Export limit exceeded: 395705 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (6066 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49539 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rtw89: ser: fix CAM leaks occurring in L2 reset The CAM, meaning address CAM and bssid CAM here, will get leaks during SER (system error recover) L2 reset process and ieee80211_restart_hw() which is called by L2 reset process eventually. The normal flow would be like -> add interface (acquire 1) -> enter ips (release 1) -> leave ips (acquire 1) -> connection (occupy 1) <(A) 1 leak after L2 reset if non-sec connection> The ieee80211_restart_hw() flow (under connection) -> ieee80211 reconfig -> add interface (acquire 1) -> leave ips (acquire 1) -> connection (occupy (A) + 2) <(B) 1 more leak> Originally, CAM is released before HW restart only if connection is under security. Now, release CAM whatever connection it is to fix leak in (A). OTOH, check if CAM is already valid to avoid acquiring multiple times to fix (B). Besides, if AP mode, release address CAM of all stations before HW restart. | ||||
| CVE-2022-49199 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: Prevent underflow in nldev_stat_set_counter_dynamic_doit() This code checks "index" for an upper bound but it does not check for negatives. Change the type to unsigned to prevent underflows. | ||||
| CVE-2022-49227 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: igc: avoid kernel warning when changing RX ring parameters Calling ethtool changing the RX ring parameters like this: $ ethtool -G eth0 rx 1024 on igc triggers kernel warnings like this: [ 225.198467] ------------[ cut here ]------------ [ 225.198473] Missing unregister, handled but fix driver [ 225.198485] WARNING: CPU: 7 PID: 959 at net/core/xdp.c:168 xdp_rxq_info_reg+0x79/0xd0 [...] [ 225.198601] Call Trace: [ 225.198604] <TASK> [ 225.198609] igc_setup_rx_resources+0x3f/0xe0 [igc] [ 225.198617] igc_ethtool_set_ringparam+0x30e/0x450 [igc] [ 225.198626] ethnl_set_rings+0x18a/0x250 [ 225.198631] genl_family_rcv_msg_doit+0xca/0x110 [ 225.198637] genl_rcv_msg+0xce/0x1c0 [ 225.198640] ? rings_prepare_data+0x60/0x60 [ 225.198644] ? genl_get_cmd+0xd0/0xd0 [ 225.198647] netlink_rcv_skb+0x4e/0xf0 [ 225.198652] genl_rcv+0x24/0x40 [ 225.198655] netlink_unicast+0x20e/0x330 [ 225.198659] netlink_sendmsg+0x23f/0x480 [ 225.198663] sock_sendmsg+0x5b/0x60 [ 225.198667] __sys_sendto+0xf0/0x160 [ 225.198671] ? handle_mm_fault+0xb2/0x280 [ 225.198676] ? do_user_addr_fault+0x1eb/0x690 [ 225.198680] __x64_sys_sendto+0x20/0x30 [ 225.198683] do_syscall_64+0x38/0x90 [ 225.198687] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 225.198693] RIP: 0033:0x7f7ae38ac3aa igc_ethtool_set_ringparam() copies the igc_ring structure but neglects to reset the xdp_rxq_info member before calling igc_setup_rx_resources(). This in turn calls xdp_rxq_info_reg() with an already registered xdp_rxq_info. Make sure to unregister the xdp_rxq_info structure first in igc_setup_rx_resources. | ||||
| CVE-2022-49226 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: asix: add proper error handling of usb read errors Syzbot once again hit uninit value in asix driver. The problem still the same -- asix_read_cmd() reads less bytes, than was requested by caller. Since all read requests are performed via asix_read_cmd() let's catch usb related error there and add __must_check notation to be sure all callers actually check return value. So, this patch adds sanity check inside asix_read_cmd(), that simply checks if bytes read are not less, than was requested and adds missing error handling of asix_read_cmd() all across the driver code. | ||||
