Export limit exceeded: 398538 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 398538 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10657 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-1706 | 2026-04-15 | 7.5 High | ||
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions. | ||||
| CVE-2024-45405 | 1 Byron | 1 Gitoxide | 2026-04-15 | 6 Medium |
| `gix-path` is a crate of the `gitoxide` project (an implementation of `git` written in Rust) dealing paths and their conversions. Prior to version 0.10.11, `gix-path` runs `git` to find the path of a configuration file associated with the `git` installation, but improperly resolves paths containing unusual or non-ASCII characters, in rare cases enabling a local attacker to inject configuration leading to code execution. Version 0.10.11 contains a patch for the issue. In `gix_path::env`, the underlying implementation of the `installation_config` and `installation_config_prefix` functions calls `git config -l --show-origin` to find the path of a file to treat as belonging to the `git` installation. Affected versions of `gix-path` do not pass `-z`/`--null` to cause `git` to report literal paths. Instead, to cover the occasional case that `git` outputs a quoted path, they attempt to parse the path by stripping the quotation marks. The problem is that, when a path is quoted, it may change in substantial ways beyond the concatenation of quotation marks. If not reversed, these changes can result in another valid path that is not equivalent to the original. On a single-user system, it is not possible to exploit this, unless `GIT_CONFIG_SYSTEM` and `GIT_CONFIG_GLOBAL` have been set to unusual values or Git has been installed in an unusual way. Such a scenario is not expected. Exploitation is unlikely even on a multi-user system, though it is plausible in some uncommon configurations or use cases. In general, exploitation is more likely to succeed if users are expected to install `git` themselves, and are likely to do so in predictable locations; locations where `git` is installed, whether due to usernames in their paths or otherwise, contain characters that `git` quotes by default in paths, such as non-English letters and accented letters; a custom `system`-scope configuration file is specified with the `GIT_CONFIG_SYSTEM` environment variable, and its path is in an unusual location or has strangely named components; or a `system`-scope configuration file is absent, empty, or suppressed by means other than `GIT_CONFIG_NOSYSTEM`. Currently, `gix-path` can treat a `global`-scope configuration file as belonging to the installation if no higher scope configuration file is available. This increases the likelihood of exploitation even on a system where `git` is installed system-wide in an ordinary way. However, exploitation is expected to be very difficult even under any combination of those factors. | ||||
| CVE-2025-11677 | 1 Warmcat | 1 Libwebsockets | 2026-04-15 | 3.7 Low |
| Use After Free in WebSocket server implementation in lws_handshake_server in warmcat libwebsockets may allow an attacker, in specific configurations where the user provides a callback function that handles LWS_CALLBACK_HTTP_CONFIRM_UPGRADE, to achieve denial of service. | ||||
| CVE-2025-3450 | 1 Br-automation | 1 Automation Runtime | 2026-04-15 | 10 Critical |
| An Improper Resource Locking vulnerability in the SDM component of B&R Automation Runtime versions before 6.3 and before Q4.93 may allow an unauthenticated network-based attacker to delete data causing denial of service conditions. | ||||
| CVE-2025-2027 | 2026-04-15 | N/A | ||
| A double free vulnerability has been identified in the ASUS System Analysis service. This vulnerability can be triggered by sending specially crafted local RPC requests, leading to the service crash and potentially memory manipulation in some rare circumstances. Refer to the 'Security Update for MyASUS' section on the ASUS Security Advisory for more information. | ||||
| CVE-2024-3051 | 1 Silabs | 1 Z\/ip Gateway Sdk | 2026-04-15 | 7.5 High |
| Malformed Device Reset Locally command classes can be sent to temporarily deny service to an end device. Any frames sent by the end device will not be acknowledged by the gateway during this time. | ||||
| CVE-2024-4418 | 1 Redhat | 3 Advanced Virtualization, Enterprise Linux, Rhel Eus | 2026-04-15 | 6.2 Medium |
| A race condition leading to a stack use-after-free flaw was found in libvirt. Due to a bad assumption in the virNetClientIOEventLoop() method, the `data` pointer to a stack-allocated virNetClientIOEventData structure ended up being used in the virNetClientIOEventFD callback while the data pointer's stack frame was concurrently being "freed" when returning from virNetClientIOEventLoop(). The 'virtproxyd' daemon can be used to trigger requests. If libvirt is configured with fine-grained access control, this issue, in theory, allows a user to escape their otherwise limited access. This flaw allows a local, unprivileged user to access virtproxyd without authenticating. Remote users would need to authenticate before they could access it. | ||||
| CVE-2025-41653 | 2026-04-15 | 7.5 High | ||
| An unauthenticated remote attacker can exploit a denial-of-service vulnerability in the device's web server functionality by sending a specially crafted HTTP request with a malicious header, potentially causing the server to crash or become unresponsive. | ||||
| CVE-2024-9979 | 1 Redhat | 2 Ansible Automation Platform, Enterprise Linux | 2026-04-15 | 5.3 Medium |
| A flaw was found in PyO3. This vulnerability causes a use-after-free issue, potentially leading to memory corruption or crashes via unsound borrowing from weak Python references. | ||||
| CVE-2024-1848 | 2026-04-15 | 7.8 High | ||
