| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: option: fix slab OOB read in interrupt URB callback
The interrupt URB buffer is allocated in setup_port_interrupt_in() based
on the endpoint's wMaxPacketSize:
buffer_size = usb_endpoint_maxp(epd);
port->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
When a USB device declares wMaxPacketSize = 8 on its interrupt IN
endpoint, the buffer is allocated from kmalloc-8 cache (exactly
8 bytes).
If the device sends a short packet (actual_length < wMaxPacketSize),
the URB completes with status == 0 and the callback proceeds to read:
data[sizeof(struct usb_ctrlrequest)]
which evaluates to data[8], accessing 1 byte beyond the allocated 8-byte
buffer. This results in a slab out-of-bounds read.
Fix this by adding the missing bounds check: first verify that the
actual length is large enough to contain the struct usb_ctrlrequest
header before accessing req_pkt->bRequestType and req_pkt->bRequest,
and then verify that there is an additional byte for the modem signal
state before reading data[sizeof(struct usb_ctrlrequest)] inside the
conditional. Use sizeof(*req_pkt) instead of sizeof(struct
usb_ctrlrequest) for consistency.
[ johan: use dev_err(); split signals declaration and initialisation ] |
| In the Linux kernel, the following vulnerability has been resolved:
USB: c67x00: fix use-after-free in c67x00_add_iso_urb()
When TD creation fails for the last packet of an isochronous URB,
c67x00_add_iso_urb() gives the URB back before updating the endpoint
scheduling state.
c67x00_giveback_urb() frees the URB private data, and the completion
callback may release the final URB reference. The following accesses to
urbp->ep_data, urb->interval, and urbp->cnt can therefore use freed
memory.
Update next_frame and cnt before giving back the failed final packet,
making the giveback the last operation that uses the URB and its private
data. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: ensure tx headroom in usb_sdio_tx_prepare_skb
mt7925_usb_sdio_tx_prepare_skb() pushes a TX descriptor and a USB
header onto every skb and assumes the headroom for them is already
there. That holds for locally generated traffic, where mac80211
reserves hw->extra_tx_headroom, but forwarded frames are sent through
ieee80211_8023_xmit(), which does not reserve it. Bridge a wired
interface to an mt7925u AP and the first forwarded frame that arrives
short panics the kernel:
skbuff: skb_under_panic: len:415 put:4 tail:0x19b end:0x640 dev:wlan1
kernel BUG at net/core/skbuff.c:212!
Call trace:
skb_panic+0x58/0x60 (P)
skb_push+0x58/0x60
mt7925_usb_sdio_tx_prepare_skb+0xf8/0x1b8 [mt7925_common]
mt76u_tx_queue_skb+0xa0/0x1f8 [mt76_usb]
__mt76_tx_queue_skb+0x54/0xe8 [mt76]
mt76_txq_schedule.part.0+0x204/0x478 [mt76]
mt76_txq_schedule_all+0x50/0x80 [mt76]
mt792x_tx_worker+0x68/0x100 [mt792x_lib]
__mt76_worker_fn+0x84/0x150 [mt76]
Whether a given setup hits it depends on how much headroom the ingress
netdev leaves in its rx skbs. Reproduced on a Raspberry Pi 5 bridging
onboard ethernet to a Netgear A9000; originally reported on an MT7986
router running OpenWrt. Nick Morrow's testing on a Pi 4 (bcmgenet),
which leaves more headroom, helped narrow the trigger to the ingress
path.
The same bug was fixed on mt7921 by commit 98c4d0abf5c4 ("mt76:
mt7921: don't assume adequate headroom for SDIO headers"), but mt7925
was copied from mt7921 without the fix. Add the same guard here. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usbfs: fix use-after-free of usb_device in usbdev_release()
usbdev_release() drops its reference to the struct usb_device before
draining the list of completed async URBs, but that drain path reads back
through the same object: free_async() calls dec_usb_memory_use_count()
for any URB whose buffer came from the usbfs mmap() region, and its first
statement is bus_to_hcd(ps->dev->bus).
After a disconnect the usbfs reference can be the last one, in which case
usb_put_dev() frees the device and the subsequent loop reads offset 80 of
freed memory and uses the result as a struct usb_hcd *, which
hcd_buffer_free_pages() then dereferences.