| CVE-2022-49220 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dax: make sure inodes are flushed before destroy cache A bug can be triggered by following command $ modprobe nd_pmem && modprobe -r nd_pmem [ 10.060014] BUG dax_cache (Not tainted): Objects remaining in dax_cache on __kmem_cache_shutdown() [ 10.060938] Slab 0x0000000085b729ac objects=9 used=1 fp=0x000000004f5ae469 flags=0x200000000010200(slab|head|node) [ 10.062433] Call Trace: [ 10.062673] dump_stack_lvl+0x34/0x44 [ 10.062865] slab_err+0x90/0xd0 [ 10.063619] __kmem_cache_shutdown+0x13b/0x2f0 [ 10.063848] kmem_cache_destroy+0x4a/0x110 [ 10.064058] __x64_sys_delete_module+0x265/0x300 This is caused by dax_fs_exit() not flushing inodes before destroy cache. To fix this issue, call rcu_barrier() before destroy cache. | ||||
| CVE-2022-49229 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ptp: unregister virtual clocks when unregistering physical clock. When unregistering a physical clock which has some virtual clocks, unregister the virtual clocks with it. This fixes the following oops, which can be triggered by unloading a driver providing a PTP clock when it has enabled virtual clocks: BUG: unable to handle page fault for address: ffffffffc04fc4d8 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:ptp_vclock_read+0x31/0xb0 Call Trace: timecounter_read+0xf/0x50 ptp_vclock_refresh+0x2c/0x50 ? ptp_clock_release+0x40/0x40 ptp_aux_kworker+0x17/0x30 kthread_worker_fn+0x9b/0x240 ? kthread_should_park+0x30/0x30 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 | ||||
| CVE-2022-49306 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: host: Stop setting the ACPI companion It is no longer needed. The sysdev pointer is now used when assigning the ACPI companions to the xHCI ports and USB devices. Assigning the ACPI companion here resulted in the fwnode->secondary pointer to be replaced also for the parent dwc3 device since the primary fwnode (the ACPI companion) was shared. That was unintentional and it created potential side effects like resource leaks. | ||||
| CVE-2024-57888 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: workqueue: Do not warn when cancelling WQ_MEM_RECLAIM work from !WQ_MEM_RECLAIM worker After commit 746ae46c1113 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM") amdgpu started seeing the following warning: [ ] workqueue: WQ_MEM_RECLAIM sdma0:drm_sched_run_job_work [gpu_sched] is flushing !WQ_MEM_RECLAIM events:amdgpu_device_delay_enable_gfx_off [amdgpu] ... [ ] Workqueue: sdma0 drm_sched_run_job_work [gpu_sched] ... [ ] Call Trace: [ ] <TASK> ... [ ] ? check_flush_dependency+0xf5/0x110 ... [ ] cancel_delayed_work_sync+0x6e/0x80 [ ] amdgpu_gfx_off_ctrl+0xab/0x140 [amdgpu] [ ] amdgpu_ring_alloc+0x40/0x50 [amdgpu] [ ] amdgpu_ib_schedule+0xf4/0x810 [amdgpu] [ ] ? drm_sched_run_job_work+0x22c/0x430 [gpu_sched] [ ] amdgpu_job_run+0xaa/0x1f0 [amdgpu] [ ] drm_sched_run_job_work+0x257/0x430 [gpu_sched] [ ] process_one_work+0x217/0x720 ... [ ] </TASK> The intent of the verifcation done in check_flush_depedency is to ensure forward progress during memory reclaim, by flagging cases when either a memory reclaim process, or a memory reclaim work item is flushed from a context not marked as memory reclaim safe. This is correct when flushing, but when called from the cancel(_delayed)_work_sync() paths it is a false positive because work is either already running, or will not be running at all. Therefore cancelling it is safe and we can relax the warning criteria by letting the helper know of the calling context. References: 746ae46c1113 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM") | ||||
| CVE-2024-38593 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: micrel: Fix receiving the timestamp in the frame for lan8841 The blamed commit started to use the ptp workqueue to get the second part of the timestamp. And when the port was set down, then this workqueue is stopped. But if the config option NETWORK_PHY_TIMESTAMPING is not enabled, then the ptp_clock is not initialized so then it would crash when it would try to access the delayed work. So then basically by setting up and then down the port, it would crash. The fix consists in checking if the ptp_clock is initialized and only then cancel the delayed work. | ||||
