| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm_early_create: fix freeing used table on dm_resume failure
If dm_resume fails, the kernel attempts to free table with
dm_table_destroy, but the table was already instantiated with
dm_swap_table. This commit skips the call to dm_table_destroy in this
case. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-log: fix a bitset_size overflow on 32bit machines
Commit c20e36b7631d ("dm log: fix out-of-bounds write due to
region_count overflow") made sure that region_count could fit in an
unsigned int. But the bitmap memory isn't allocated based on
region_count. It uses bitset_size (a size_t variable). The first step of
calculating bitset_size is to set it to region_count, rounded up to a
multiple of BITS_PER_LONG. If region_size is less than BITS_PER_LONG
smaller than UINT_MAX, it will get rounded up to 2^32. On a 32bit
architecture, this will make bitset_size wrap around to 0 and fail,
despite region_count being valid.
Since bitset_size gets divided by 8, it can hold any valid region_count.
It just needs a special case to handle the rollover. If it is 0, the
value rolled over, and bitset size should be set to the number of bytes
needed to hold 2^32 bits. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_skcipher - force synchronous processing on trees without ctx->state
The AIO/async path in skcipher_recvmsg() passes the socket-wide ctx->iv
directly into the skcipher request. After io_submit() the socket lock is
dropped and the request is processed asynchronously, so a concurrent
sendmsg(ALG_SET_IV) can overwrite ctx->iv and make the in-flight request
run under an attacker-controlled IV. For CTR/stream modes this is
IV/keystream reuse and lets an unprivileged user recover the plaintext of
a concurrent operation.
Snapshotting ctx->iv into per-request storage for the async path is not
sufficient. For ciphers with statesize == 0 - which includes cbc and ctr -
the MSG_MORE inter-chunk IV chaining is carried solely by the in-place
req->iv writeback, which a snapshot redirects into per-request memory that
af_alg_free_resources() releases on completion, silently producing wrong
output. Writing the IV back from the completion callback instead is not
possible either: that would require lock_sock() there, but the callback can
run in softirq/atomic context, so it must not sleep.
Make the operation synchronous instead, which removes both the IV race and
any writeback race. This is equivalent to the upstream resolution, commit
fcc77d33a34c ("net: Remove support for AIO on sockets"), which removed the
AIO socket path across net/ entirely and so produces the same end state for
this file. This patch deviates from that commit deliberately: rather than
removing AIO socket support tree-wide, which would be far too invasive for
stable, it removes only the AIO branch in crypto/algif_skcipher.c.
io_submit() now completes synchronously; AF_ALG async is rarely used in
practice.
The -EIOCBQUEUED check in skcipher_recvmsg() is now dead but harmless,
and is left alone to keep the fix minimal.
Tested on 6.6.y: attacker IV injection dropped from 2296/200000 to 0/200000
after the change; MSG_MORE chunked CTR output bit-identical to single-shot. |
| SVGO, short for SVG Optimizer, is a Node.js library and command-line application for optimizing SVG files. From version 1.0.0 until versions 2.8.3, 3.3.4, and 4.0.2, the removeScripts plugin, named removeScriptElement in versions 1 through 3, can leave executable content in optimized SVGs because it does not remove namespaced or prefixed script elements such as <svg:script> and, in versions 3 and 4, matches JavaScript URIs case sensitively. Applications that process untrusted SVG input with this plugin enabled and serve the result can allow scripts to execute when another user opens the SVG, exposing local storage or cookies. This issue is fixed in versions 2.8.3, 3.3.4, and 4.0.2. |
| FileBrowser before 2.63.19 does not account for case-insensitive filesystems when checking home directory ownership during self-registration. When Signup and CreateUserDir are enabled and FileBrowser's root is on a case-insensitive filesystem (confirmed on Windows/NTFS), two self-registered usernames that differ only in letter case (e.g., CaseVictim and casevictim) are stored as distinct accounts but resolve to the same physical home directory, because the scope-ownership check compares the persisted scope as an exact case-sensitive string. A second registrant can therefore read, overwrite, and delete another account's files through authenticated HTTP endpoints, without needing an existing account or victim interaction. |
| Netatalk is a Free and Open Source file server suite for Unix-like operating systems. In versions 3.1.19 through 4.4.2, a stack-based buffer overflow exists in the copydir() function of Netatalk's afpd daemon due to an integer underflow in the calculation of the remaining buffer size used for path construction. copydir() is a utility function called when a file operation crosses a device boundary inside an AFP shared volume, which the standard library's renameat() cannot handle. The function attempts to track available buffer space using srem and drem for source and destination paths. Incorrect arithmetic causes both srem and drem to underflow to SIZE_MAX. Consequently, boundary checks against strlen(de->d_name) always pass, allowing strcpy() to append filenames into nearly full stack buffers. Version 4.4.3 patches the issue. As a workaround, configure each AFP shared volume to be structured as a single file system, in other words no subdirectory of a shared volume should be a mount point for a different file system. |
| A security flaw has been discovered in TOTOLINK A800R 4.1.2cu.5137_B20200730. Affected is the function setWiFiWpsConfig of the file /cgi-bin/cstecgi.cgi of the component wps.so. The manipulation of the argument pin results in stack-based buffer overflow. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. |
| A vulnerability was determined in Tenda AC12 15.03.06.23_multi_TD01. This vulnerability affects the function formSetRebootTimer of the file /goform/SetSysAutoRebbotCfg of the component httpd web management interface. This manipulation of the argument rebootTime causes buffer overflow. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. |
| A security flaw has been discovered in TOTOLINK A800R 4.1.2cu.5137_B20200730. The impacted element is the function setIpQosRules of the file /cgi-bin/cstecgi.cgi of the component firewall.so. The manipulation of the argument Comment results in stack-based buffer overflow. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate extension-frame layout before RX
Extension frames only have the extension header at the regular 802.11
header offset. The generic RX path can still reach helpers and interface
dispatch code that read regular header address fields before unsupported
extension subtypes are dropped.
