Export limit exceeded: 386951 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (4638 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74489 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix tid_tx use-after-free on BA session stop ieee80211_stop_tx_ba_cb() hands tid_tx to kfree_rcu() through ieee80211_remove_tid_tx(), and then reads tid_tx->ndp after dropping sta->lock: ieee80211_remove_tid_tx(sta, tid); /* kfree_rcu(tid_tx, rcu_head) */ ... spin_unlock_bh(&sta->lock); if (start_txq) ieee80211_agg_start_txq(sta, tid, false); if (send_delba) ieee80211_send_delba(..., tid_tx->ndp); That read is not covered by an RCU read-side critical section, and it runs in preemptible process context: both callers hold the wiphy mutex, reaching it either from the ieee80211_ba_session_work() wiphy work or from ieee80211_sta_tear_down_BA_sessions() during station teardown. Softirqs can run in that window too, both from the local_bh_enable() that ends ieee80211_agg_start_txq() and from any interrupt exit, so the RCU callback can free tid_tx before the read. Driving the function from a test module with the grace period forced into that window, KASAN reports the read, and the free arrives on the ordinary RCU softirq path: BUG: KASAN: slab-use-after-free in ieee80211_stop_tx_ba_cb+0x3cd/0x400 Read of size 1 at addr ffff888002b9f52e by task kworker/0:1/10 [...] Freed by task 57: __kasan_slab_free+0x47/0x70 __rcu_free_sheaf_prepare+0x70/0x250 rcu_free_sheaf_nobarn+0x18/0x40 rcu_core+0x426/0x1310 handle_softirqs+0x144/0x590 __irq_exit_rcu+0xea/0x150 irq_exit_rcu+0x9/0x20 sysvec_apic_timer_interrupt+0x6b/0x80 asm_sysvec_apic_timer_interrupt+0x1a/0x20 send_delba is only set when tx_stop is set, which happens for AGG_STOP_LOCAL_REQUEST alone, so this is reached on local teardown - session idle timeout, PTK rekey, suspend, HW reconfig - and not from a peer's DELBA. Read ndp into a local before the session is freed, while sta->lock is still held. tid_tx->ndp has a single writer, in ieee80211_tx_ba_session_handle_start(), which cannot run concurrently here: both paths are serialised by the wiphy mutex, and the session is already marked HT_AGG_STATE_STOPPING at this point. tid_tx->ndp is also the only tid_tx dereference left after ieee80211_remove_tid_tx() in this function. [move/change the comment a bit to be more general not just on ndp, initialize ndp directly] | ||||
| CVE-2026-74506 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix UAF when sending a message In afs_make_call(), there's a race with async call reception and destruction. If a call is dispatched that doesn't have call->write_iter set (used to specify the data content for FS.StoreData), then the first rxrpc_kernel_send_data() will not set MSG_MORE in the msghdr. Once rxrpc_send_data() queues the last request packet, the response could come in at any time and cause the call to be completed and put. However, afs_make_call() will look at the call again to see it ->write_iter should be handled - something it's only allowed to do if it has its own ref on the call. Whilst this is the case for synchronous calls, it isn't true for async calls such as FS.FetchData. There's also a potential UAF in afs_make_call() in the event that an asynchronous call is being sent, but the call fails in some way (e.g. it gets aborted from the server). The problem there is that afs_make_call() tries to abort a call if the rxrpc send fails, but the asynchronous notification from rxrpc may have caused the afs_call to be torn down. generic/650 plays games with randomly taking CPUs offline, and can interject a significant delay such that the call is deallocated before afs_make_call() gets to check call->write_iter - and a UAF ensues (caught by KASAN). BUG: KASAN: slab-use-after-free in afs_make_call+0x1c90/0x2210 [kafs] Read of size 8 at addr ffff888035e050e8 by task fsstress/1409 Fix this by making afs_make_op_call() give the op->call its own ref rather than transferring the caller's ref to it and then dropping the ref when afs_make_call() returns. This also means that the afs_make_call() func never loses its ref on the call now. | ||||