| CVE-2024-57879 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: iso: Always release hdev at the end of iso_listen_bis Since hci_get_route holds the device before returning, the hdev should be released with hci_dev_put at the end of iso_listen_bis even if the function returns with an error. | ||||
| CVE-2024-53681 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: Don't overflow subsysnqn nvmet_root_discovery_nqn_store treats the subsysnqn string like a fixed size buffer, even though it is dynamically allocated to the size of the string. Create a new string with kstrndup instead of using the old buffer. | ||||
| CVE-2022-49147 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: Fix the maximum minor value is blk_alloc_ext_minor() ida_alloc_range(..., min, max, ...) returns values from min to max, inclusive. So, NR_EXT_DEVT is a valid idx returned by blk_alloc_ext_minor(). This is an issue because in device_add_disk(), this value is used in: ddev->devt = MKDEV(disk->major, disk->first_minor); and NR_EXT_DEVT is '(1 << MINORBITS)'. So, should 'disk->first_minor' be NR_EXT_DEVT, it would overflow. | ||||
| CVE-2022-49081 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: highmem: fix checks in __kmap_local_sched_{in,out} When CONFIG_DEBUG_KMAP_LOCAL is enabled __kmap_local_sched_{in,out} check that even slots in the tsk->kmap_ctrl.pteval are unmapped. The slots are initialized with 0 value, but the check is done with pte_none. 0 pte however does not necessarily mean that pte_none will return true. e.g. on xtensa it returns false, resulting in the following runtime warnings: WARNING: CPU: 0 PID: 101 at mm/highmem.c:627 __kmap_local_sched_out+0x51/0x108 CPU: 0 PID: 101 Comm: touch Not tainted 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13 Call Trace: dump_stack+0xc/0x40 __warn+0x8f/0x174 warn_slowpath_fmt+0x48/0xac __kmap_local_sched_out+0x51/0x108 __schedule+0x71a/0x9c4 preempt_schedule_irq+0xa0/0xe0 common_exception_return+0x5c/0x93 do_wp_page+0x30e/0x330 handle_mm_fault+0xa70/0xc3c do_page_fault+0x1d8/0x3c4 common_exception+0x7f/0x7f WARNING: CPU: 0 PID: 101 at mm/highmem.c:664 __kmap_local_sched_in+0x50/0xe0 CPU: 0 PID: 101 Comm: touch Tainted: G W 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13 Call Trace: dump_stack+0xc/0x40 __warn+0x8f/0x174 warn_slowpath_fmt+0x48/0xac __kmap_local_sched_in+0x50/0xe0 finish_task_switch$isra$0+0x1ce/0x2f8 __schedule+0x86e/0x9c4 preempt_schedule_irq+0xa0/0xe0 common_exception_return+0x5c/0x93 do_wp_page+0x30e/0x330 handle_mm_fault+0xa70/0xc3c do_page_fault+0x1d8/0x3c4 common_exception+0x7f/0x7f Fix it by replacing !pte_none(pteval) with pte_val(pteval) != 0. | ||||
| CVE-2021-47649 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: udmabuf: validate ubuf->pagecount Syzbot has reported GPF in sg_alloc_append_table_from_pages(). The problem was in ubuf->pages == ZERO_PTR. ubuf->pagecount is calculated from arguments passed from user-space. If user creates udmabuf with list.size == 0 then ubuf->pagecount will be also equal to zero; it causes kmalloc_array() to return ZERO_PTR. Fix it by validating ubuf->pagecount before passing it to kmalloc_array(). | ||||
| CVE-2022-49049 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/secretmem: fix panic when growing a memfd_secret When one tries to grow an existing memfd_secret with ftruncate, one gets a panic [1]. For example, doing the following reliably induces the panic: fd = memfd_secret(); ftruncate(fd, 10); ptr = mmap(NULL, 10, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); strcpy(ptr, "123456789"); munmap(ptr, 10); ftruncate(fd, 20); The basic reason for this is, when we grow with ftruncate, we call down into simple_setattr, and then truncate_inode_pages_range, and eventually we try to zero part of the memory. The normal truncation code does this via the direct map (i.e., it calls page_address() and hands that to memset()). For memfd_secret though, we specifically don't map our pages via the direct map (i.e. we call set_direct_map_invalid_noflush() on every fault). So the address returned by page_address() isn't useful, and