This is reachable by an unprivileged process that has read/write access to
a /dev/bus/usb node: mmap() the fd, submit one URB with a buffer inside the
mapping, wait for the device to be unplugged, then munmap() and close().
It reproduces on every attempt rather than being a race, because a live
MAP_SHARED vma holds a reference on the struct file, so usbdev_release()
cannot run until the last vma is gone and the freeing branch of
dec_usb_memory_use_count() is always taken.
BUG: KASAN: slab-use-after-free in dec_usb_memory_use_count+0x3ae/0x410
Read of size 8 at addr ffff8880122ee050 by task poc/769
CPU: 1 UID: 1000 PID: 769 Comm: poc Tainted: G B 6.12.94 #3
Call Trace:
dec_usb_memory_use_count+0x3ae/0x410
free_async+0x2aa/0x4f0
usbdev_release+0x375/0x460
__fput+0x3ea/0xb50
__x64_sys_close+0x86/0x100
Allocated by task 11:
usb_alloc_dev+0x55/0xd90
hub_event+0x2524/0x43d0
Freed by task 769:
kfree+0x121/0x360
device_release+0xd2/0x280
usb_put_dev+0x23/0x30
usbdev_release+0x2d8/0x460
Release the device reference after the drain loop instead. Nothing between
the two points requires it to have been dropped. |
| An arbitrary file upload vulnerability in /cgi-bin/ugwupload.cgi of MBS-Solutions X-Serie Gateway firmware V6_00_05 allows a remote authenticated user with Admin role to upload files with arbitrary content to hardcoded paths. |
| ** UNSUPPORTED WHEN ASSIGNED ** Uncontrolled Recursion vulnerability in Apache Lucy.
This issue affects Apache Lucy: all versions.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users.
NOTE: This vulnerability only affects products that are no longer supported by the ASF. Lucy is now maintained outside of the ASF at https://github.com/lucysearch |
| In the Linux kernel, the following vulnerability has been resolved:
netpoll: fix a use-after-free on shutdown path
There is a use-after-free error on netpoll, which is clearly detected by
KASAN.
BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80
Read of size 1 at addr ... by task kworker/9:1
Workqueue: events queue_process
Call Trace:
skb_dequeue+0x1e/0xb0
queue_process+0x2c/0x600
process_scheduled_works+0x4b6/0x850
worker_thread+0x414/0x5a0
Allocated by task 242:
__netpoll_setup+0x201/0x4a0
netpoll_setup+0x249/0x550
enabled_store+0x32f/0x380
Freed by task 0:
kfree+0x1b7/0x540
rcu_core+0x3f8/0x7a0
The problem happens when there is a pending TX worker running in
parallel with the cleanup path.
This is what happens on netpoll shutdown path:
1) __netpoll_cleanup() is called
2) set dev->npinfo to NULL
3) call_rcu() with rcu_cleanup_netpoll_info()
3.1) rcu_cleanup_netpoll_info() tries to cancel all workers with
cancel_delayed_work(), but doesn't wait for the worker to finish
4) and kfree(npinfo);
Because 3.1) doesn't really cancel the work, as the comment says "we
can't call cancel_delayed_work_sync here, as we are in softirq", the TX
worker can run after 4).
Tl;DR: queue_process() is not an RCU reader, it reaches npinfo through
the work item via container_of().
Use disable_delayed_work_sync() to ensure the worker is completely
stopped and prevent any future re-arming attempts. Once npinfo is set
to NULL, senders will bail out and not queue new work. The disable flag
ensures any in-flight re-arming attempts also fail silently.
