| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Set the trace clock before registering the histogram trigger
hist_register_trigger() puts the trigger on the global named_triggers
list in cmd_ops->init(), and only then sets the trace clock:
if (data->cmd_ops->init) {
ret = data->cmd_ops->init(data);
if (ret < 0)
goto out;
}
if (hist_data->enable_timestamps) {
ret = tracing_set_clock(file->tr, hist_data->attrs->clock);
if (ret) {
hist_err(tr, HIST_ERR_SET_CLOCK_FAIL, errpos(clock));
goto out;
}
The clock string is not checked anywhere before that call, so a named
trigger using common_timestamp with an unknown clock fails after it has
already become findable. event_hist_trigger_parse() then frees it
without taking it off the list, and the next lookup by name reads the
freed object:
~# cd /sys/kernel/tracing/events/sched/sched_switch
~# echo 'hist:name=foo:keys=common_pid:ts=common_timestamp:clock=bogus' > trigger
bash: echo: write error: Invalid argument
~# echo 'hist:name=foo:keys=common_pid' > trigger
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff88800915d760 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0x900
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 63:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Set the clock before the trigger is registered, so that nothing which
can fail runs after it is published, the way commit 6f86bdeab633
("tracing: Fix bad hist from corrupting named_triggers list") moved the
registration below the rest of the setup.
tracing_set_filter_buffering() is reference counted, so the init failure
path has to drop the reference that the clock block now takes first. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Acquire init_mm write lock on collapse to avoid UAF
x86 implements page attribute modification using its Change Page
Attributes (CPA) mechanism.
This tracks properties of ranges such as cache mode through x86 page
attributes, and as part of that logic manipulates kernel page tables.
Since commit:
41d88484c71c ("x86/mm/pat: restore large ROX pages after fragmentation")
ranges of kernel page table entries can be collapsed into
huge page table entries as part of this logic.
As part of this collapse, it frees the page tables which the collapsed
entries previously pointed to, and it does so without any relevant locks
being held to preclude concurrent kernel page table walkers.
The only way this code can be reached is if CPA_COLLAPSE is specified, and
this is only set in set_memory_rox() via:
set_memory_rox()
-> change_page_attr_set_clr()
-> cpa_flush()
-> cpa_collapse_large_pages()
Notable users of this are execmem and BPF when manipulating executable
mappings.
However, this is problematic for ptdump as it walks ranges it does not own
and thus runs the risk of a use-after-free on page tables freed underneath
it.
In addition, concurrent CPA collapse operations are possible which can also
cause races.
Resolve the issue by acquiring the mmap write lock on init_mm across the
whole operation.
It is safe to acquire a sleeping lock as all the callers invoke
set_memory_rox() from process context and in any case,
change_page_attr_set_clr() calls vm_unmap_alias() which ultimately takes a
mutex, disallowing atomic context here. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix out-of-bounds write in l2cap_ecred_connect
l2cap_chan_connect() tries to ensure there are no more than
L2CAP_ECRED_CONN_SCID_MAX pending ECRED channels, so they fit in the
same L2CAP_ECRED_CONN_REQ that l2cap_ecred_connect() constructs.
However, the check only counts deferred channels. If 6 L2CAP sockets
are connected at the same time in order DDDDND (D=deferred,
N=non-deferred), the last can bump the total to max+1. It results to
one __le16 written out of bounds of the scid array, and an invalid
ECRED_CONN_REQ being sent.
Fix by leaving room for the non-deferred pending ECRED channels in the
counting in l2cap_chan_connect(), so the limit can't be exceeded.
Move counting under same critical section where the channel is added.
Although race conditions involving this appear unreachable, it's easier
to see.
