Export limit exceeded: 414013 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 414013 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 414013 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (414013 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99078 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent stale XSK buffer release on MPWQE refill retry With AF_XDP on a striding RQ, mlx5e defers releasing XSK buffers until an MPWQE is refilled. If XSK allocation then returns -ENOMEM, actual_wq_head is not advanced and a later NAPI poll retries the same WQE. mlx5e_free_rx_mpwqe() leaves each released slot marked as releasable. On retry it can therefore call xsk_buff_free() again through stale pointers after the frames have returned to the XSK pool and been reallocated. Set all skip_release_bitmap bits in the common error path of mlx5e_xsk_alloc_rx_mpwqe(). This matches mlx5e_alloc_rx_mpwqe(). A successful allocation already clears the bitmap after replacing every buffer, so retries become idempotent without changing the success path. Fault injection forced three consecutive failures for one selected MPWQE. Both an early allocation failure and a partial 8-of-16-buffer unwind released the original 16 XSK buffers only once. Each error left a full bitmap, the following NAPI retry skipped the release, and a later successful allocation cleared it. A 20-second AF_XDP zero-copy pressure run exercised 1,575,262 buffer allocation failures without invalid descriptors, WQE errors, or kernel warnings. | ||||
| CVE-2026-99083 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix heap out-of-bounds write in krb5_authenticate() In krb5_authenticate(), out_len is calculated to determine available headroom in response_buf for the incoming Kerberos AP-REP token. However, when SMB2_SESSION_SETUP is processed as a non-first element of a compounded SMB2 request, the calculation omits work->next_smb2_rsp_hdr_off. This causes out_len to overstate remaining buffer headroom by the cumulative size of prior responses in the compound chain. Consequently, the length check in ksmbd_krb5_authenticate() (*out_len <= resp->spnego_blob_len) passes erroneously, allowing memcpy() to write the AP-REP blob past the end of response_buf into adjacent kernel heap memory. Fix this by subtracting work->next_smb2_rsp_hdr_off when computing out_len, ensuring it accurately reflects physical remaining buffer space. | ||||
| CVE-2026-99084 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: readdir: take no inode lock on an immutable directory iterate_dir() takes the directory's i_rwsem shared and holds it across ->iterate_shared(). For a directory that never has an entry and is never removed the lock keeps nothing still, it only orders every reader and every writer of that inode behind each other. For the directory of a nullfs instance that matters. The instance of the initial mount namespace is the root of every empty mount namespace and the private instance is the root of every kernel thread, so one inode is shared across users who have nothing else in common. And a reader can hold the lock for as long as it likes: back the getdents() buffer with a mapping of a file on a FUSE mount of your own, let the copy of "." and ".." fault and let the server wait. Queue an exclusive taker behind it, a mkdir() in that directory goes through start_dirop() before the read-only mount is reported, and from then on every lookup that misses the dcache in that directory, every create and every mount on it waits until the server answers. One user of an empty mount namespace stalls all the others. Add FOP_IMMUTABLE for the file operations of a directory that never changes and is never removed and let iterate_dir() skip the lock for it. The flag never changes for a file, ->f_pos is protected by f_pos_lock since directories are FMODE_ATOMIC_POS, IS_DEADDIR can't be set on such a directory and neither touch_atime() nor fsnotify take i_rwsem. Set it on the nullfs directory. The placeholder directories of libfs never have an entry either but their owners remove them, so they keep the lock. | ||||
| CVE-2026-79866 | 2026-10-24 | 9.6 Critical | ||
| An unauthenticated path traversal vulnerability exists in the PAPI protocol in AOS-8. Successful exploitation of this vulnerability could allow an unauthenticated adjacent attacker to read, modify, and delete files on the underlying operating system. | ||||
