| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix fcache_disposal UAF by inlining dispose state into nfsd_net
nfsd_file_dispose_list_delayed() defers fput() to nfsd service threads
via a per-net freeme queue, preventing the shrinker and GC worker from
bearing the cost of closing files (see ffb402596147). However, the
queue lives in a separately-allocated struct nfsd_fcache_disposal that
is freed by nfsd_free_fcache_disposal_net() during per-net teardown.
The global shrinker, laundrette, and fsnotify callbacks can still be
inside nfsd_file_dispose_list_delayed() dereferencing that pointer,
causing a use-after-free.
Inline the spinlock and freeme list directly into struct nfsd_net (as
fcache_dispose_lock and fcache_dispose_list), eliminating the separately
allocated struct nfsd_fcache_disposal entirely. These fields now have
the same lifetime as the net namespace itself, so there is no dangling
pointer to chase.
nfsd_file_cache_start_net() now just initializes the inline fields and
cannot fail due to allocation. nfsd_file_cache_shutdown_net() drains
the inline list directly instead of freeing a separate struct. The
alloc/free helpers are removed. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix nfsd_file leak on inter-server COPY setup failure
When nfsd4_setup_inter_ssc() fails, nfsd4_copy() returns
nfserr_offload_denied directly, bypassing the out: label where
release_copy_files() would drop the nf_dst reference taken by
nfs4_preprocess_stateid_op(). Each failed inter-server COPY
leaks one nfsd_file, pinning file/inode/dentry/vfsmount.
Fix by setting status and jumping to out: instead of returning
directly. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix null dereference in nfsd4_setattr for deleg timestamp attrs
When a SETATTR request includes FATTR4_WORD2_TIME_DELEG_ACCESS or
FATTR4_WORD2_TIME_DELEG_MODIFY in the attribute bitmap, nfsd4_setattr()
sets deleg_attrs=true and calls nfs4_preprocess_stateid_op() to validate
the stateid.
If the client supplies the NFSv4 "one stateid" (all-0xFF bytes),
check_special_stateids() returns nfs_ok without populating the output
nfs4_stid pointer, because the special-stateid path in
nfs4_preprocess_stateid_op() jumps to done: with s==NULL, and the
"if (s)" block that would set *cstid is skipped. The local variable `st`
remains NULL.
Back in nfsd4_setattr(), the if (deleg_attrs) block then unconditionally
dereferences st->sc_type (at offset 4 from NULL), causing a kernel oops.
This is remotely triggerable by any NFSv4 client: send COMPOUND [PUTROOTFH,
SETATTR(ONE_STATEID, {bmval2=FATTR4_WORD2_TIME_DELEG_ACCESS, ...})].
No authentication, delegation, or prior state is required.
Fix by adding a NULL check before the dereference. A special stateid is
not a delegation stateid, so the existing nfserr_bad_stateid return value
is already correct; we only need to guard the pointer dereference itself. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix partial-write detection in nfsd_direct_write
nfsd_direct_write() walks a list of write segments and, after each
vfs_iocb_iter_write(), tries to detect a short write so the loop can
stop before placing the next segment at a wrong file offset:
host_err = vfs_iocb_iter_write(file, kiocb, &segments[i].iter);
if (host_err < 0)
return host_err;
*cnt += host_err;
if (host_err < segments[i].iter.count)
break; /* partial write */
vfs_iocb_iter_write() runs the iter through ->write_iter(), which
advances the iter by the number of bytes written. By the time the
check runs, segments[i].iter.count is the residual, not the original
request length:
before write_iter: iter.count == original_len
after write_iter: iter.count == original_len - host_err
The condition then reduces to host_err < original_len - host_err, so
the break fires only when less than half of the segment was written.
Any short write completing between 50% and 99% of the segment slips
through; the loop advances to the next segment with kiocb->ki_pos
only bumped by the short amount, writing the next segment's payload
at the wrong offset and over-reporting *cnt to the NFS client.
Snapshot the segment's byte count before the write and compare
host_err against that snapshot so any short write breaks the loop. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: hold rcu across localio cmpxchg retry
nfsd_file objects are freed via call_rcu (filecache.c:296), and
nfsd_file_slab is created without SLAB_TYPESAFE_BY_RCU
(KMEM_CACHE(nfsd_file, 0) at filecache.c:789), so the slab page
backing a freed nfsd_file becomes freely reclaimable once the RCU
grace period elapses.