| CVE-2026-74398 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: addrconf: bail out of dad_failure when state is no longer POSTDAD addrconf_dad_failure() transitions ifp->state from DAD to POSTDAD via addrconf_dad_end(), which drops ifp->lock on return. The lock is re-acquired after net_info_ratelimited(). A concurrent ipv6_del_addr() can take the lock in that window, set ifp->state to DEAD and run list_del_rcu(&ifp->if_list). addrconf_dad_failure() then overwrites DEAD with ERRDAD at errdad: and schedules a new dad_work. The work calls ipv6_del_addr() again, hitting the already-poisoned list entry: general protection fault: 0000 [#1] SMP NOPTI CPU: 4 PID: 217 Comm: kworker/4:1 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:ipv6_del_addr+0xe9/0x280 RAX: dead000000000122 Call Trace: addrconf_dad_stop+0x113/0x140 addrconf_dad_work+0x28c/0x430 process_one_work+0x1eb/0x3b0 worker_thread+0x4d/0x400 kthread+0x104/0x140 ret_from_fork+0x35/0x40 Fold the addrconf_dad_end() logic into addrconf_dad_failure() under a single ifp->lock critical section. The STABLE_PRIVACY branch temporarily drops ifp->lock around address regeneration, so at lock_errdad: verify the state is still POSTDAD before transitioning to ERRDAD; bail out otherwise to avoid overwriting a state set by another path while the lock was released. | ||||
| CVE-2026-74374 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: fix error-path detection with md_cloned_bio() Detect the error path using md_cloned_bio() instead of relying on r1_bio in raid1 or r10_bio->read_slot in raid10, which may be NULL or -1 after splitting and resubmitting a failed bio. As a result, the error path may not be recognized and memory allocations can incorrectly use GFP_NOIO instead of (GFP_NOIO | __GFP_HIGH), which can lead to a deadlock under memory pressure. | ||||
| CVE-2026-74440 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Wait on external BO kernel fences in exec IOCTL Before arming a user job, xe_exec_ioctl() only added the VM's dma-resv KERNEL slot as a dependency. That slot covers rebinds and the kernel operations of the VM's private BOs, but not external BOs (bo->vm == NULL), which carry their kernel operations (evictions, moves, ...) in their own dma-resv KERNEL slot. The DMA_RESV_USAGE_KERNEL slot is the cross-driver contract for memory management operations that must complete before the BO or its backing store may be used: any accessor is required to wait on the KERNEL fences before touching the resv. By skipping the external BOs' KERNEL slots, the exec path violated that contract and could schedule a user job while a kernel operation on an external BO mapped by the VM was still in flight, racing against it and potentially reading or writing memory that was being moved. Replace the VM-only dependency with an iteration over every object locked by the exec, adding each object's KERNEL slot as a job dependency. This covers the VM resv (rebinds and private BOs) as well as every external BO, mirroring the drm_gpuvm_resv_add_fence() call that later publishes the job fence to the same set of objects. Long-running mode continues to skip this, as before. (cherry picked from commit a6b842acf3ddd1efc53a56de9260cfa718fb35e7) | ||||
| CVE-2026-61927 | 1 Microsoft | 8 Windows 11 24h2, Windows 11 24h2, Windows 11 25h2 and 5 more | 2026-08-17 | 7 High |
| Use after free in Windows Bind Filter Driver allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-62690 | 1 Microsoft | 18 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 15 more | 2026-08-17 | 7 High |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Push Notifications allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-62908 | 1 Microsoft | 26 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 23 more | 2026-08-17 | 7 High |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Backup Engine allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-13197 | 1 Kunbus | 1 Picontrol | 2026-08-17 | N/A |
| Nozomi Networks Labs identified a CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in the configuration and process-image management functionality of KUNBUS piControl in version 2.6.2 that allows a local authenticated attacker to trigger use-after-free and invalid pointer dereferences on kernel configuration objects, resulting in kernel memory corruption and denial of service, by issuing concurrent crafted requests through the piControl character device. | ||||
