| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Allocation of Resources Without Limits or Throttling vulnerability in mtrudel bandit allows an unauthenticated remote attacker to pin an unbounded number of HTTP/2 stream processes indefinitely via connection-level flow control. When a stream's response body outruns the HTTP/2 connection-level send window (default 65,535 bytes, shared across all streams on the connection), Bandit.HTTP2.Connection queues the remaining bytes and a reply closure in pending_sends and the stream process blocks forever inside a synchronous call to the connection process. Nothing bounds that wait and nothing purges the queue: a client RST_STREAM for the blocked stream is delivered to its mailbox but never read while it is stuck inside the call, so cancelling frees nothing, and periodic PING frames keep the transport-level read timeout from ever firing. The equivalent block on the stream-level send window is already bounded at 15 seconds; the connection-level path had no such bound.
Each stalled stream pins its process, Plug state, and any resource the Plug holds across the blocked write, such as a pooled upstream connection in a reverse-proxy Plug. The attacker chooses any endpoint whose response exceeds the connection window (common for most non-trivial payloads), grants a generous stream-level window so only the connection window limits it, and keeps the connection alive with periodic PINGs; the primitive is repeatable across streams and connections at the cost of one idle socket each.
This issue affects bandit: from 0.3.4 before 1.12.5. |
| BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. Prior to 0.31.1, BuildKit read attacker-controlled /etc/passwd and /etc/group files without an upper bound while resolving a username to a user identifier or group identifier in executor/oci/user.go and solver/llbsolver/ops/user_linux.go. A malicious base image or build could provide oversized files that exhausted memory during user resolution and caused out-of-memory termination of the buildkitd process. This issue is fixed in version 0.31.1. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix folio_queue ENOMEM in writeback by adding a mempool
Fix the handling of folio_queue allocation failure in writeback by adding a
mempool and passing in gfp_t flags to the rolling buffer functions that
allocate memory, using the mempool if gfp != GFP_KERNEL.
This is then extended upwards and the gfp to be used for a request is stored
in the netfs_io_request struct and is then used for both requests and
subrequests, eliminating the sleeping loops there.
The failure caused:
folio != NULL
WARNING: fs/netfs/write_issue.c:603 at netfs_writepages+0x883/0xa10 fs/netfs/write_issue.c:603, CPU#3: syz.0.17/5919 |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: fix buffer leak in xsk_drop_skb() for AF_XDP multi-buffer Tx
This patch is inspired by the check[1] from sashiko. It says when
overflow happens, the address of cq to be published is invalid.
Actually the severer thing is the whole process of publishing the
address of cq in this particular case is not right: it should truely
publish the address and advance the cached_prod in cq as long as it
reads descriptors from txq.
The following is the full analysis.
xsk_drop_skb() is called in three places, which all discard a partially
built multi-buffer skb:
1) xsk_build_skb() -EOVERFLOW error path: packet exceeds MAX_SKB_FRAGS
2) __xsk_generic_xmit() post-loop cleanup: an invalid descriptor in
the TX ring prevents the partial packet from completing
3) xsk_release(): socket close while xs->skb holds an incomplete packet
In all three cases, the TX descriptors for the already-processed frags
have been consumed from the TX ring (xskq_cons_release), and CQ slots
have been reserved. However, xsk_drop_skb() calls xsk_consume_skb()
which cancels the CQ reservations via xsk_cq_cancel_locked(). Since
the buffer addresses never appear in the completion queue, userspace
permanently loses track of these buffers.
Fix this by letting consume_skb() trigger the existing xsk_destruct_skb
destructor, which already submits buffer addresses to the CQ via
xsk_cq_submit_addr_locked().
Note that cancelling the descriptors back to the TX ring (via
xskq_cons_cancel_n) is not a appropriate option because an oversized
packet that always exceeds MAX_SKB_FRAGS would be retried indefinitely,
which is an obviously deadlock bug in the TX path.
Also move the desc->addr assignment in xsk_build_skb() above the
overflow check so that the current descriptor's address is recorded
before a potential -EOVERFLOW jump to free_err, consistent with the
zerocopy path in xsk_build_skb_zerocopy().
[1]: https://lore.kernel.org/all/20260425041726.85FB3C2BCB2@smtp.kernel.org/ |
| Joomla Extension - cmsjunkie.com - DOS vector in pagination parameter handling in J-BusinessDirectory < 6.2.3 - Pagination values were not strictly typed. Array/non-numeric values (for example limitstart[]) could trigger PHP type errors in arithmetic, and limit was not validated before use in list queries. |
| Command Injection in BOSH CLI tool on windows in Cloud Foundry allows a remote attacker to execute arbitrary shell commands via command injection vulnerabilities |
| The MCP Streamable HTTP server transport (WebFlux and WebMvc variants) does not place any limit on the number of sessions it retains, and by default does not require clients to be authenticated. As a result, a remote attacker can cause the server to accumulate an unbounded number of sessions over time, gradually exhausting available memory and ultimately causing a Denial of Service that affects all legitimate clients.