The again: retry block in nfsd_open_local_fh() loads a pointer with
cmpxchg and then calls nfsd_file_get(new) (which is
refcount_inc_not_zero) without holding rcu_read_lock. The sole caller
nfs_open_local_fh() drops rcu_read_lock before invoking this helper,
so no outer reader-side critical section covers the load.
CPU 0 (nfsd_open_local_fh) CPU 1 (nfsd_file_put_local)
----- -----
new = cmpxchg(pnf, NULL, ...)
nf = xchg(pnf, NULL)
nfsd_file_put(nf)
last ref -> call_rcu()
/* grace period elapses;
slab page recycled */
nfsd_file_get(new)
refcount_inc_not_zero(&new->nf_ref)
/* operates on recycled memory */
A non-zero word at the nf_ref offset of the recycled object makes the
refcount bump appear to succeed, and the caller then dereferences
new->nf_net and new->nf_file out of freed memory.
Fix by taking rcu_read_lock() immediately before the cmpxchg and
releasing it on all three exits of the if (new) block: the goto-again
retry, the lost-race cleanup path, and the install-succeeded path.
nfsd_file_put() and nfsd_net_put() stay outside the RCU section so
they remain free to block. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: move nfsd_debugfs_init() after nfsd4_init_slabs() in init_nfsd()
nfsd_debugfs_init() runs before nfsd4_init_slabs() in init_nfsd().
If the slab allocation fails, the bare "return retval" bypasses
nfsd_debugfs_exit(), leaving orphan debugfs files with stale fops
pointers into the freed module text.
Move nfsd_debugfs_init() to after the slab init succeeds, so the
early return has no debugfs state to clean up.
Since debugfs is now the more recently initialized of the two, also
update the unwind paths to match reverse-initialization (LIFO) order:
run nfsd_debugfs_exit() before nfsd4_free_slabs() in both the
init_nfsd() error path and exit_nfsd(). The nfsd debugfs files only
reference module-global state and have no dependency on the slab
caches, so that reordering is a cleanup with no functional change. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: close shrinker/GC/fsnotify vs per-net shutdown race in filecache
The shrinker, GC worker, and fsnotify/lease callbacks can unhash an
nfsd_file from the rhashtable and then call
nfsd_file_dispose_list_delayed() to move it to the per-net dispose list.
If nfsd_file_cache_shutdown_net() runs concurrently, its rhashtable walk
misses the already-unhashed file, and its drain of the per-net dispose
list can run before the file has been queued. The file then sits on
the per-net list with no thread to drain it, leaking both the file and
its associated state.
The GC worker and shrinker already hold nfsd_gc_lock while walking the
LRU, but in the original code they release it before calling
nfsd_file_dispose_list_delayed(). The fsnotify/lease path
(nfsd_file_close_inode) has no synchronization at all.
Fix this by:
1. Widening nfsd_gc_lock in both nfsd_file_gc() and nfsd_file_lru_scan()
to cover the nfsd_file_dispose_list_delayed() call.
2. Wrapping nfsd_file_close_inode() in nfsd_gc_lock so that all three
callers of nfsd_file_dispose_list_delayed() hold the lock.
3. Adding a spin_lock/unlock(nfsd_gc_lock) barrier in
nfsd_file_cache_shutdown_net() after the purge, so that any
in-progress disposal has fully completed before the per-net list
is drained.
All operations inside the lock are non-sleeping (rhashtable lookups,
atomic bit/refcount ops, list moves, svc_wake_up), so the spinlock is
appropriate. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: release OPEN-decoded posix ACLs via op_release
nfsd4_decode_createhow4() calls nfsd4_decode_fattr4(), which allocates
refcounted struct posix_acl objects via posix_acl_alloc() and stores
them in open->op_pacl and open->op_dpacl. These pointers must be
released once the OPEN compound finishes.