Also add WARN_ON_ONCE check in l2cap_ecred_defer_connect() to make this
less brittle. |
| HFS2 version 2.4.0 and earlier contains an unauthenticated arbitrary file access vulnerability that allows unauthenticated attackers to read, write, append, and delete files anywhere the HFS service account has filesystem access outside the shared folder. Attackers can exploit the macro dispatcher's lack of authorization model combined with the path resolver's failure to confine absolute paths to manipulate the template engine and compromise the confidentiality, integrity, and availability of the host. |
| Apache Airflow's `/assets/events` API returned asset events for every Dag in the deployment, with no filter restricting them to the Dags the caller is authorized to read. Any authenticated user holding asset-read access could therefore enumerate asset events — including the source Dag ID, task ID, run ID and event timestamps — for Dags they have no permission to see. Because the filter was also absent from the count query, `total_entries` and pagination disclosed the existence of hidden Dags even without inspecting individual rows. Deployments are affected whenever per-Dag access control is used to separate teams or tenants; no special configuration is required. Upgrade to apache-airflow 3.3.2 or later. |
| Apache Airflow: the Core API logout endpoint revokes only a session token presented as the _token cookie. When a client logs out presenting its credential as an Authorization bearer header instead, the endpoint returns its normal logout response but revokes nothing, so the token remains valid until it expires. An attacker who already holds a copy of that token keeps the victim's access after the victim has logged out and believes the session ended; the default token lifetime is 24 hours and is configurable.
Affects API clients that authenticate with a bearer token rather than the browser session cookie. The attacker must already possess a copy of a valid token; obtaining one is outside the scope of this issue, and no privileges beyond the victim's own are gained.
Users of apache-airflow are recommended to upgrade to apache-airflow version 3.3.2 or later, which fixes the issue. |
| Heap-based buffer overflow in Windows BitLocker allows an authorized attacker to execute code locally. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: flowlabel: cap duplicate leases per socket
ipv6_flowlabel_get() allocates an ipv6_fl_socklist entry for every
successful GET. The recheck path for a compatible existing flowlabel
links another lease without applying any lease admission check. Repeated
GET requests for one shareable label can therefore grow a socket's lease
list without bound.
Reject a new unprivileged lease once the socket already holds
FL_MAX_PER_SOCK leases. Check this on the shared recheck path so reuse
of a globally interned label, including the fl_intern() collision path,
is covered as well. New-label admission remains under the existing
mem_check() policy.
Use capable(CAP_NET_ADMIN) rather than ns_capable(), matching
mem_check(). An unprivileged user must not bypass the cap by creating a
user namespace and a netns where they have CAP_NET_ADMIN, which would
still consume host memory.
Check the capability only when the socket reaches the limit, so
successful unprivileged GET requests below the cap do not generate a
capability audit. Do the admission check before updating linger and
expires so a rejected GET does not refresh the shared label, matching
the existing socket-list allocation failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: fib: bound automatic table ID allocation
fib_empty_table() probes every table ID from 1 until it finds a
free one. IPv4 tables are stored in a 256-bucket hash table, so a
dense set of IDs makes each probe walk a growing hash chain while
RTNL is held.
Automatic table assignment ("ip rule ... table 0") is an IPv4-only
legacy path. Bound the automatically allocated ID to 4096 so the
RTNL hold stays bounded, without changing lookups of explicitly
specified table IDs.
This changes user-visible behavior. A table-0 rule previously
received the lowest free ID in 1..RT_TABLE_MAX (0xFFFFFFFF). After
this patch the search stops at 4096 and the rule add fails with
ENOBUFS if that range is fully occupied. Explicit table IDs above
4096 remain usable.