| CVE-2026-13198 | 1 Kunbus | 1 Picontrol | 2026-08-17 | N/A |
| Nozomi Networks Labs identified a CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in the event notification functionality of KUNBUS piControl in version 2.6.2 that allows a local authenticated attacker to corrupt kernel heap and event-list state and disclose a small amount of adjacent kernel memory, resulting in kernel memory corruption and denial of service, by issuing concurrent crafted requests from multiple threads through the piControl character device. | ||||
| CVE-2026-74439 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before tearing down scalable-mode context entry device_pasid_table_teardown() zeroes the 128-bit scalable-mode context entry with context_clear_entry() while the Present bit is still set. This creates a window where the hardware can fetch a torn entry, with some fields already zeroed while Present is still set, leading to unpredictable behavior or spurious faults. The context-cache invalidation is issued only after the entry has been zeroed, and intel_pasid_free_table() then frees the PASID directory pages, so the IOMMU can keep walking a stale Present=1 entry that points at freed memory. While x86 provides strong write ordering, the compiler may reorder the two 64-bit writes to the entry, and the hardware fetch is not guaranteed to be atomic with respect to multiple CPU writes. Commit c1e4f1dccbe9d ("iommu/vt-d: Clear Present bit before tearing down context entry") fixed this exact pattern in domain_context_clear_one() and the copied-context path, but device_pasid_table_teardown() was not converted. Align it with the "Guidance to Software for Invalidations" in the VT-d spec, Section 6.5.3.3, using the same ownership handshake as the sibling fix: clear only the Present bit, flush it to the IOMMU, perform the context-cache invalidation, and only then zero the rest of the entry. | ||||
| CVE-2026-74330 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: configfs: fix lockless traversals of ->s_children Having the parent directory locked protects entries from removal by another thread, but it does *not* protect cursors from being moved around by lseek() - or freed, for that matter. | ||||
| CVE-2026-72462 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix race in unix socket mediation when peer_path is used The holding a reference to the peer_sk is not enough to ensure access to the peer sk path. Accessing the path outside of the state lock allows for a race with unix_release_sock(). Fix this by taking the state lock and getting a reference to the path under lock. Ideally for connected sockets we would cache this information so we don't have to take the lock here. But for now just fix the race. | ||||
| CVE-2026-72372 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix lack of locking around modifications of net->cells_dyn_ino Fix the lack of locking around modifications of net->cells_dyn_ino by taking net->cells_lock exclusively. This also requires to cell to be removed from net->cells_dyn_ino in afs_destroy_cell_work() rather than in afs_cell_destroy() as the latter runs in RCU cleanup context and sleeping locks cannot be taken there. | ||||
| CVE-2026-72221 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: wait for in-flight TLS handshake callback when cancel loses race When wait_for_completion_interruptible_timeout() in svc_tcp_handshake() returns 0 (timeout) or -ERESTARTSYS (signal) and tls_handshake_cancel() then returns false, handshake_complete() has won the cancellation race: it has set HANDSHAKE_F_REQ_COMPLETED and is about to invoke svc_tcp_handshake_done(), but the callback's side effects on xpt_flags and on svsk->sk_handshake_done have not yet committed. The current code reads xpt_flags immediately to decide whether the session succeeded. Two races result. If the callback has executed set_bit(XPT_TLS_SESSION) but not yet clear_bit(XPT_HANDSHAKE), svc_tcp_handshake() sees a session, enqueues the transport, and returns. svc_xprt_received() then clears XPT_BUSY, a worker thread picks the transport up, the dispatcher in