| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Info-ZIP Zip 3.0, when the -T and -TT command-line options are used, allows attackers to cause a denial of service (invalid free and application crash) or possibly have unspecified other impact because of an off-by-one error. NOTE: it is unclear whether there are realistic scenarios in which an untrusted party controls the -TT value, given that the entire purpose of -TT is execution of arbitrary commands |
| An issue in Sogou Sogou Input Method < 16.3.0.3498 (fixed in 16.3.0.3498) allows a remote attacker to execute arbitrary code via the biz_helper.exe component |
| kkFileView >= 4.2.0 is vulnerable to Server-Side Request Forgery (SSRF). The cross-origin file proxy endpoint /getCorsFile is protected by TrustHostFilter against the trust.host whitelist. However, the URL parameter validated by the filter is not the same parameter the controller actually fetches: the filter validates the first non-empty parameter in a fixed priority order, while the controller only reads and fetches urlPath. By supplying both urlPath=<real target> and url=<whitelisted decoy address> in the same request, the decoy passes validation while the unvalidated real target is fetched server-side — and the response body is echoed back to the attacker. |
| kkFileView 5.0.0 through 5.0.2 allows reflected XSS via the /onlinePreview endpoint. The OnlinePreviewController passes the user-controlled page and kkagent request parameters to FreeMarker templates without sanitization, and the templates insert these values into raw JavaScript contexts. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/dmem: fix mismatched DMA unmap size for large folios
Device-private THP migration maps migration buffers with page_size()
and records that length in dma_info->size. For a compound folio
page_size() is PAGE_SIZE << order, but two teardown sites still pass a
literal PAGE_SIZE to dma_unmap_page():
- nouveau_dmem_migrate_to_ram() on the success path, and
- nouveau_dmem_migrate_copy_one() on the copy-error path.
For an order > 0 folio this unmaps less than was mapped, leaking the
remainder of the IOMMU/IOVA mapping. The other unmap sites, in
nouveau_dmem_migrate_chunk() and nouveau_dmem_evict_chunk(), already
use the saved size; use it here too. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix scope of mqd_mgr dereference in pqm_debugfs_mqds
Reading /sys/kernel/debug/kfd/mqds while a process holds an active KFD
queue triggers a NULL pointer dereference because the for loop that
calls mqd_mgr->debugfs_show_mqd() is incorrectly placed outside the
if (pqn->q) block that initializes mqd_mgr.
The queue list can contain entries where pqn->q is NULL (kernel queues
where only pqn->kq is valid). In the original code:
if (pqn->q) {
...
mqd_mgr = q->device->dqm->mqd_mgrs[mqd_type];
size = mqd_mgr->mqd_stride(...);
}
for (xcc = 0; xcc < num_xccs; xcc++) { // WRONG: outside if block
mqd = q->mqd + size * xcc;
r = mqd_mgr->debugfs_show_mqd(m, mqd);
}
When iterating over a queue node where pqn->q is NULL:
1. The if (pqn->q) block is skipped
2. mqd_mgr remains uninitialized (NULL from declaration)
3. The for loop executes anyway
4. mqd_mgr->debugfs_show_mqd(m, mqd) dereferences NULL
The crash manifests as:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor instruction fetch in kernel mode
RIP: 0010:0x0
Call Trace:
pqm_debugfs_mqds+0x10c/0x1d0 [amdgpu]
kfd_debugfs_mqds_by_process+0x9b/0x110 [amdgpu]
seq_read_iter+0x132/0x4b0
...
Fix by moving the for loop inside the if (pqn->q) block, so mqd_mgr
and related variables are only used when properly initialized.
(cherry picked from commit 8bfe29d5c798940f797aa24135d2734c3ffce9de) |
| The Ni WooCommerce Sales Report WordPress plugin before 4.2.0 does not have any authentication or authorisation checks on one of its report-printing routines, allowing unauthenticated users to retrieve WooCommerce order details and customer contact information, to target an individual order, and to search the store's orders by customer name or email address. |
| The Royal Elementor Addons WordPress plugin before 1.7.1067 does not properly sanitize and escape values submitted through its form widget before including them in the body of administrator notification emails, allowing unauthenticated attackers to inject arbitrary HTML into emails sent to the site administrator on form submission. |
| The Eventin WordPress plugin before 4.1.24 does not verify that a completed payment corresponds to the order it is applied to, confirming only that the payment gateway reports the transaction as successful, not its amount, currency, or which order it belongs to, allowing unauthenticated visitors to mark unpaid orders of any value as paid by replaying the transaction of a single genuine low-value payment. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Handle negative S1 walk levels in VNCR TLB size evaluation
Computing the effects of a TLB invalidation involves looking at
the size of the mapping cached by the TLB. For S1 mappings such as
VNCR, this is deducted from the combination of the base granule size
and the mapping level.
However, this implies that the S1 MMU is *on*. When the MMU is off,
we indicate this with the level being set to a "creative" value of
-127 (S1_MMU_DISABLED).
This ends-up being misinterpreted by pgshift_level_to_ttl() as it
doesn't handle negative levels at all (the level is immediately cast
to a u8 and only the bottom two bits considered), leading to an
invalidation size of 0. Not helpful.