When nfsd4_decode_open_claim4() returns a non-seqid-mutating error,
the dispatcher short-circuits before op_func runs:
nfsd4_proc_compound()
if (op->status && op->opnum == OP_OPEN)
op->status = nfsd4_open_omfg(...)
if (!seqid_mutating_err(ntohl(op->status)))
return op->status; /* nfsd4_open() never runs */
...
opdesc->op_release(&op->u) /* must still release op_pacl/op_dpacl */
Before this change OP_OPEN had no .op_release in nfsd4_ops[], and the
release pair lived inside nfsd4_open() at its out_err: label. On the
short-circuit path nfsd4_open() is never invoked, so both posix_acl
refs leak on every malformed OPEN compound that carries valid POSIX
ACL createhow4 attributes.
Add nfsd4_open_release() and wire it as .op_release for OP_OPEN.
posix_acl_release() is NULL-safe, so the single release site covers
both the normal path and the nfsd4_open_omfg short-circuit. Remove
the matching posix_acl_release() pair from nfsd4_open()'s out_err:
label to avoid double-releasing.
The compound loop has two encoding branches: nfsd4_encode_operation()
for normal ops, and nfsd4_encode_replay() for v4.0 replayed ops.
op_release was only called from nfsd4_encode_operation(), so resources
attached to op->u leak on the replay path.
Move the op_release() call out of nfsd4_encode_operation() and the
replay branch, placing it after the if-else in nfsd4_proc_compound().
This gives a single call site in a fairly obviously-correct place,
covering both the normal encoding and replay paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: cap delegated inode count in ceph_parse_deleg_inos()
ceph_parse_deleg_inos() decodes interval sets of delegated inode numbers
from an MDS create-with-delegation reply. For each set it reads a 64-bit
start and a 64-bit len with ceph_decode_64_safe(), which only validates
that the eight bytes are present in the message, not the value, and then
loops over len while inserting entries into s_delegated_inos.
len is fully attacker controlled. A malicious or compromised MDS can send
one huge interval, many intervals in one reply, duplicate intervals, or
repeated replies that accumulate delegated inodes on the same session.
The original code bounded none of these and could spin the insert loop or
grow the xarray without limit.
Bound both dimensions with a single enforcement point. Track the number
of delegated inodes held by each MDS session in an atomic counter and
grow it only in ceph_insert_deleg_ino(), which uses atomic_add_unless()
to refuse to push the count past CEPH_MAX_DELEG_INOS. Because that helper
is the only place the counter grows, the per-session population can never
exceed the cap, so no separate per-session pre-check is needed. The
counter is decremented when async create consumes a delegated inode or
when an insert fails, incremented when a delegated inode is restored,
initialized with the session xarray, and reset when reconnect destroys
the xarray.
A per-session cap alone still lets one reply spin the insert loop on
duplicate ranges without growing the counter, so also cap the aggregate
interval length accepted from a single reply. Together these bound both
the loop trip count per reply and the xarray population across replies.
The cap is a fixed, client-chosen constant rather than a value derived
from the MDS. mds_client_prealloc_inos is a userspace MDS configuration
option; it is never sent to the kernel client on the wire, and a
server-supplied bound could not be trusted for a defensive limit in any
case. The constant is set well above that option's documented default of
1000 (a generous multiple), so legitimate refill behavior is unaffected
while the CPU and xarray memory a malformed delegation stream can consume
stays bounded.
Impact: a malicious or compromised Ceph MDS can no longer make a client
spin through an unbounded delegated-inode interval or grow one session's
delegated-inode xarray without limit. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: do not repeat ceph_trim_dentries() if no progress possible
ceph_cap_reclaim_work() re-queues itself for as long as
ceph_trim_dentries() returns -EAGAIN, which happens whenever a lease
walk exhausts its `nr_to_scan` budget. This creates a busy loop that
consumes CPU without making any progress when there is nothing to
reclaim: with no cap pressure (`count==0`) and every scanned lease
still valid, each pass runs the full scan budget down to zero and
returns `-EAGAIN`, only to be queued again immediately.
The dir-lease walk made this worse. When `expire_dir_lease` is
`false` (i.e. we have no intention of reclaiming dir leases),
__dir_lease_check() returned `TOUCH` for every valid lease. `TOUCH`
moves the dentry to the tail of the list and resets `di->time` via
__dentry_dir_lease_touch(), so a walk over N valid leases pointlessly
rewrote the list, refreshed the timestamps (preventing them from ever
aging out) and always drained `nr_to_scan`, guaranteeing the `-EAGAIN`
requeue.
