| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: hv_netvsc: reject RSS hash key programming without RX indirection table
RSS configuration requires a valid RX indirection table. When the device
reports a single receive queue, rndis_filter_device_add() does not
allocate an indirection table, accepting RSS hash key updates in this
state leads to a hang.
Fix this by gating netvsc_set_rxfh() on ndc->rx_table_sz and return
-EOPNOTSUPP when the table is absent. This aligns set_rxfh with the device
capabilities and prevents incorrect behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: Coalesce only linear skb
vsock/virtio common tries to coalesce buffers in rx queue: if a linear skb
(with a spare tail room) is followed by a small skb (length limited by
GOOD_COPY_LEN = 128), an attempt is made to join them.
Since the introduction of MSG_ZEROCOPY support, assumption that a small skb
will always be linear is incorrect. In the zerocopy case, data is lost and
the linear skb is appended with uninitialized kernel memory.
Of all 3 supported virtio-based transports, only loopback-transport is
affected. G2H virtio-transport rx queue operates on explicitly linear skbs;
see virtio_vsock_alloc_linear_skb() in virtio_vsock_rx_fill(). H2G
vhost-transport may allocate non-linear skbs, but only for sizes that are
not considered for coalescence; see PAGE_ALLOC_COSTLY_ORDER in
virtio_vsock_alloc_skb().
Ensure only linear skbs are coalesced. Note that skb_tailroom(last_skb) > 0
guarantees last_skb is linear. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Sanitize payload size to prevent member overflow
In qla27xx_copy_fpin_pkt() and qla27xx_copy_multiple_pkt(), the frame_size
reported by firmware is used to calculate the copy length into
item->iocb. However, the iocb member is defined as a fixed-size 64-byte
array within struct purex_item.
If the reported frame_size exceeds 64 bytes, subsequent memcpy calls will
overflow the iocb member boundary. While extra memory might be allocated,
this cross-member write is unsafe and triggers warnings under
CONFIG_FORTIFY_SOURCE.
Fix this by capping total_bytes to the size of the iocb member (64 bytes)
before allocation and copying. This ensures all copies remain within the
bounds of the destination structure member. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: scarlett2: Fix buffer overflow in config retrieval
The scarlett2_usb_get_config() function has a logic error in the
endianness conversion code that can cause buffer overflows when
count > 1.
The code checks `if (size == 2)` where `size` is the total buffer size in
bytes, then loops `count` times treating each element as u16 (2 bytes).
This causes the loop to access `count * 2` bytes when the buffer only
has `size` bytes allocated.
Fix by checking the element size (config_item->size) instead of the
total buffer size. This ensures the endianness conversion matches the
actual element type. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source
When simple_write_to_buffer() succeeds, it returns the number of bytes
actually copied to the buffer. The code incorrectly uses 'count'
as the index for null termination instead of the actual bytes copied.
If count exceeds the buffer size, this leads to out-of-bounds write.
Add a check for the count and use the return value as the index.
The bug was validated using a demo module that mirrors the original
code and was tested under QEMU.
Pattern of the bug:
- A fixed 64-byte stack buffer is filled using count.
- If count > 64, the code still does buf[count] = '\0', causing an
- out-of-bounds write on the stack.
Steps for reproduce:
- Opens the device node.
- Writes 128 bytes of A to it.
- This overflows the 64-byte stack buffer and KASAN reports the OOB.
Found via static analysis. This is similar to the
commit da9374819eb3 ("iio: backend: fix out-of-bound write") |
| A vulnerability in the Certificate Management feature of Cisco Meeting Management could allow an authenticated, remote attacker to upload arbitrary files, execute arbitrary commands, and elevate privileges to root on an affected system.