The automatic path is unused in practice: it is IPv4-only, not
documented by ip-rule, uncovered by kernel selftests, and both
NetworkManager and systemd refuse table 0. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: hwsim: serialize pib updates to fix double-free
hwsim_update_pib() does an unserialized read-swap-free of phy->pib:
pib_old = rtnl_dereference(phy->pib);
...
rcu_assign_pointer(phy->pib, pib);
kfree_rcu(pib_old, rcu);
It assumes the RTNL is held, but ->set_channel is not always called
under it: the mac802154 scan worker changes channels via
drv_set_channel() without the RTNL. Such an update can race an
RTNL-held one on the same phy; both read the same pib_old and both
kfree_rcu() it, double-freeing the object. With SLUB percpu sheaves
batching kfree_rcu(), this surfaces as a KASAN invalid-free in
rcu_free_sheaf().
struct hwsim_phy has no lock for pib. Add one and make the swap atomic
with rcu_replace_pointer() under it, dropping the misleading
rtnl_dereference(). |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: cc2520: fix FIFOP work use-after-free
The FIFOP interrupt handler queues cc2520_fifop_irqwork. On removal,
cc2520_remove() only flushes the work. The devm-managed FIFOP IRQ
remains active until after ->remove() returns and can queue the work
again after that flush, allowing it to run after the private data is
released.
Disable the work with disable_work_sync() instead of flushing it, so
the handler can no longer queue it once removal begins. Destroy the
buffer mutex last, since the worker and the stop callback invoked
through ieee802154_unregister_hw() both take it.
Found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: disable DIM work before freeing q_vectors
idpf never drains the Tx/Rx DIM works before freeing the memory they
live in. tx_dim and rx_dim are embedded in struct idpf_q_vector, they
are queued from the NAPI poll via net_dim(), and idpf_vport_intr_rel()
ends with kfree(rsrc->q_vectors). Nothing in the driver cancels them.
idpf_tx_dim_work() and idpf_rx_dim_work() then run on freed memory:
idpf_vport_intr_write_itr() writes the ITR register through
q_vector->intr_reg.tx_itr / rx_itr, void __iomem pointers loaded out of
the freed q_vector. No configuration is needed to get there --
IDPF_ITR_IS_DYNAMIC() is defined as (itr_mode) and idpf_vport_alloc()
initialises both modes to IDPF_ITR_DYNAMIC.
Draining after idpf_vport_intr_napi_dis_all() is not enough on its own.
idpf_net_dim() is called from inside the
"if (napi_complete_done(napi, work_done))" branch of the poll, and
napi_complete_done() has already cleared NAPIF_STATE_SCHED by then.
napi_disable_locked() waits only while (val & (NAPIF_STATE_SCHED |
NAPIF_STATE_NPSVC)), so napi_disable() can return while the poll tail is
still queueing the work, and a plain cancel_work_sync() would be
re-armed behind the drain.
Use disable_work_sync(): schedule_work() on a work with a non-zero
disable count is dropped by clear_pending_if_disabled() before
__queue_work() is reached.
Move idpf_init_dim() to idpf_vport_intr_alloc() so the works are
initialised on every path that can reach the drain -- the three
"goto intr_deinit" sites between idpf_vport_intr_init() and
idpf_vport_intr_ena() get there without the enable side having run.
Nothing re-enables them: rsrc->q_vectors is freed on every exit from
idpf_vport_open() and on every idpf_vport_stop(), so the count dies with
the object.
It is a race, not a deterministic failure -- net_dim() only schedules
once DIM_NEVENTS events have accumulated and the profile index changes.
A KASAN ifup/ifdown loop under load is the way to see it. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa: ifcvf: Put device on unsupported feature error
Route unsupported provisioned features through the common error path after
vdpa_alloc_device() so the allocated device and adapter pointer are
released consistently. |
| In the Linux kernel, the following vulnerability has been resolved:
igmp: convert struct ip_sf_list to RCU
Commit 23d2b94043ca ("igmp: Add ip_mc_list lock in ip_check_mc_rcu")
added spin_lock_bh(&im->lock) to ip_check_mc_rcu() to prevent a
use-after-free while iterating im->sources during concurrent deletions.
However, ip_check_mc_rcu() is called from RCU read-side critical
sections in packet receive and route lookup fast paths (e.g.