Fix this in three steps:
- Return `KEEP` instead of `TOUCH` when `expire_dir_lease` is
`false`. If we are not going to reclaim the lease, leave it in
place instead of churning the list and resetting its timestamp; the
walk then terminates naturally (or via `STOP` at the first fresh
lease).
- Only return `-EAGAIN` from the first (dentry-lease) walk when something
was actually freed. A full batch that frees nothing means retrying
the same list immediately is futile; fall through to the dir-lease
walk instead.
- After both walks, bail out with success (0) when nothing was freed
and there is no cap pressure (`count==0`). There is no reason to
keep retrying when we are not over the cap limit and made no
progress.
Under real cap pressure (`count>0`) the reclaim path is unchanged and
still retries via `-EAGAIN`.
Without this patch, I saw 500 ceph_trim_dentries() calls per second on
our web servers. This is very visible in `/proc/lock_stat` (5 minute
capture):
class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
&mdsc->dentry_list_lock: 126180 128218 0.04 8063.44 15986965.20 124.69 1573354 5296812 0.04 8291.28 74164526.48 14.00
-----------------------
&mdsc->dentry_list_lock 111736 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 2631 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8
&mdsc->dentry_list_lock 3878 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8
&mdsc->dentry_list_lock 9973 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0
-----------------------
&mdsc->dentry_list_lock 123621 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8
&mdsc->dentry_list_lock 1822 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 2720 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0
&mdsc->dentry_list_lock 55 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8
With this patch:
class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
&mdsc->dentry_list_lock: 1203 1215 0.16 408.88 33082.88 27.23 4320501 7357389 0.04 500.64 1961578.00 0.27
-----------------------
&mdsc->dentry_list_lock 1029 [<000000003c9aea8a>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 1
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix leaked inode reference on writeback abort at umount
ceph_dirty_folio() takes a wrbuffer claim on each newly dirtied folio: it
bumps i_wrbuffer_ref (taking an ihold() on the 0->1 transition) and
attaches the snap_context to folio->private. That claim is released only
by ceph_put_wrbuffer_cap_refs(), which for a submitted write runs from
writepages_finish().
In ceph_submit_write(), if ceph_inc_osd_stopping_blocker() fails -- which
happens during umount -- the request is aborted before submission: the
already-collected folios are only redirtied and unlocked, so
writepages_finish() never runs and the claim is leaked.
redirty_page_for_writepage() -> folio_redirty_for_writepage() ->
filemap_dirty_folio() sets PG_dirty directly and does not go through
->dirty_folio, so ceph_dirty_folio() is not re-entered to rebalance it.
Because every subsequent writeback also fails the osd_stopping_blocker,
i_wrbuffer_ref never returns to 0, the ihold() is never dropped, and the
inode cannot be evicted:
VFS: Busy inodes after unmount of ceph
kernel BUG at fs/super.c:650!
Release the orphaned claim in the abort path before redirtying, via
ceph_undo_wrbuffer_claim(): detach the snap_context, drop the wrbuffer
reference (letting i_wrbuffer_ref reach 0 and iput() the inode), and drop
the snap_context reference -- i.e. do what writepages_finish() would have
done for these never-submitted folios.
Only the locked_pages entries are undone; folios still in the fbatch were
never dirty-cleared by this call (folio_clear_dirty_for_io() is the
ownership-transfer point, and a successful move NULLs the fbatch slot), so
they hold no claim this call owns. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: clear tcon after cifsFileInfo_put() in cifs_file_set_size()
When the else branch of cifs_file_set_size() finds a writable file handle
via find_writable_file(), it borrows tcon and server from the handle's
tlink, attempts the handle-based set_file_size() RPC, and then releases
the handle with cifsFileInfo_put().
If set_file_size() fails, execution falls through to the path-based
fallback, which reuses the borrowed tcon and server under the
"if (tcon == NULL)" guard. Since tcon is not NULL at that point, the
guard is skipped. If cifsFileInfo_put() dropped the last reference on a
tlink that was already removed from the tlink tree (TCON_LINK_IN_TREE
cleared, as happens during reconnection or session teardown),
cifs_put_tlink() will have freed tcon; the subsequent set_path_size()
call is then a use-after-free.