svc_handle_xprt() observes XPT_HANDSHAKE still set, and xpo_handshake is invoked a second time. That svc_tcp_handshake() calls init_completion(&svsk->sk_handshake_done) while the original callback concurrently calls complete_all() on it, corrupting the embedded swait_queue. If the callback has set HANDSHAKE_F_REQ_COMPLETED but not yet entered svc_tcp_handshake_done(), svc_tcp_handshake() reads XPT_TLS_SESSION as clear and tears the connection down even though the handshake is about to succeed. Wait for the callback to commit before inspecting xpt_flags. The completion is guaranteed to fire because handshake_complete() invokes svc_tcp_handshake_done() unconditionally once it has set HANDSHAKE_F_REQ_COMPLETED. | ||||
| CVE-2026-74504 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix division by zero in initialize_timer() A userspace-driven ALSA timer (SND_UTIMER) lets an unprivileged user set the backing snd_timer's hardware resolution to an arbitrary 64-bit value via SNDRV_TIMER_IOCTL_CREATE. snd_utimer_create() only rejects zero. When such a timer is bound to a sequencer queue, initialize_timer() computes the tick period as tmr->ticks = 1000000000 / (r * freq); where r is that user-controlled resolution and freq is the sequencer update rate in Hz, clamped to MIN_FREQUENCY..MAX_FREQUENCY (10..6250). A resolution of 2^63 makes the 64-bit product r * freq wrap to zero for any even freq, including DEFAULT_FREQUENCY (1000), so the division faults with a divide-by-zero. The division runs under tmr->lock with interrupts disabled, so the oops leaves the spinlock held and hangs the CPU. It is reachable by an unprivileged user with access to /dev/snd/timer and /dev/snd/seq. Oops: divide error: 0000 [#1] SMP KASAN PTI CPU: 7 UID: 1000 PID: 456 Comm: alsa_seq_utimer Not tainted 7.2.0-rc4+ RIP: 0010:initialize_timer.constprop.0+0x20a/0x2d0 snd_seq_timer_start+0x15e/0x2b0 snd_seq_control_queue+0x56f/0xba0 snd_seq_write+0x3e0/0x730 Reject an overflowing product with check_mul_overflow() and fall back to a single tick, which also avoids feeding a wrapped-but-nonzero divisor (e.g. 2^63 * 1000 mod 2^64 == 0, or other resolutions wrapping to a small value) into the period computation. | ||||
| CVE-2026-72414 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: round up PTP perout pin duration pin_duration is converted from the user-provided period to SJA1105 clock ticks and is later passed as the cycle_time argument to future_base_time(). Very small period values may become zero after the conversion, which can lead to a division by zero in future_base_time(). Round zero pin_duration up to 1 tick so that the smallest unsupported periods use the minimum non-zero hardware duration instead of passing zero to future_base_time(). | ||||
| CVE-2026-72394 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (aspeed-g6-pwm-tach) Guard fan RPM calculation against divide-by-zero Sashiko reports: In the aspeed-g6-pwm-tacho driver, the aspeed_tach_val_to_rpm() function calculates the fan RPM using the tachometer value. However, it does not check if the tachometer value is zero before performing the division. If the hardware reports a tachometer value of 0 (which can happen due to an extremely fast pulse, a stuck edge, or a hardware glitch), the calculated tach_div evaluates to 0. The subsequent call to do_div() with tach_div as the divisor triggers a divide-by-zero exception, leading to a kernel panic. Check the divisor against zero to fix the problem. | ||||
| CVE-2026-72365 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix writethrough to use collection offload Fix writethrough write to set NETFS_RREQ_OFFLOAD_COLLECTION on the request so that collection is processed asynchronously rather than only right at the end - and also so that asynchronous O_SYNC writes get collected at all. | ||||
| CVE-2026-72238 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/boot: Validate console=uart8250 baud rate to fix early boot hang When the baud rate is empty, 0, invalid, or overflows to 0 when stored as an int, the system will hang during early boot because of a division by zero in early_serial_init(). Fall back to DEFAULT_BAUD when the resulting baud rate is 0 to prevent an early system hang. | ||||