Affected versions:
Spring AI: 2.0.0 |
| A security flaw has been discovered in Comfast CF-N1-S 2.6.0.1. Affected by this issue is the function system of the file /cgi-bin/mbox-config?method=SET§ion=ntp_timezone. The manipulation of the argument timestr results in command injection. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. |
| Svelte devalue is a JavaScript library that serializes values into strings when JSON.stringify isn't sufficient for the job. From version 5.6.3 to before version 5.8.1, devalue.parse could, due to quirks in some JavaScript engines, be convinced to allocate much more memory than was needed when deserializing sparse arrays, leading to excessive memory consumption. This issue has been patched in version 5.8.1. |
| jsoup through 1.23.2, fixed in commit 862ba2f, contains an uncontrolled resource consumption vulnerability in XmlTreeBuilder that allows remote attackers to exhaust JVM heap memory by supplying a deeply nested XML document with uniquely-namespaced elements. The builder copies the entire inherited namespace map on every start element, causing quadratic time and memory complexity, which attackers can exploit to trigger an OutOfMemoryError and terminate the application. |
| Libevent is an event notification library. From 2.2.0-alpha-dev until 2.2.2-alpha, the libevent WebSocket server in ws.c accumulates fragmented frames in evws->incomplete_frames without enforcing a total message-size limit. An unauthenticated remote client can repeatedly send fragmented WebSocket frames below WS_MAX_RECV_FRAME_SZ with FIN=0, causing the evbuffer to grow without bound until the process or host exhausts memory. This issue is fixed in version 2.2.2-alpha. |
| Unauthenticated Denial of Service Attack in Starter Templates by Kadence WP <= 2.3.3 versions. |
| aiosmtplib is an asynchronous SMTP client for use with asyncio. Prior to 5.1.1, SMTP.mail(), SMTP.rcpt(), SMTP.vrfy(), and SMTP.expn() send caller-supplied addresses without rejecting embedded CR or LF bytes. Data after the line break is framed as additional standalone SMTP command lines, allowing an attacker who influences an envelope sender or recipient to inject commands such as MAIL FROM, RCPT TO, RSET, DATA, or AUTH. SMTP.sendmail() and SMTP.send() without a Message object pass addresses through the affected methods, while SMTP.send_message() is not affected. Successful injection can desynchronize the command-response pipeline, hang the SMTP instance, or send an arbitrary message without requiring attacker control of the SMTP server. This issue is fixed in version 5.1.1. |
| Vulnerability in the MySQL Connectors product of Oracle MySQL (component: Connector/ODBC). The supported version that is affected is 26.7.0. Easily exploitable vulnerability allows low privileged attacker with network access via multiple protocols to compromise MySQL Connectors. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Connectors. CVSS 3.1 Base Score 6.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). |
| HCL IntelliOps Event Management (IEM) is affected by insufficient logging. Insufficient logging weakens accountability, obscures attack detection, and enables privilege probing. |
| Mailpit is an email testing tool and API for developers. Prior to 1.30.4, Mailpit decodes attacker-supplied image attachments into a full raster before checking decoded dimensions, pixel count, or memory use in the GET /api/v1/message/{id}/part/{partID}/thumb endpoint. The Thumbnail handler in server/apiv1/thumbnails.go obtains attachment bytes through storage.GetAttachmentPart(), accepts image/* content, and calls imaging.Decode() with AutoOrientation before imaging.Fill() scales the image to 180 by 120 pixels. A compact image declaring very large dimensions can therefore consume disproportionately large memory and CPU, and opening the message UI can trigger the same endpoint through server/ui-src/components/message/MessageAttachments.vue. This can degrade availability when an unauthenticated client can store the crafted attachment and reach the web API. This issue is fixed in version 1.30.4. |
| Mailpit is an email testing tool and API for developers. From 1.30.0 until 1.30.5, Mailpit's internal/smtpd/smtpd.go readData() function calls bufio.Reader.ReadBytes before applying the len(data)+len(line) size check to the completed SMTP DATA line against Server.MaxSize. An unauthenticated SMTP client can send a single line larger than the configured MaxMessageSize, causing the full line to be allocated before Mailpit returns the 552 5.3.4 rejection. This post-fix gap remains after normal multi-line DATA accumulation was bounded, and concurrent oversized lines can create substantial memory pressure beyond the configured message-size cap. This issue is fixed in version 1.30.5. |
| A vulnerability was identified in chenhg5 cc-connect up to 1.4.1. This affects the function shellExecCommand of the file core/engine.go of the component Management API. Such manipulation of the argument exec leads to os command injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The reported GitHub issue was closed automatically due to inactivity. |
| A vulnerability has been found in Tenda CH22 1.0.0.1. The affected element is the function formcreateFileName of the file /goform/formcreateFileName. The manipulation of the argument fileNameMit leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was identified in TRENDnet TV-IP751WIC 11.03.03. Affected by this vulnerability is an unknown functionality of the file /cgi-bin/admin/set_time.cgi of the component alphapd. The manipulation leads to command injection. The attack can be initiated remotely. The exploit is publicly available and might be used. |