| CVE-2026-99086 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm-integrity: validate the superblock on resume dm_integrity_resume() re-reads the superblock from the device so that it picks up the flags and the recalculate position. It performs no validation on the result, while the constructor validates the superblock it reads and sizes all the in-memory structures according to it. The user may modify the superblock on the underlying device while the dm-integrity device is suspended, so that the two no longer agree. In particular, access_journal_data() shifts the journal entry index by ic->sb->log2_sectors_per_block, while ic->journal_section_sectors and the journal page list were computed with the value that was present at constructor time. Increasing log2_sectors_per_block makes the index run past the end of the journal, and dm-integrity then writes 512 bytes through lowmem_page_address(NULL). Snapshot the validated superblock in the constructor and refuse to resume if any of the fields that describe the on-disk geometry changed. | ||||
| CVE-2026-115729 | 1 Pdfme | 1 Common | 2026-10-24 | 6.8 Medium |
| @pdfme/common from 5.5.10 before 6.2.6 contains a server-side request forgery vulnerability that allows attackers to bypass the isUrlSafeToFetch denylist in getB64BasePdf. Attackers can supply basePdf URLs using IPv4-mapped IPv6, [::], NAT64 or localhost alias hostnames to read loopback, internal or cloud metadata responses through generated documents. | ||||
| CVE-2026-115730 | 1 I18next | 1 I18next-http-backend | 2026-10-24 | 3.1 Low |
| i18next-http-backend 4.0.2 contains an incomplete fix in interpolateUrl() that allows attackers to redirect translation requests by supplying an ns value starting with a slash. Attackers controlling the namespace value can form a protocol-relative URL in loadPath or addPath templates to load attacker-hosted translations, enabling UI content injection and cross-site scripting. | ||||
| CVE-2026-115752 | 1 Signalk | 2 Signal K Server, Signalk-server | 2026-10-24 | 4.2 Medium |
| Signal K Server from 2.28.0-beta.2 before 2.34.0 contains a server-side request forgery vulnerability in the App Store icon fetcher that trusts absolute signalk.appIcon URLs. Attackers publishing npm packages with Signal K keywords can make servers request loopback, vessel network, or cloud metadata endpoints, storing image-typed responses served back via the admin UI. | ||||
| CVE-2026-115892 | 1 Bytecodealliance | 1 Wasmtime | 2026-10-24 | 5.5 Medium |
| Wasmtime is a runtime for WebAssembly. From 46.0.0 until 48.0.7 and 49.0.4, lowering a host-created component-model stream or future into a guest can omit a required payload-type check after the value passes through guest code and returns through StreamAny, FutureAny, Val::Stream, Val::Future, or an equivalent typed reader. A malicious guest that controls exported function types or returned values can cause the host to pass the type-erased value to a guest expecting a different payload type, which panics the Wasmtime host. This issue is fixed in versions 48.0.7 and 49.0.4. | ||||
| CVE-2026-91407 | 2 Oracle, Oracle Corporation | 2 Identity Manager, Oracle Identity Manager | 2026-10-23 | 8.8 High |
| Vulnerability in the Oracle Identity Manager product of Oracle Fusion Middleware (component: REST WebServices). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.1.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Identity Manager. Successful attacks of this vulnerability can result in takeover of Oracle Identity Manager. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-79881 | 1 Hpe | 1 Aos | 2026-10-23 | 8.5 High |
| An authentication bypass vulnerability in the underlying operating system of AOS-8 could allow an unauthenticated remote attacker to circumvent existing authentication controls. Successful exploitation could allow an attacker to execute arbitrary code as a privileged user on the underlying operating system leading to complete system compromise. | ||||
| CVE-2026-79882 | 2026-10-23 | 8.3 High | ||
| There is a command injection vulnerability in the PAPI protocol of AOS-10 that could lead to unauthenticated remote code execution by an adjacent attacker sending specially crafted packets. Successful exploitation of this vulnerability could allow an attacker to execute arbitrary code as a privileged user on the underlying operating system. | ||||
