| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
udp: Fix wildcard bind conflict check when using hash2
When binding a udp_sock to a local address and port, UDP uses
two hashes (udptable->hash and udptable->hash2) for collision
detection. The current code switches to "hash2" when
hslot->count > 10.
"hash2" is keyed by local address and local port.
"hash" is keyed by local port only.
The issue can be shown in the following bind sequence (pseudo code):
bind(fd1, "[fd00::1]:8888")
bind(fd2, "[fd00::2]:8888")
bind(fd3, "[fd00::3]:8888")
bind(fd4, "[fd00::4]:8888")
bind(fd5, "[fd00::5]:8888")
bind(fd6, "[fd00::6]:8888")
bind(fd7, "[fd00::7]:8888")
bind(fd8, "[fd00::8]:8888")
bind(fd9, "[fd00::9]:8888")
bind(fd10, "[fd00::10]:8888")
/* Correctly return -EADDRINUSE because "hash" is used
* instead of "hash2". udp_lib_lport_inuse() detects the
* conflict.
*/
bind(fail_fd, "[::]:8888")
/* After one more socket is bound to "[fd00::11]:8888",
* hslot->count exceeds 10 and "hash2" is used instead.
*/
bind(fd11, "[fd00::11]:8888")
bind(fail_fd, "[::]:8888") /* succeeds unexpectedly */
The same issue applies to the IPv4 wildcard address "0.0.0.0"
and the IPv4-mapped wildcard address "::ffff:0.0.0.0". For
example, if there are existing sockets bound to
"192.168.1.[1-11]:8888", then binding "0.0.0.0:8888" or
"[::ffff:0.0.0.0]:8888" can also miss the conflict when
hslot->count > 10.
TCP inet_csk_get_port() already has the correct check in
inet_use_bhash2_on_bind(). Rename it to
inet_use_hash2_on_bind() and move it to inet_hashtables.h
so udp.c can reuse it in this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: check error for register_netdev() on init
Current init logic ignores the error code from register_netdev(),
which will cause WARN_ON() on attempt to unregister it, if there was one,
and there is no info for the user that the creation of the netdev failed.
WARNING: CPU: 89 PID: 6902 at net/core/dev.c:11512 unregister_netdevice_many_notify+0x211/0x1a10
...
[ 3707.563641] unregister_netdev+0x1c/0x30
[ 3707.563656] idpf_vport_dealloc+0x5cf/0xce0 [idpf]
[ 3707.563684] idpf_deinit_task+0xef/0x160 [idpf]
[ 3707.563712] idpf_vc_core_deinit+0x84/0x320 [idpf]
[ 3707.563739] idpf_remove+0xbf/0x780 [idpf]
[ 3707.563769] pci_device_remove+0xab/0x1e0
[ 3707.563786] device_release_driver_internal+0x371/0x530
[ 3707.563803] driver_detach+0xbf/0x180
[ 3707.563816] bus_remove_driver+0x11b/0x2a0
[ 3707.563829] pci_unregister_driver+0x2a/0x250
Introduce an error check and log the vport number and error code.
On removal make sure to check VPORT_REG_NETDEV flag prior to calling
unregister and free on the netdev.
Add local variables for idx, vport_config and netdev for readability. |
| The Prime Listing Manager WordPress plugin through 1.1 allows an attacker to gain administrative access without having any kind of account on the targeted site and perform unauthorized actions due to a hardcoded secret. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: fix page_pool error handling in lan966x_fdma_rx_alloc_page_pool()
page_pool_create() can return an ERR_PTR on failure. The return value
is used unconditionally in the loop that follows, passing the error
pointer through xdp_rxq_info_reg_mem_model() into page_pool_use_xdp_mem(),
which dereferences it, causing a kernel oops.
Add an IS_ERR check after page_pool_create() to return early on failure. |
| nimiq-primitives contains primitives (e.g., block, account, transaction) to be used in Nimiq's Rust implementation. Prior to version 1.3.0, an untrusted p2p peer can cause a node to panic by announcing an election macro block whose `validators` set contains an invalid compressed BLS voting key. Hashing an election macro header hashes `validators` and reaches `Validators::voting_keys()`, which calls `validator.voting_key.uncompress().unwrap()` and panics on invalid bytes. The patch for this vulnerability is included as part of v1.3.0. No known workarounds are available. |
| In udev in systemd before 260, local root execution can occur via malicious hardware devices and unsanitized kernel output. |
| Local privilege escalation in Genetec Sipelia Plugin. An authenticated low-privileged Windows user could exploit this vulnerability to gain elevated privileges on the affected system. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data
set_new_password() hex dumps the entire buffer, which contains plaintext
password data, including current and new passwords. Remove the hex dump
to avoid leaking credentials. |
| A vulnerability has been found in wandb OpenUI up to 0.0.0.0/1.0. This impacts an unknown function of the file backend/openui/config.py. The manipulation of the argument LITELLM_MASTER_KEY leads to hard-coded credentials. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw was found in the Submariner project. Due to unnecessary role-based access control permissions, a privileged attacker can run a malicious container on a node that may allow them to steal service account tokens and further compromise other nodes and potentially the entire cluster. |
| Vulnerability in Oracle Java SE (component: Libraries). The supported version that is affected is Oracle Java SE: 25.0.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 3.7 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N). |
| index.php in Flat PHP Board 1.2 and earlier allows remote authenticated users to obtain the password for the current user account by reading the password parameter value in the HTML source for the page generated by a profile action. |
| ZyXEL Prestige routers have a minimum password length for the admin account that is too small, which makes it easier for remote attackers to guess passwords via brute force methods. |
| token.cgi in Bugzilla 3.4rc1 through 3.4.1 places a password in a URL at the beginning of a login session that occurs immediately after a password reset, which allows context-dependent attackers to discover passwords by reading (1) web-server access logs, (2) web-server Referer logs, or (3) the browser history. |
| Nortel MG1000S, Signaling Server, and Call Server on the Communications Server 1000 (CS1K) 4.50.x contain multiple unspecified hard-coded accounts and passwords, which allows remote attackers to gain privileges. |
| Argument injection vulnerability in Dovecot 1.0.x before 1.0.13, and 1.1.x before 1.1.rc3, when using blocking passdbs, allows remote attackers to bypass the password check via a password containing TAB characters, which are treated as argument delimiters that enable the skip_password_check field to be specified. |
| Red Hat Certificate System 7.2 stores passwords in cleartext in the UserDirEnrollment log, the RA wizard installer log, and unspecified other debug log files, and uses weak permissions for these files, which allows local users to discover passwords by reading the files. |
| The Printing component in Apple Mac OS X 10.5.2 might save authentication credentials to disk when starting a job on an authenticated print queue, which might allow local users to obtain the credentials. |
| Aztech ADSL2/2+ 4-port router has a default "isp" account with a default "isp" password, which allows remote attackers to obtain access if this default is not changed. |
| RADIO istek scripti 2.5 stores sensitive information under the web root with insufficient access control, which allows remote attackers to obtain user credentials via a direct request for estafresgaftesantusyan.inc. |