when we try to memset() with it we panic. This patch avoids the panic by implementing a custom setattr for memfd_secret, which detects resizes specifically (setting the size for the first time works just fine, since there are no existing pages to try to zero), and rejects them with EINVAL. One could argue growing should be supported, but I think that will require a significantly more lengthy change. So, I propose a minimal fix for the benefit of stable kernels, and then perhaps to extend memfd_secret to support growing in a separate patch. [1]: BUG: unable to handle page fault for address: ffffa0a889277028 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD afa01067 P4D afa01067 PUD 83f909067 PMD 83f8bf067 PTE 800ffffef6d88060 Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 0 PID: 281 Comm: repro Not tainted 5.17.0-dbg-DEV #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:memset_erms+0x9/0x10 Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01 RSP: 0018:ffffb932c09afbf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffda63c4249dc0 RCX: 0000000000000fd8 RDX: 0000000000000fd8 RSI: 0000000000000000 RDI: ffffa0a889277028 RBP: ffffb932c09afc00 R08: 0000000000001000 R09: ffffa0a889277028 R10: 0000000000020023 R11: 0000000000000000 R12: ffffda63c4249dc0 R13: ffffa0a890d70d98 R14: 0000000000000028 R15: 0000000000000fd8 FS: 00007f7294899580(0000) GS:ffffa0af9bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa0a889277028 CR3: 0000000107ef6006 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? zero_user_segments+0x82/0x190 truncate_inode_partial_folio+0xd4/0x2a0 truncate_inode_pages_range+0x380/0x830 truncate_setsize+0x63/0x80 simple_setattr+0x37/0x60 notify_change+0x3d8/0x4d0 do_sys_ftruncate+0x162/0x1d0 __x64_sys_ftruncate+0x1c/0x20 do_syscall_64+0x44/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: xhci_pci xhci_hcd virtio_net net_failover failover virtio_blk virtio_balloon uhci_hcd ohci_pci ohci_hcd evdev ehci_pci ehci_hcd 9pnet_virtio 9p netfs 9pnet CR2: ffffa0a889277028 [lkp@intel.com: secretmem_iops can be static] [axelrasmussen@google.com: return EINVAL] | ||||
| CVE-2022-49066 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: veth: Ensure eth header is in skb's linear part After feeding a decapsulated packet to a veth device with act_mirred, skb_headlen() may be 0. But veth_xmit() calls __dev_forward_skb(), which expects at least ETH_HLEN byte of linear data (as __dev_forward_skb2() calls eth_type_trans(), which pulls ETH_HLEN bytes unconditionally). Use pskb_may_pull() to ensure veth_xmit() respects this constraint. kernel BUG at include/linux/skbuff.h:2328! RIP: 0010:eth_type_trans+0xcf/0x140 Call Trace: <IRQ> __dev_forward_skb2+0xe3/0x160 veth_xmit+0x6e/0x250 [veth] dev_hard_start_xmit+0xc7/0x200 __dev_queue_xmit+0x47f/0x520 ? skb_ensure_writable+0x85/0xa0 ? skb_mpls_pop+0x98/0x1c0 tcf_mirred_act+0x442/0x47e [act_mirred] tcf_action_exec+0x86/0x140 fl_classify+0x1d8/0x1e0 [cls_flower] ? dma_pte_clear_level+0x129/0x1a0 ? dma_pte_clear_level+0x129/0x1a0 ? prb_fill_curr_block+0x2f/0xc0 ? skb_copy_bits+0x11a/0x220 __tcf_classify+0x58/0x110 tcf_classify_ingress+0x6b/0x140 __netif_receive_skb_core.constprop.0+0x47d/0xfd0 ? __iommu_dma_unmap_swiotlb+0x44/0x90 __netif_receive_skb_one_core+0x3d/0xa0 netif_receive_skb+0x116/0x170 be_process_rx+0x22f/0x330 [be2net] be_poll+0x13c/0x370 [be2net] __napi_poll+0x2a/0x170 net_rx_action+0x22f/0x2f0 __do_softirq+0xca/0x2a8 __irq_exit_rcu+0xc1/0xe0 common_interrupt+0x83/0xa0 | ||||
| CVE-2024-43865 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/fpu: Re-add exception handling in load_fpu_state() With the recent rewrite of the fpu code exception handling for the lfpc instruction within load_fpu_state() was erroneously removed. Add it again to prevent that loading invalid floating point register values cause an unhandled specification exception. | ||||