Setting tcon = NULL after cifsFileInfo_put() causes the existing guard
to take the cifs_sb_tlink() path, which acquires a fresh reference for
the path-based operation or fails cleanly if the session is gone. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: use cifs_invalidate_cache() in cifs_do_truncate() for O_TRUNC
cifs_do_truncate() is invoked from cifs_open() without i_rwsem, so it
cannot use cifs_resize_file_locked() to perform a proper fscache cookie
resize. Instead, add cifs_invalidate_cache() after cifs_setsize().
cifs_invalidate_cache() calls fscache_invalidate(), which works without
holding i_rwsem: it unconditionally increments inval_counter and sets
FSCACHE_COOKIE_NO_DATA_TO_READ, ensuring that stale cached data is not
served once the cookie is later activated by fscache_use_cookie().
Truncation to zero leaves no valid cached data, making invalidation the
correct semantic here. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: clear setuid/setgid bit on write with cifsacl/modefromsid/posix extensions
When a file has the setuid or setgid bit set and is written to, the VFS
strips those bits and issues a setattr with ATTR_KILL_SUID/ATTR_KILL_SGID
together with an ATTR_MODE carrying the already-cleared mode.
Both cifs_setattr_unix() and cifs_setattr_nounix() unconditionally dropped
ATTR_MODE in that case:
/* skip mode change if it's just for clearing setuid/setgid */
if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID))
attrs->ia_valid &= ~ATTR_MODE;
This is fine for the default mount, where the mode is only emulated via
the DOS read-only attribute and cannot represent the setuid/setgid bits
anyway. However, with the "cifsacl" or "modefromsid" mount options the
mode is stored on the server through an ACL (id_mode_to_cifs_acl()), with
the SMB3.1.1 POSIX extensions the mode is sent to the server directly,
and with the SMB1 Unix extensions (cifs_setattr_unix) the mode is sent
via CIFSSMBUnixSetPathInfo(). In all those cases dropping ATTR_MODE means
the cleared mode is never pushed to the server, so the setuid/setgid bit
survives the write.
This is a security issue: on local filesystems the setuid bit is stripped
when a file is written, but over these cifs.ko mounts the bit persists on
the server, potentially allowing an unexpected privilege escalation on
subsequent execution.
Fix this in two places:
1. cifs_setattr_nounix(): only take the "skip mode change" shortcut
when the mode is emulated via the DOS read-only attribute (i.e.
neither cifsacl/modefromsid nor the SMB3.1.1 POSIX extensions are
in effect), so that the cleared mode is propagated to the server
in the ACL / POSIX cases.
2. cifs_setattr_unix(): this function is only called when Unix
extensions are in effect, so the mode is always stored on the
server. Remove the shortcut entirely so that the cleared mode is
always pushed. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-before-check of ReparseDataLength in reparse_buf_ptr()
reparse_buf_ptr() reads buf->ReparseDataLength before checking that
count covers the full fixed header:
buf = (struct reparse_data_buffer *)((u8 *)io + off);
len = sizeof(*buf); /* 8 bytes */
rdlen = le16_to_cpu(buf->ReparseDataLength); /* offset 4, 2 bytes */
if (count < len || count < rdlen + len) /* check comes after */
struct reparse_data_buffer has ReparseDataLength at offset 4. If a
server returns OutputCount < 6, the read at offset 4-5 reaches past
the end of the received data. The off+count bounds against iov_len
were already validated, but that does not protect against count being
smaller than sizeof(*buf).
Split the check: verify count >= sizeof(*buf) before reading
ReparseDataLength, then verify count covers the data region. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: universal-pidff: stop the device when force-feedback init fails
universal_pidff_probe() starts the device with hid_hw_start() and then, if
force-feedback initialisation fails, returns the error through a label that
only does "return error". The device is left started.
The HID core does not unwind on the driver's behalf. __hid_device_probe()
releases the devres group, closes the report and clears hdev->driver:
if (ret) {
devres_release_group(&hdev->dev, hdev->devres_group_id);
hid_close_report(hdev);
hdev->driver = NULL;
}
The hidraw character device that hid_hw_start() registered through
hid_connect() is allocated with kzalloc() and added with cdev_device_add(),
so it is not devres-managed and survives that. With hdev->driver NULL,
hid_device_remove() skips hid_hw_stop() as well, because it only unwinds
while a driver is still attached. The registration therefore outlives the
device on both paths.