| CVE-2026-97298 | 2 Kingaddons, Wordpress-extensions | 2 King Addons For Elementor, King Addons For Elementor | 2026-10-23 | 6.5 Medium |
| Contributor Cross Site Scripting (XSS) in King Addons for Elementor <= 51.1.86 versions. | ||||
| CVE-2026-93640 | 1 Zimbra | 1 Zimbra Collaboration Suite | 2026-10-23 | 7.8 High |
| A local privilege escalation vulnerability in the optional dnscache package of Zimbra Collaboration Suite (ZCS) allows the Unix zimbra account to access files with root privileges. The passwordless sudo policy permits arbitrary arguments to zmunbound, whose wrapper forwards them to Unbound without restricting the configuration path. An attacker can supply a configuration that retains root privileges and disables the chroot. Include directives expose root-readable file contents through parser errors, while an attacker-selected logfile path creates a root-owned file or appends Unbound log records to an existing file. This can disclose password hashes and private keys and corrupt privileged configuration files, preventing affected services from starting with the modified configuration. The affected configuration is present in ZCS 10.1.16 and 10.1.21 dnscache packages. | ||||
| CVE-2026-55442 | 1 Intranda | 1 Goobi Viewer Core | 2026-10-23 | 5.3 Medium |
| The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 23.03 to before version 26.05, SolrTools.cleanUpQuery() strips Solr local-parameter syntax ({!...}) from user-supplied query strings before they reach Solr. Its regex can be bypassed by wrapping the local parameter in a second pair of curly braces ({{!...}}): the outer braces are stripped, the inner {!...} survives intact, and a valid Solr local parameter is forwarded. The flaw is in the shared sanitizer, so it affects any endpoint that routes user input through cleanUpQuery. The double-brace bypass applies from v23.10 (the greedy \{(.+)\} regex); a related bare-!join rewrap path is present. This issue has been patched in version 26.05. | ||||
| CVE-2026-46346 | 1 Intranda | 1 Goobi Viewer Core | 2026-10-23 | 6.5 Medium |
| The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, the password reset token is predictably based on the time of the reset request. An attacker who knows the target's email address can request a reset and then brute-force the token. Exploiting this finding alone forces an unauthorized password reset on any account. This issue has been patched in version 26.05. | ||||
| CVE-2026-55459 | 1 Intranda | 1 Goobi Viewer Core | 2026-10-23 | 7.4 High |
| The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 25.01 to before version 26.05, AuthenticationEndpoint.verifyOpenIdToken builds its verifier as JWT.require(algorithm).withIssuer(issuer).build() and does not enforce the aud claim during cryptographic validation. The aud check is performed manually afterwards via a single string-equality call, which only handles single-string aud values. In a multi-RP IdP setup, a token whose single-string aud matches the viewer's client ID but was issued for a different relying party passes the check and authenticates the attacker as the token's sub. This issue has been patched in version 26.05. | ||||
| CVE-2026-39902 | 1 Cacti | 1 Cacti | 2026-10-23 | 7.2 High |
| Cacti is an open source performance and fault management framework. Prior to version 1.2.31, the prior blocklist ([;&| `$\\n\r]) omitted single-quote, double-quote, redirect operators, subshell parens and braces. An authenticated admin could save an input_string` containing single-quote, redirect operator, or subshell parens, and pass the check. This issue has been patched in version 1.2.31. | ||||
| CVE-2026-115845 | 1 Aws | 2 Aws-mcp-server, Aws Mcp Server | 2026-10-23 | 6.4 Medium |
| An incomplete list of disallowed inputs in the Python code validator of the run_script tool in AWS MCP Server might allow an authenticated remote user to execute arbitrary code within their own isolated session environment via a crafted script. AWS fixed this issue service-side. No customer action is required. | ||||
| CVE-2026-115572 | 1 Py-pdf | 1 Pypdf | 2026-10-23 | 5.5 Medium |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.21.2, an attacker can craft a PDF that repeatedly references the same nonexistent indirect object, causing relevant file parts such as pages to trigger repeated full-file recovery loads and long runtimes when accessed. This issue is fixed in version 6.21.2. | ||||