4. |
| Buffer Over-read vulnerability in Apache HTTP Server via outbound OCSP requests to an attacker controlled OCSP server
This issue affects Apache HTTP Server: from 2.4.0 through 2.4.67.
Users are recommended to upgrade to version 2.4.68, which fixes the issue. |
| Heap-based Buffer Overflow vulnerability in Apache HTTP Server with mod_xml2enc, xml2StartParse, and untrusted content
This issue affects Apache HTTP Server: from 2.4.0 through 2.4.67.
Users are recommended to upgrade to version 2.4.68, which fixes the issue. |
| Pathological inputs could cause DoS through consumePhrase when parsing an email address according to RFC 5322. |
| Axios is a promise based HTTP client for the browser and Node.js. From version 1.0.0 to before version 1.15.2, fFive config properties (auth, baseURL, socketPath, beforeRedirect, and insecureHTTPParser) in the HTTP adapter are read via direct property access without hasOwnProperty guards, making them exploitable as prototype pollution gadgets. When Object.prototype is polluted by another dependency in the same process, axios silently picks up these polluted values on every outbound HTTP request. This issue has been patched in version 1.15.2. |
| The RSA and DSA public key parsers did not enforce size limits on key parameters. A crafted public key with an excessively large modulus or DSA parameter could cause several minutes of CPU consumption during signature verification. This could be triggered by unauthenticated clients during public key authentication. RSA moduli are now limited to 8192 bits, and DSA parameters are validated per FIPS 186-2. |
| Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. Prior to 4.1.4 and 3.0.5, decrypting a JSON Web Encryption (JWE) object will panic if the alg field indicates a key wrapping algorithm (one ending in KW, with the exception of A128GCMKW, A192GCMKW, and A256GCMKW) and the encrypted_key field is empty. The panic happens when cipher.KeyUnwrap() in key_wrap.go attempts to allocate a slice with a zero or negative length based on the length of the encrypted_key. This code path is reachable from ParseEncrypted() / ParseEncryptedJSON() / ParseEncryptedCompact() followed by Decrypt() on the resulting object. Note that the parse functions take a list of accepted key algorithms. If the accepted key algorithms do not include any key wrapping algorithms, parsing will fail and the application will be unaffected. This panic is also reachable by calling cipher.KeyUnwrap() directly with any ciphertext parameter less than 16 bytes long, but calling this function directly is less common. Panics can lead to denial of service. This vulnerability is fixed in 4.1.4 and 3.0.5. |
| A buffer overflow in mod_proxy_html in Apache HTTP Server 2.4.67 and earlier allows an attack by an untrusted backend.
Users are recommended to upgrade to version 2.4.68, which fixes this issue. |
| Heap-based Buffer Overflow vulnerability in mod_proxy_ajp of Apache HTTP Server.
If mod_proxy_ajp connects to a malicious AJP server this AJP server can send a malicious AJP message back to mod_proxy_ajp and cause it to write 4 attacker controlled bytes after the end of a heap based buffer.
This issue affects Apache HTTP Server: through 2.4.66.
Users are recommended to upgrade to version 2.4.67, which fixes the issue. |
| openssl_encrypt versions before 1.4.9 fail to sanitize recovery-slot metadata in the desktop GUI, allowing attackers to inject control characters and line separators into the irreversible-removal confirmation dialog. Attackers can craft encrypted files with malicious slot identifiers containing bidi overrides or line-separator characters to forge warning text and deceive users during file removal operations. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: RAW sockets using IPPROTO_RAW MUST drop incoming ICMP
Yizhou Zhao reported that simply having one RAW socket on protocol
IPPROTO_RAW (255) was dangerous.
socket(AF_INET, SOCK_RAW, 255);
A malicious incoming ICMP packet can set the protocol field to 255
and match this socket, leading to FNHE cache changes.
inner = IP(src="192.168.2.1", dst="8.8.8.8", proto=255)/Raw("TEST")
pkt = IP(src="192.168.1.1", dst="192.168.2.1")/ICMP(type=3, code=4, nexthopmtu=576)/inner
"man 7 raw" states:
A protocol of IPPROTO_RAW implies enabled IP_HDRINCL and is able
to send any IP protocol that is specified in the passed header.
Receiving of all IP protocols via IPPROTO_RAW is not possible
using raw sockets.
Make sure we drop these malicious packets. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmvnic: Use kernel helpers for hex dumps
Previously, when the driver was printing hex dumps, the buffer was cast
to an 8 byte long and printed using string formatters. If the buffer
size was not a multiple of 8 then a read buffer overflow was possible.
Therefore, create a new ibmvnic function that loops over a buffer and
calls hex_dump_to_buffer instead.