Opening the surviving /dev/hidrawX writes into freed memory. KASAN reports
a use-after-free write from hidraw_open() -> hid_hw_open() -> the
transport's open callback, which takes a spinlock inside the freed object.
A descriptor that carries a PID usage page and no input reports is enough:
hidraw claims the device so hid_hw_start() succeeds, while hid->inputs
stays empty so force-feedback init fails. The other failure returns in
hid_pidff_init_with_quirks() - no output reports, an allocation failure,
pidff_init_fields(), pidff_check_autocenter(), an unusable effect count,
input_ff_create() - all reach the same label.
Stop the device on that path. hid-dr.c and hid-emsff.c, which start the
device with the same HID_CONNECT_DEFAULT & ~HID_CONNECT_FF mask, already do
this. The two earlier gotos must keep returning without hid_hw_stop(),
since neither has a started device, so give the path that fails after the
start its own label.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: clear rxbuf after I2C/SMBus transfer completes
mcp_i2c_smbus_read() stores the caller-supplied buffer pointer in
mcp->rxbuf for the duration of a transfer but never clears it when the
transfer finishes or times out. Once the caller frees or reuses the
buffer, mcp->rxbuf becomes a dangling pointer. A delayed or spurious
MCP2221_I2C_GET_DATA report can then drive mcp2221_raw_event() to
memcpy device data into the freed memory, causing a write
use-after-free.
Route all return paths through a single exit point that clears
mcp->rxbuf and mcp->rxbuf_size, so that the existing !mcp->rxbuf guard
in the raw_event handler can reject any report arriving after the
transfer has ended. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-thc-hid: intel-quickspi: validate report size before copy
write_cmd_to_txdma() builds an output report in qsdev->report_buf, a heap
buffer allocated in quickspi_alloc_report_buf() to the device-descriptor
derived max_report_len (a few hundred bytes for a touch controller). It
copies the caller-supplied report into that buffer:
memcpy(write_buf->content, report_buf, report_buf_len);
The HID core caps a report at HID_MAX_BUFFER_SIZE (16384) by default, and
quickspi_hid_ll_driver does not set max_buffer_size, so the length reaches
the driver unbounded. A hidraw SET_REPORT/SET_FEATURE ioctl carrying a
report larger than max_report_len therefore overflows report_buf with
attacker-controlled length and content.
Record the report_buf allocation size and reject reports that do not fit
before copying, matching the equivalent guard in the intel-quicki2c
sibling (quicki2c_init_write_buf()) and the hid-goodix-spi fix.
write_cmd_to_txdma() writes the output report header ahead of the content
in the same buffer, so size the allocation to cover the header as well.
That keeps the added bound from rejecting a maximum-sized report. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-thc-hid: intel-quickspi: bound GET_REPORT response to the caller buffer
quickspi_hid_raw_request() receives the caller's buffer length in len, but
quickspi_get_report() never sees it and copies the whole device-supplied
response into buf regardless:
memcpy(buf, qsdev->report_buf, qsdev->report_len);
qsdev->report_len comes from the input report the touch controller returns,
while buf is sized to whatever the caller asked hidraw for through
HIDIOCGFEATURE or HIDIOCGINPUT. A response larger than that overflows buf
with device-controlled content.
The intel-quicki2c sibling already passes the caller length down to
quicki2c_get_report() and validates the response against it before the
copy. Do the same here. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: skip sufficiently large global buffers when resizing
z_erofs_gbuf_nrpages is advanced only after every global buffer has been
grown. If a resize fails after some buffers were enlarged, a retry
revisits those enlarged buffers.
Retrying the same size then returns -ENOMEM because alloc_pages_bulk()
has no pages to add and the unchanged return value is treated as a
failure. Retrying an intermediate size allocates a temporary pointer
array smaller than gbuf->nrpages and copies more existing pointers than
the array can hold.
Skip buffers that already satisfy the request. Once all remaining
buffers have caught up, advancing z_erofs_gbuf_nrpages again describes
the guaranteed minimum size across the pool. |