Tidy-up pgshift_level_to_ttl() to handle these negative levels, and
ttl_to_size() to always return SZ_1G when no valid TTL is present.
This allows the removal of open-coded checks for similar situations.
Note that the check for a negative value not explicitely checking for
S1_MMU_DISABLED is deliberate, so that actual negative levels introduced
with LVA2 and D128 can take the same path if we ever support them. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Allow per function PCI slots to fix slot reset on s390
On s390 systems, which use a machine level hypervisor, PCI devices are
always accessed through a form of PCI pass-through which fundamentally
operates on a per PCI function granularity. This is also reflected in the
s390 PCI hotplug driver which creates hotplug slots for individual PCI
functions. Its reset_slot() function, which is a wrapper for
zpci_hot_reset_device(), thus also resets individual functions.
Currently, the pci_create_slot() assigns the same pci_slot object to
multifunction devices. This approach worked fine on s390 systems that only
exposed virtual functions as individual PCI domains to the operating
system. Since commit 44510d6fa0c0 ("s390/pci: Handling multifunctions")
s390 supports exposing the topology of multifunction PCI devices by
grouping them in a shared PCI domain. This creates a problem when resetting
a function through the hotplug driver's slot_reset() interface.
When attempting to reset a function through the hotplug driver, the shared
slot assignment causes the wrong function to be reset instead of the
intended one. It also leaks memory as we do create a pci_slot object for
the function, but don't correctly free it in pci_slot_release().
Add a flag for struct pci_slot to allow per function PCI slots for
functions managed through a hypervisor, which exposes individual PCI
functions while retaining the topology. Since we can use all 8 bits for
slot 'number' (for ARI devices), change slot 'number' u16 to account for
special values PCI_SLOT_PLACEHOLDER and PCI_SLOT_ALL_DEVICES. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sysfb: ofdrm: Fix integer overflow in fb_size calculation
The framebuffer size calculation `fb_size = linebytes * height` can
overflow when both values are large (e.g., 46341 * 46341 > INT_MAX).
Since linebytes and height are both int types, the multiplication is
performed as int * int, which results in undefined behavior on overflow.
Use check_mul_overflow() to detect and prevent this overflow, consistent
with the approach used in simpledrm.c and corebootdrm.c. |
| The Breeze Cache WordPress plugin before 2.5.15 does not include a set of tracking-related query parameters in its page-cache key while still caching pages requested with them, allowing unauthenticated attackers to have a page rendered under their own request context stored under, and served from, the clean URL's cache entry to every subsequent visitor. |
| The Hide My WP Ghost WordPress plugin before 7.0.11 does not verify that a request is a genuine WooCommerce request before disabling its firewall, threat-detection and login/URL-hiding protections, treating the mere presence of an attacker-suppliable request parameter as sufficient, which allows unauthenticated attackers to disable those protections and re-expose the concealed login and admin URLs on any request. |
| The Hide My WP Ghost WordPress plugin before 7.0.11 does not properly validate a loopback security-check request before disabling its login and URL hiding protection, dropping that protection precisely when the request's verification value is missing or incorrect, which any visitor can arrange, allowing unauthenticated attackers to re-expose the concealed WordPress login page location. |
| The Clean Login WordPress plugin before 1.19 does not check whether user registration is enabled before creating an account in its registration handler, allowing unauthenticated users to create accounts even when the site has registration disabled. |
| The Clean Login WordPress plugin before 1.19 does not verify its registration CAPTCHA when the stored session value is empty, allowing unauthenticated users to bypass the anti-automation control on the registration form and create accounts without solving it. |
| In the Linux kernel, the following vulnerability has been resolved:
gtp: add synchronize_net() in gtp_newlink() error path to prevent use-after-free
gtp_newlink()'s error path frees tid_hash and addr_hash without
waiting for an RCU grace period after clearing sk_user_data. A
concurrent gtp_encap_recv() in softirq may still hold the gtp_dev
pointer obtained via rcu_dereference_sk_user_data() and access the
freed memory.
BUG: KASAN: slab-use-after-free in gtp0_pdp_find+0x1f6/0x200 (gtp.c:152)
Call Trace:
<IRQ>
gtp0_pdp_find+0x1f6/0x200
gtp_encap_recv+0x527/0x24b0
udp_queue_rcv_one_skb+0x75f/0xc10
Add synchronize_net() before the kfree calls in out_hashtable, which
covers all error paths from both gtp_encap_enable() and
gtp_create_sockets(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Drop tt->restore after successful restore
ttm_pool_restore_and_alloc() can successfully complete the restore
process via ttm_pool_restore_commit(), but tt->restore is not dropped
afterward. As a result, subsequent backup/restore flows observe what
appears to be a completed restore, while in reality shmem handles are
still installed in tt->pages, leading to the stack trace below.
Fix this by freeing and dropping tt->restore in
ttm_pool_restore_and_alloc() upon successful completion of the restore.