This patch address KASAN reports like the one below:
ibmvnic 30000003 env3: Login Buffer:
ibmvnic 30000003 env3: 01000000af000000
<...>
ibmvnic 30000003 env3: 2e6d62692e736261
ibmvnic 30000003 env3: 65050003006d6f63
==================================================================
BUG: KASAN: slab-out-of-bounds in ibmvnic_login+0xacc/0xffc [ibmvnic]
Read of size 8 at addr c0000001331a9aa8 by task ip/17681
<...>
Allocated by task 17681:
<...>
ibmvnic_login+0x2f0/0xffc [ibmvnic]
ibmvnic_open+0x148/0x308 [ibmvnic]
__dev_open+0x1ac/0x304
<...>
The buggy address is located 168 bytes inside of
allocated 175-byte region [c0000001331a9a00, c0000001331a9aaf)
<...>
=================================================================
ibmvnic 30000003 env3: 000000000033766e |
| Date::Manip versions through 7.00 for Perl allow CPU exhaustion via quadratic backtracking in the unanchored time substitution in _parse_time.
_parse_time removes a time from anywhere in the string with the unanchored substitution `s/$timerx/ /`, where $timerx is an auto-generated alternation of time patterns reached through a leading `(?:$atrx|^|\s+)`. The engine therefore retries the match at every position of an interior whitespace run: at each start position the leading `\s+` consumes the rest of the run greedily, the time alternation fails because the run holds no digits, and the engine backtracks a space at a time across the run before advancing the start position, which is quadratic in the length of the run. No time need be present in the string for this to happen, only a long run of whitespace, and the parse time rises about fourfold for each doubling of the run: a few kilobytes of whitespace costs seconds of CPU per parse and tens of kilobytes costs minutes.
Any caller that passes an untrusted string of unbounded length to ParseDate(), Date::Manip::Date->parse() or ->parse_time() can be made to spend unbounded CPU in a single parse, a denial of service. |
| Date::Manip versions through 7.00 for Perl return corrupted dates via non-ASCII decimal digits that pass the numeric range tests in check.
The parse regexes capture year, month and day with the `\d` shorthand, which on a character string matches the whole Unicode decimal digit property `\p{Nd}` and not just `[0-9]`. Date::Manip::Base::check then validates the captured fields with numeric comparisons alone (`$y<1 || $y>9999`, `$m<1 || $m>12`, `$d<1 || $d>$days`), and _parse_check stores the numified fields (`$y+0`). Perl truncates a string at the first character that is not an ASCII digit, so a field whose leading characters are ASCII digits numifies to an in-range prefix and satisfies every test: a year field of three ASCII digits followed by U+0664 ARABIC-INDIC DIGIT FOUR numifies to 202, giving the year 0202, and one non-ASCII digit in the month or day field shifts those fields the same way. The hour, minute and second fields match explicit ASCII character classes (`0?[0-9]`, `[0-5][0-9]`) and do not shift, though a non-ASCII digit in a fractional hour or minute field truncates the fraction.
Any caller that passes an untrusted character string to ParseDate() or Date::Manip::Date->parse() can get back a date that differs from the string it parsed, with no parse error. Where the parsed date gates logic such as an expiry check or a retention window, the shift goes unnoticed. |
| The RegistrationMagic WordPress plugin before 6.0.9.9 does not escape a registration form field value before outputting it in an HTML attribute on an administrative page, allowing unauthenticated users to perform Stored Cross-Site Scripting attacks against high privilege users such as admin. |
| Buffer overflow in GPU in Google Chrome on on Windows prior to 152.0.7977.75 allowed a remote attacker who had compromised the renderer process to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| A flaw was found in Jolokia's JSR-160 proxy functionality where insufficient validation of client-controlled JMX service URLs allows a bypass of the denylist introduced to mitigate CVE-2018-1000130. The proxy accepts a `target.url` value from a Jolokia POST request and passes it to `JMXServiceURL` and `JMXConnectorFactory` for establishing the remote JMX connection. The existing denylist only rejects URLs matching `service:jmx:rmi:///jndi/ldap:.*`, which can be bypassed using alternative valid JMX service URL forms, including `ldaps://` schemes or LDAP URLs with a non-empty JMX host component. These URLs are accepted as valid `JMXServiceURL` objects and can cause the Jolokia agent JVM to perform a JNDI lookup against an attacker-controlled LDAP endpoint. This can result in server-side request forgery (SSRF), forwarding of supplied JMX credentials to the remote endpoint, and potentially remote code execution depending on the classes and configuration available in the target JVM. |
| Internally found bugs present in Thunderbird 154 and Thunderbird ESR 153.1. Some of these bugs showed evidence of memory corruption or another security-relevant defect and we presume that with enough effort some of these could have been exploited. This vulnerability was fixed in Firefox 155, Firefox ESR 153.2, Thunderbird 155, and Thunderbird 153.2. |
| go-wind-cms (GoWind) before 1.0.0 has a missing authorization vulnerability. The NewAuthorizer() function in app/admin/service/internal/data/data.go and app/app/service/internal/data/data.go returns a no-op authorization engine (noop.State{}), so the authz middleware always allows requests. Any authenticated user (regardless of role or tenant) can invoke administrative APIs such as deleting users, resetting passwords, and creating tenants. |