mac80211 currently only handles S1G beacon extension frames. Drop other
extension subtypes before they can reach regular-header RX processing.
For S1G beacons, linearize the SKB with the management-frame path and
require the fixed S1G beacon header, including optional fixed fields
indicated by frame control, before generic RX dispatch.
Route S1G beacons through the station/default-link RX path without
regular-header station lookup. Avoid regular-header address reads in the
mac80211 RX paths that process S1G extension beacons, including
accept-frame, duplicate-detection, address-copy, and MLO
address-translation paths.
Also make ieee80211_get_bssid() length-safe before returning the S1G
source-address pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ieee80211: validate MLE common info length
ieee80211_mle_common_size() uses the first common-info octet as the
common information length for all known MLE types. However,
ieee80211_mle_size_ok() only validates that octet for Basic, Probe
Request, and TDLS MLEs.
Reconfiguration MLEs also skipped the length octet when calculating the
minimum common size, and Priority Access MLEs skipped validation of the
advertised common information length.
Account for the Reconfiguration common-info length octet and validate
the advertised common information length for all known MLE types. Keep
unknown-type handling unchanged.
[remove now misleading comment] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate EHT MLE before MLD ID read
cfg80211_gen_new_ie() copies ML probe response elements from
the parent frame when the parent EHT multi-link element has an
MLD ID matching the nontransmitted BSSID index.
The code only checked that the extension element had more than
one byte before calling ieee80211_mle_get_mld_id(). That helper
assumes a BASIC MLE with enough common info and documents that
callers must first use ieee80211_mle_type_ok().
Attack chain:
malicious AP sends a short EHT MLE in an MBSSID beacon.
cfg80211_inform_bss_frame_data() stores the copied IE buffer.
cfg80211_parse_mbssid_data() builds the nontransmitted BSS IE.
cfg80211_gen_new_ie() sees the EHT MLE in the parent frame.
ieee80211_mle_get_mld_id() then reads past the IE boundary.
Validate the MLE type and size before reading the MLD ID. This
matches the contract required by the MLE helper and rejects the
short element before any internal MLE fields are accessed. |
| A signed integer overflow in the PCP __pmGetPDU() function can be exploited via crafted network packets during PDU processing or SASL negotiation. This permanently blinds the affected daemon, resulting in a total denial of service (DoS) for subsequent packet reads. |
| An out-of-bounds access issue was addressed with improved bounds checking. This issue is fixed in Safari 26.5.2, iOS 18.7.10 and iPadOS 18.7.10, iOS 26.5.2 and iPadOS 26.5.2, macOS Tahoe 26.5.2, tvOS 26.6, visionOS 26.6, watchOS 26.6. Processing maliciously crafted web content may lead to an unexpected process crash. |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6. Processing a maliciously crafted image may corrupt process memory. |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Tahoe 26.6, visionOS 26.6. An app may be able to cause unexpected system termination or corrupt kernel memory. |
| An out-of-bounds read issue was addressed with improved input validation. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6. A remote attacker may cause an unexpected app termination. |
| A buffer overflow was addressed with improved bounds checking. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Tahoe 26.6. Processing a maliciously crafted file may lead to unexpected app termination or arbitrary code execution. |
| DBI versions before 1.652 for Perl allow a heap out-of-bounds write on 32-bit perl via an integer wraparound in the output buffer size computed by preparse.
preparse reserves its output buffer with `newSV(strlen(statement) * 7 + 16)`, budgeting seven output bytes per input byte for the longest ':p99999' expansion. The product is computed in STRLEN, which is 32 bits wide on a 32-bit perl build, so a statement of 613,566,757 bytes multiplies to 4,294,967,299, wraps modulo 2^32 to 3, and reserves 19 bytes. The parser then copies the statement out through a raw pointer with no capacity check, writing the whole 585 MB input past the end of the allocation. The 99,999 placeholder limit does not bound this path, which is reached by ordinary non-placeholder content.
Any caller that passes an untrusted statement of that length to preparse on a 32-bit perl gets a heap out-of-bounds write of attacker controlled bytes. Builds with a 64-bit STRLEN are not affected, since the wrap there needs a statement of about 2.3 exabytes. |
| A buffer overflow issue was addressed with improved memory handling. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Tahoe 26.6. Processing a 3D model may result in disclosure of process memory. |