__mkroute_output(), ip_route_input_rcu(), and __udp4_lib_rcv()).
When igmpv3_send_cr() or igmpv3_send_report() holds &pmc->lock and
calls add_grec() -> igmpv3_newpack() -> ip_route_output_ports(),
an XFRM policy matching a multicast destination triggers
xfrm_tmpl_resolve_one() -> xfrm4_get_saddr() -> __mkroute_output() ->
ip_check_mc_rcu(). This attempts to acquire &im->lock while &pmc->lock
is already held on the same CPU, triggering a lockdep recursive locking
warning / deadlock.
Fix this by converting IPv4 struct ip_sf_list to RCU, mirroring the
IPv6 implementation in net/ipv6/mcast.c:
1. Add struct rcu_head to struct ip_sf_list and annotate sf_next,
sources, and tomb as __rcu pointers.
2. Use rcu_assign_pointer() and kfree_rcu() for list updates and
deletions.
3. Remove spin_lock_bh(&im->lock) from ip_check_mc_rcu() and traverse
im->sources locklessly with for_each_psf_rcu(), reading and writing
counter fields with READ_ONCE() and WRITE_ONCE().
Note: RCU conversion of /proc/net/mcfilter will be done in a
separate patch. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix readahead synchronisation issues by loading all folios upfront
There are some synchronisation issues that derive from the app thread
adding more folios to the rolling buffer whilst the collector thread is
looking at them or trying to clear them, such as determining the setting of
front_folio_order when the next folio hasn't been added yet,
The reason for the rolling buffer approach is that loading the buffer
upfront and then dropping all the refs just acquired is quite a slow
operation, and loading progressively allows some of the cost to be deferred
until after at least some of the I/O is started.
Instead, a better way is to load all the folios into the rolling buffer
upfront - and then drop the refs later, once the I/O is in progress. (Even
better would be for the refs not to be there at all.)
Fix this by changing the rolling buffer loader to load all the folios
selected by the VM for readahead upfront into the folio queue. The folio
queue is allocated a batch worth at a time as we don't know how many folios
are involved (the readahead_control struct, alas, has a page count, not a
folio count).
The folio refs acquired from readahead are then dropped in bulk once the
first subrequest is dispatched as it's quite a slow operation. The
collector waits for NETFS_RREQ_NEED_PUT_RA_REFS to be cleared so that it
doesn't unlock folios before the xarray has been scanned for them.
This simplifies the buffer handling later and isn't noticeably slower as
the xarray doesn't need to be modified and the folios are all already
pre-locked. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: break unbuffered write when netfs_alloc_subrequest() fails
syzbot reported a null-ptr-deref below [1] following a fault injection in
netfs_alloc_subrequest(). [0]
When netfs_alloc_subrequest() fails, subreq is NULL.
Later, netfs_prepare_write() tries to initialize members of
subreq(e.g., source), the issue in [1] is triggered.
Let's handle the error of netfs_prepare_write() properly.
[0]
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
Call Trace:
netfs_alloc_subrequest+0x116/0x3f0
netfs_prepare_write+0x76/0x7b0
netfs_unbuffered_write+0x75c/0x2020
netfs_unbuffered_write_iter_locked+0x7d6/0xa80
netfs_unbuffered_write_iter+0x442/0x720
v9fs_file_write_iter+0xbf/0x100
vfs_write+0x6ac/0x1050
[1]
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
RIP: 0010:netfs_prepare_write+0xbc/0x7b0 fs/netfs/write_issue.c:173
Call Trace:
netfs_unbuffered_write+0x75c/0x2020 fs/netfs/direct_write.c:111
netfs_unbuffered_write_iter_locked+0x7d6/0xa80 fs/netfs/direct_write.c:290
netfs_unbuffered_write_iter+0x442/0x720 fs/netfs/direct_write.c:382
v9fs_file_write_iter+0xbf/0x100 fs/9p/vfs_file.c:409
new_sync_write fs/read_write.c:595 [inline] |
| Privilege escalation due to weak configuration during package extraction process. |
| Improper authorization leads to Remote Code Execution via SocketIO interface. |
| Privilege escalation due to weak configuration while temporary file handling. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Improper Privilege Management vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access. |