| CVE-2024-50216 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix finding a last resort AG in xfs_filestream_pick_ag When the main loop in xfs_filestream_pick_ag fails to find a suitable AG it tries to just pick the online AG. But the loop for that uses args->pag as loop iterator while the later code expects pag to be set. Fix this by reusing the max_pag case for this last resort, and also add a check for impossible case of no AG just to make sure that the uninitialized pag doesn't even escape in theory. | ||||
| CVE-2024-53152 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: tegra194: Move controller cleanups to pex_ep_event_pex_rst_deassert() Currently, the endpoint cleanup function dw_pcie_ep_cleanup() and EPF deinit notify function pci_epc_deinit_notify() are called during the execution of pex_ep_event_pex_rst_assert() i.e., when the host has asserted PERST#. But quickly after this step, refclk will also be disabled by the host. All of the tegra194 endpoint SoCs supported as of now depend on the refclk from the host for keeping the controller operational. Due to this limitation, any access to the hardware registers in the absence of refclk will result in a whole endpoint crash. Unfortunately, most of the controller cleanups require accessing the hardware registers (like eDMA cleanup performed in dw_pcie_ep_cleanup(), etc...). So these cleanup functions can cause the crash in the endpoint SoC once host asserts PERST#. One way to address this issue is by generating the refclk in the endpoint itself and not depending on the host. But that is not always possible as some of the endpoint designs do require the endpoint to consume refclk from the host. Thus, fix this crash by moving the controller cleanups to the start of the pex_ep_event_pex_rst_deassert() function. This function is called whenever the host has deasserted PERST# and it is guaranteed that the refclk would be active at this point. So at the start of this function (after enabling resources) the controller cleanup can be performed. Once finished, rest of the code execution for PERST# deassert can continue as usual. | ||||
| CVE-2024-41031 | 2 Linux, Redhat | 2 Linux Kernel, Rhel Eus | 2025-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/filemap: skip to create PMD-sized page cache if needed On ARM64, HPAGE_PMD_ORDER is 13 when the base page size is 64KB. The PMD-sized page cache can't be supported by xarray as the following error messages indicate. ------------[ cut here ]------------ WARNING: CPU: 35 PID: 7484 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm \ fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \ sha1_ce virtio_net net_failover virtio_console virtio_blk failover \ dimlib virtio_mmio CPU: 35 PID: 7484 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #9 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x720 sp : ffff800087a4f6c0 x29: ffff800087a4f6c0 x28: ffff800087a4f720 x27: 000000001fffffff x26: 0000000000000c40 x25: 000000000000000d x24: ffff00010625b858 x23: ffff800087a4f720 x22: ffffffdfc0780000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0780000 x18: 000000001ff40000 x17: 00000000ffffffff x16: 0000018000000000 x15: 51ec004000000000 x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020 x11: 51ec000000000000 x10: 51ece1c0ffff8000 x9 : ffffbeb961a44d28 x8 : 0000000000000003 x7 : ffffffdfc0456420 x6 : ffff0000e1aa6eb8 x5 : 20bf08b4fe778fca x4 : ffffffdfc0456420 x3 : 0000000000000c40 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x720 truncate_inode_partial_folio+0xdc/0x160 truncate_inode_pages_range+0x1b4/0x4a8 truncate_pagecache_range+0x84/0xa0 xfs_flush_unmap_range+0x70/0x90 [xfs] xfs_file_fallocate+0xfc/0x4d8 [xfs] vfs_fallocate+0x124/0x2e8 ksys_fallocate+0x4c/0xa0 __arm64_sys_fallocate+0x24/0x38 invoke_syscall.constprop.0+0x7c/0xd8 do_el0_svc+0xb4/0xd0 el0_svc+0x44/0x1d8 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x17c/0x180 Fix it by skipping to allocate PMD-sized page cache when its size is larger than MAX_PAGECACHE_ORDER. For this specific case, we will fall to regular path where the readahead window is determined by BDI's sysfs file (read_ahead_kb). | ||||