| Heap-based Buffer Overflow, Memory Corruption, Out-Of-Bounds Read, Out-Of-Bounds Write, Stack-based Buffer Overflow, Type Confusion, Uninitialized Variable, Use-After-Free vulnerabilities exist in the file reading procedure in SOLIDWORKS Desktop on Release SOLIDWORKS 2024. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted CATPART, DWG, DXF, IPT, JT, SAT, SLDDRW, SLDPRT, STL, STP, X_B or X_T file. | ||||
| CVE-2025-40001 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mvsas: Fix use-after-free bugs in mvs_work_queue During the detaching of Marvell's SAS/SATA controller, the original code calls cancel_delayed_work() in mvs_free() to cancel the delayed work item mwq->work_q. However, if mwq->work_q is already running, the cancel_delayed_work() may fail to cancel it. This can lead to use-after-free scenarios where mvs_free() frees the mvs_info while mvs_work_queue() is still executing and attempts to access the already-freed mvs_info. A typical race condition is illustrated below: CPU 0 (remove) | CPU 1 (delayed work callback) mvs_pci_remove() | mvs_free() | mvs_work_queue() cancel_delayed_work() | kfree(mvi) | | mvi-> // UAF Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the delayed work item is properly canceled and any executing delayed work item completes before the mvs_info is deallocated. This bug was found by static analysis. | ||||
| CVE-2025-9020 | 1 Dronecode | 1 Px4 Drone Autopilot | 2026-04-15 | 4.5 Medium |
| A vulnerability was found in PX4 PX4-Autopilot up to 1.15.4. This issue affects the function MavlinkReceiver::handle_message_serial_control of the file src/modules/mavlink/mavlink_receiver.cpp of the component Mavlink Shell Closing Handler. The manipulation of the argument _mavlink_shell leads to use after free. An attack has to be approached locally. The complexity of an attack is rather high. The exploitation is known to be difficult. The identifier of the patch is 4395d4f00c49b888f030f5b43e2a779f1fa78708. It is recommended to apply a patch to fix this issue. | ||||
| CVE-2025-23281 | 1 Nvidia | 1 Gpu Display Driver | 2026-04-15 | 7 High |
| NVIDIA GPU Display Driver for Windows contains a vulnerability where an attacker with local unprivileged access that can win a race condition might be able to trigger a use-after-free error. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, denial of service, or information disclosure. | ||||
| CVE-2024-38920 | 1 Open Robotics | 2 Nav2 Humble, Ros2 | 2026-04-15 | 9.1 Critical |
| Open Robotics Robotic Operating System 2 (ROS2) and Nav2 humble versions were discovered to contain a use-after-free via the nav2_amcl process. This vulnerability is triggerd via remotely sending a request for change the value of dynamic-parameter`/amcl max_beams` . | ||||
| CVE-2024-38910 | 1 Open Robotics | 2 Nav2 Humble, Ros2 | 2026-04-15 | 7.5 High |
| Open Robotics Robotic Operating System 2 (ROS2) and Nav2 humble version was discovered to contain a use-after-free in the nav2_amcl process. This vulnerability is triggered via sending a request to change dynamic parameters. | ||||
| CVE-2025-59734 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.5 Medium |
| It is possible to cause an use-after-free write in SANM decoding with a carefully crafted animation using subversion <2. When a STOR chunk is present, a subsequent FOBJ chunk will be saved in ctx->stored_frame. Stored frames can later be referenced by FTCH chunks. For files using subversion < 2, the undecoded frame is stored, and decoded again when the FTCH chunks are parsed. However, in process_frame_obj if the frame has an invalid size, there’s an early return, with a value of 0. This causes the code in decode_frame to still store the raw frame buffer into ctx->stored_frame. Leaving ctx->has_dimensions set to false. A subsequent chunk with type FTCH would call process_ftch and decode that frame obj again, adding to the top/left values and calling process_frame_obj again. Given that we never set ctx->have_dimensions before, this time we set the dimensions, calling init_buffers, which can reallocate the buffer in ctx->stored_frame, freeing the previous one. However, the GetByteContext object gb still holds a reference to the old buffer. Finally, when the code tries to decode the frame, codecs that accept a GetByteContext as a parameter will trigger a use-after-free read when using gb. GetByteContext is only used for reading bytes, so at most one could read invalid data. There are no heap allocations between the free and when the object is accessed. However, upon returning to process_ftch, the code restores the original values for top/left in stored_frame, writing 4 bytes to the freed data at offset 6, potentially corrupting the allocator’s metadata. This issue can be triggered just by probing whether a file has the sanm format. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-20134 | 1 Cisco | 2 Adaptive Security Appliance Software, Firepower Threat Defense Software | 2026-04-15 | 8.6 High |
| A vulnerability in the certificate processing of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to improper parsing of SSL/TLS certificates. An attacker could exploit this vulnerability by sending crafted DNS packets that match a static Network Address Translation (NAT) rule with DNS inspection enabled through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. | ||||
| CVE-2026-4684 | 1 Mozilla | 2 Firefox, Firefox Esr | 2026-04-14 | 7.5 High |
| Race condition, use-after-free in the Graphics: WebRender component. This vulnerability was fixed in Firefox 149, Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9. | ||||
| CVE-2026-4688 | 1 Mozilla | 2 Firefox, Firefox Esr | 2026-04-14 | 9.6 Critical |
| Sandbox escape due to use-after-free in the Disability Access APIs component. This vulnerability was fixed in Firefox 149, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9. | ||||
| CVE-2026-4691 | 1 Mozilla | 2 Firefox, Firefox Esr | 2026-04-14 | 9.8 Critical |
| Use-after-free in the CSS Parsing and Computation component. This vulnerability was fixed in Firefox 149, Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9. | ||||