This vulnerability is due to improper input validation in certain sections of the web-based management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to upload arbitrary files to the affected system. The malicious files could overwrite system files that are processed by the root system account and allow arbitrary command execution with root privileges. To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of video operator. |
| A maliciously crafted project directory, when opening a max file in Autodesk 3ds Max, could lead to execution of arbitrary code in the context of the current process due to an Untrusted Search Path being utilized. |
| apko allows users to build and publish OCI container images built from apk packages. From version 0.14.8 to before 1.1.1, a path traversal vulnerability was discovered in apko's dirFS filesystem abstraction. An attacker who can supply a malicious APK package (e.g., via a compromised or typosquatted repository) could create directories or symlinks outside the intended installation root. The MkdirAll, Mkdir, and Symlink methods in pkg/apk/fs/rwosfs.go use filepath.Join() without validating that the resulting path stays within the base directory. This issue has been patched in version 1.1.1. |
| apko allows users to build and publish OCI container images built from apk packages. From version 0.14.8 to before 1.1.1, an attacker who controls or compromises an APK repository used by apko could cause resource exhaustion on the build host. The ExpandApk function in pkg/apk/expandapk/expandapk.go expands .apk streams without enforcing decompression limits, allowing a malicious repository to serve a small, highly-compressed .apk that inflates into a large tar stream, consuming excessive disk space and CPU time, causing build failures or denial of service. This issue has been patched in version 1.1.1. |
| Apollo Server is an open-source, spec-compliant GraphQL server that's compatible with any GraphQL client, including Apollo Client. In versions from 2.0.0 to 3.13.0, 4.2.0 to before 4.13.0, and 5.0.0 to before 5.4.0, the default configuration of startStandaloneServer from @apollo/server/standalone is vulnerable to denial of service (DoS) attacks through specially crafted request bodies with exotic character set encodings. This issue does not affect users that use @apollo/server as a dependency for integration packages, like @as-integrations/express5 or @as-integrations/next, only direct usage of startStandaloneServer. |
| melange allows users to build apk packages using declarative pipelines. In version 0.11.3 to before 0.40.3, an attacker who can influence the tar stream from a QEMU guest VM could write files outside the intended workspace directory on the host. The retrieveWorkspace function extracts tar entries without validating that paths stay within the workspace, allowing path traversal via ../ sequences. This issue has been patched in version 0.40.3. |
| melange allows users to build apk packages using declarative pipelines. From version 0.3.0 to before 0.40.3, an attacker who can provide build input values, but not modify pipeline definitions, could execute arbitrary shell commands if the pipeline uses ${{vars.*}} or ${{inputs.*}} substitutions in working-directory. The field is embedded into shell scripts without proper quote escaping. This issue has been patched in version 0.40.3. |
| melange allows users to build apk packages using declarative pipelines. From version 0.10.0 to before 0.40.3, an attacker who can influence inputs to the patch pipeline could execute arbitrary shell commands on the build host. The patch pipeline in pkg/build/pipelines/patch.yaml embeds input-derived values (series paths, patch filenames, and numeric parameters) into shell scripts without proper quoting or validation, allowing shell metacharacters to break out of their intended context. The vulnerability affects the built-in patch pipeline which can be invoked through melange build and melange license-check operations. An attacker who can control patch-related inputs (e.g., through pull request-driven CI, build-as-a-service, or by influencing melange configurations) can inject shell metacharacters such as backticks, command substitutions $(…), semicolons, pipes, or redirections to execute arbitrary commands with the privileges of the melange build process. This issue has been patched in version 0.40.3. |
| Alist is a file list program that supports multiple storages, powered by Gin and Solidjs. Prior to version 3.57.0, the application contains path traversal vulnerability in multiple file operation handlers. An authenticated attacker can bypass directory-level authorisation by injecting traversal sequences into filename components, enabling unauthorised file removal, movement and copying across user boundaries within the same storage mount. This issue has been patched in version 3.57.0. |
| FacturaScripts is open-source enterprise resource planning and accounting software. Prior to version 2025.81, FacturaScripts contains a critical SQL injection vulnerability in the autocomplete functionality that allows authenticated attackers to extract sensitive data from the database including user credentials, configuration settings, and all stored business data. The vulnerability exists in the CodeModel::all() method where user-supplied parameters are directly concatenated into SQL queries without sanitization or parameterized binding. This issue has been patched in version 2025.81. |
| FacturaScripts is open-source enterprise resource planning and accounting software. Prior to version 2025.81, FacturaScripts contains a critical SQL injection vulnerability in the REST API that allows authenticated API users to execute arbitrary SQL queries through the sort parameter. The vulnerability exists in the ModelClass::getOrderBy() method where user-supplied sorting parameters are directly concatenated into the SQL ORDER BY clause without validation or sanitization. This affects all API endpoints that support sorting functionality. This issue has been patched in version 2025.81. |
| Terraform / OpenTofu Provider adds support for Proxmox Virtual Environment. Prior to version 0.93.1, in the SSH configuration documentation, the sudoer line suggested is insecure and can result in escaping the folder using ../, allowing any files on the system to be edited. This issue has been patched in version 0.93.1. |
| Group-Office is an enterprise customer relationship management and groupware tool. Prior to versions 6.8.150, 25.0.82, and 26.0.5, there is a remote code execution (RCE) vulnerability in Group-Office. The endpoint email/message/tnefAttachmentFromTempFile directly concatenates the user-controlled parameter tmp_file into an exec() call. By injecting shell metacharacters into tmp_file, an authenticated attacker can execute arbitrary system commands on the server. This issue has been patched in versions 6.8.150, 25.0.82, and 26.0.5. |
| OpenSlides is a free, web based presentation and assembly system for managing and projecting agenda, motions and elections of an assembly. Prior to version 4.2.29, OpenSlides supports local logins with username and password or an optionally configurable single sign on with SAML via an external IDP. For users synced to OpenSlides via an external IDP, there is an incorrect access control regarding the local login of these users. Users can successfully login using the local login form and the OpenSlides username of a SAML user and a trivial password. This password is valid for all SAML users. This issue has been patched in version 4.2.29. |
| Locutus brings stdlibs of other programming languages to JavaScript for educational purposes. In versions from 2.0.12 to before 2.0.39, a prototype pollution vulnerability exists in locutus. Despite a previous fix that attempted to mitigate prototype pollution by checking whether user input contained a forbidden key, it is still possible to pollute Object.prototype via a crafted input using String.prototype. This issue has been patched in version 2.0.39. |