20545 [ 309.784531] RIP: 0010:sg_alloc_append_table_from_pages+0x38c/0x490
20547 [ 309.809570] RSP: 0018:ffffc9000623b838 EFLAGS: 00010206
20548 [ 309.814827] RAX: 0000000000001000 RBX: ffff88816e42a160 RCX: 0000000000000000
20549 [ 309.821986] RDX: 0000000000002000 RSI: 0000000000000003 RDI: 0000000000001000
20550 [ 309.829147] RBP: ffff88816e42a168 R08: 0000000000000002 R09: 000000007ffff000
20551 [ 309.836310] R10: ffffc9000623b928 R11: 0000000000000000 R12: 000000007ffff000
20552 [ 309.843471] R13: ffff88815ba5a100 R14: 0000000000000000 R15: 0000000000000001
20553 [ 309.850634] FS: 00007f9ff305e700(0000) GS:ffff888276c94000(0000) knlGS:0000000000000000
20554 [ 309.858749] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
20555 [ 309.864519] CR2: 00007f9fca701000 CR3: 00000001565e2005 CR4: 0000000008f70ef0
20556 [ 309.871678] PKRU: 55555558
20557 [ 309.874403] Call Trace:
20558 [ 309.876866] <TASK>
20559 [ 309.878988] sg_alloc_table_from_pages_segment+0x60/0x100
20560 [ 309.884415] ? ttm_resource_manager_usage+0x36/0x60 [ttm]
20561 [ 309.889845] ? xe_tt_map_sg+0x7d/0xd0 [xe]
20562 [ 309.894045] xe_tt_map_sg+0x7d/0xd0 [xe]
20563 [ 309.898037] xe_bo_move+0x927/0xaa0 [xe]
20564 [ 309.902029] ttm_bo_handle_move_mem+0xba/0x170 [ttm]
20565 [ 309.907022] ttm_bo_validate+0xbe/0x190 [ttm]
20566 [ 309.911405] xe_bo_validate+0x9a/0x120 [xe]
20567 [ 309.915663] xe_gpuvm_validate+0xd9/0x140 [xe]
20568 [ 309.920206] drm_gpuvm_validate+0x2f0/0x5b0 [drm_gpuvm]
20569 [ 309.925459] ? drm_exec_lock_obj+0x63/0x210 [drm_exec]
20570 [ 309.930627] xe_vm_validate_rebind+0x46/0xb0 [xe]
20571 [ 309.935428] xe_exec_fn+0x20/0x40 [xe]
20572 [ 309.939249] drm_gpuvm_exec_lock+0x78/0xc0 [drm_gpuvm]
20573 [ 309.944410] xe_validation_exec_lock+0x5a/0xa0 [xe]
20574 [ 309.949385] xe_exec_ioctl+0x806/0xc30 [xe]
20575 [ 309.953639] ? ttwu_queue_wakelist+0xd9/0xf0
20576 [ 309.957935] ? __pfx_xe_exec_fn+0x10/0x10 [xe]
20577 [ 309.962449] ? __wake_up_common+0x73/0xa0
20578 [ 309.966482] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe]
20579 [ 309.971263] drm_ioctl_kernel+0xa3/0x100
20580 [ 309.975209] drm_ioctl+0x213/0x440
20581 [ 309.978637] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe]
20582 [ 309.983415] xe_drm_ioctl+0x67/0xd0 [xe]
20583 [ 309.987408] __x64_sys_ioctl+0x7f/0xd0 |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix use-after-free when perf mmap() revival races with the last munmap()
perf_mmap_close() drops rb->mmap_count *without* holding
event->mmap_mutex (the refcount_dec_and_test() right before the
refcount_dec_and_mutex_lock() of event->mmap_count). A concurrent
perf_mmap_rb() can slot its entire "revival" path into that window
(perf_mmap holds event->mmap_mutex for its whole duration, including
rb_alloc):
munmap side (perf_mmap_close) mmap side (perf_mmap_rb)
----------------------------------- --------------------------------
rb->mmap_count 1 -> 0 (no lock) (holds event->mmap_mutex)
inc_not_zero(rb->mmap_count) fails
ring_buffer_attach(event, NULL)
rb_alloc() + attach new rb
refcount_set(&event->mmap_count, 1)
lock; event->mmap_count 1 -> 0
ring_buffer_attach(event, NULL)
ring_buffer_put() -> frees the *new* rb
The revival's refcount_set(&event->mmap_count, 1) is an invisible
1 -> 1 write: the close frees the just-revived buffer although the
other process still has it mapped -- a page-level use-after-free
allowing local privilege escalation to root by any unprivileged user
(default kernel.perf_event_paranoid=2).
Swap the order of the two counter updates: event->mmap_count is
dropped first via refcount_dec_and_mutex_lock(), so its 1 -> 0
transition and the ring_buffer_attach() stay serialized with
perf_mmap(). rb->mmap_count == 0 then implies every event using the
buffer is detached already, so the result of the rb->mmap_count drop
can gate the remaining teardown directly and detach_rest is no longer
needed.
An earlier fix for this race from Kyle Zeng and David Lee takes
event->mmap_mutex around both counter updates [0]; here the not-last
close stays lockless. |