In the future, we can do the cleanup inline here without needing the
npinfo->rcu rcu_head, but that is net-next material. |
| goose 1.37.0 executes arbitrary commands from recipe stdio extensions and retry.checks without security inspection. Attackers can distribute malicious recipes that execute shell commands as the user running goose, bypassing the recipe security scan which does not inspect extensions or retry configurations. |
| Blinko 1.8.7 contains a cross-user private note disclosure vulnerability in the noteReferenceList procedure that performs no ownership verification on supplied note identifiers. Authenticated attackers can enumerate sequential note IDs and retrieve complete content of other users' private notes including attachments and tags. |
| excel-mcp-server 0.1.8 fails to enforce path confinement in stdio mode when EXCEL_FILES_PATH is unset, allowing attackers to read and write arbitrary files. Attackers can supply unchecked file paths to read and write tools to access any file accessible to the process. |
| xiaobei through 5.5.2 fails to implement authentication or signature validation on webhook endpoints, allowing unauthenticated attackers to inject arbitrary messages into the agent pipeline. Attackers can publish malicious messages via the /webhook_worktool handler and exploit unvalidated media URL fetching to perform server-side request forgery against internal services. |
| tokenizers (Hugging Face) is affected by an out-of-bounds buffer access in BpeBuilder::build (tokenizers/src/models/bpe/model.rs). When loading a tokenizer.json via Tokenizer::from_file/from_str, the builder sizes a scratch buffer to the longest vocabulary key, then writes each concatenated merge rule into it. A merge whose concatenated token exceeds the longest vocabulary key overruns the buffer, which Rust turns into a panic that aborts the process in Rust and FFI embeddings. This occurs at load time with no encoding required, so an attacker who supplies a crafted tokenizer.json can cause a denial of service. A secondary defect at the same location can cause a usize underflow (panic in debug, potential memory corruption in release) when continuing_subword_prefix is set and a merge token is shorter than the prefix. Observed in version 0.23.1. |
| marker through 2.0.0 contains a path traversal vulnerability in the FastAPI /marker/upload handler that fails to sanitize the file.filename parameter. Unauthenticated attackers can supply filenames containing directory traversal sequences to write arbitrary files to any location or delete existing files on the system. |
| llmware 0.4.6 contains an SQL injection vulnerability in the collection-database layer (llmware/resources.py) where filter and lookup values are directly string-interpolated into SQL WHERE clauses without parameterization or escaping, in both the SQLite and PostgreSQL backends. The filter validator only checks keys against an allow-list and never sanitizes values. Attacker-controlled filter values reaching the public API via Library.block_lookup and Query.text_query_with_custom_filter / text_query_by_author_or_speaker can neutralize the intended filter to disclose rows the caller was scoped out of (cross-document/cross-collection disclosure); on PostgreSQL the flaw permits boolean- and UNION-based SQL injection. |
| MegaParse 0.0.55 contains an unauthenticated server-side request forgery vulnerability in the POST /v1/url endpoint that fetches caller-supplied URLs server-side. Attackers can supply internal service URLs or metadata endpoints without authentication to read their responses directly from the JSON response. |
| A broken access control vulnerability in the ugw-usr-edit method of /cgi-bin/wwwugw.cgi in MBS-Solutions X-Serie Gateway firmware V6_00_05 allows a remote authenticated user with the low-privileged Standard role to change the password of arbitrary accounts. |
| IBM Observability with Instana (Agent) Build 1.0.303 through 1.0.323 IBM Instana Agent Operator could allow an authenticated Kubernetes tenant to hijack or permanently destroy another tenant's cluster-level RBAC permissions, caused by cluster-scoped RBAC objects being keyed solely by the bare CR name with no namespace disambiguation, allowing a same-named `InstanaAgent` CR in an attacker-controlled namespace to silently overwrite the shared `ClusterRoleBinding` or delete it outright and revoke the victim agent's cluster monitoring access. |
| IBM Observability with Instana (Agent) Build 1.0.303 through 1.0.323 IBM Instana Agent Operator could allow an authenticated remote attacker to obtain sensitive information, caused by missing destination namespace validation when copying etcd mTLS client credentials from the openshift-etcd system namespace into an attacker-controlled namespace. |
| Insecure Permission vulnerability in MBS-Solutions X-Serie Gateway firmware V6_00_05 allows the low-privileged service user to execute /usr/bin/tcpdump as root without a password. By leveraging the tcpdump -z option, an authenticated attacker can achieve arbitrary command execution. |
| PowerJob Server version 5.1.2 (and likely earlier) uses a predictable JWT signing key for HS256-based authentication. This allows a remote attacker to execute arbitrary code. |
