| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery
In case of a TX error CQE, a recovery flow is triggered,
mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc,
desyncing the DMA FIFO producer and consumer.
After recovery, the producer pushes new DMA entries at the old
dma_fifo_pc, while the consumer reads from position 0.
This causes us to unmap stale DMA addresses from before the recovery.
The DMA FIFO is a purely software construct with no HW counterpart.
At the point of reset, all WQEs have been flushed so dma_fifo_cc is
already equal to dma_fifo_pc. There is no need to reset either counter,
similar to how skb_fifo pc/cc are untouched.
Remove the 'dma_fifo_cc = 0' reset.
This fixes the following WARNING:
WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90
Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables]
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:iommu_dma_unmap_page+0x79/0x90
Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00
Call Trace:
<IRQ>
? __warn+0x7d/0x110
? iommu_dma_unmap_page+0x79/0x90
? report_bug+0x16d/0x180
? handle_bug+0x4f/0x90
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? iommu_dma_unmap_page+0x79/0x90
? iommu_dma_unmap_page+0x2e/0x90
dma_unmap_page_attrs+0x10d/0x1b0
mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core]
mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core]
mlx5e_napi_poll+0x8b/0xac0 [mlx5_core]
__napi_poll+0x24/0x190
net_rx_action+0x32a/0x3b0
? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core]
? notifier_call_chain+0x35/0xa0
handle_softirqs+0xc9/0x270
irq_exit_rcu+0x71/0xd0
common_interrupt+0x7f/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40 |
| In the Linux kernel, the following vulnerability has been resolved:
X.509: Fix out-of-bounds access when parsing extensions
Leo reports an out-of-bounds access when parsing a certificate with
empty Basic Constraints or Key Usage extension because the first byte of
the extension is read before checking its length. Fix it.
The bug can be triggered by an unprivileged user by submitting a
specially crafted certificate to the kernel through the keyrings(7) API.
Leo has demonstrated this with a proof-of-concept program responsibly
disclosed off-list. |
| Zohocorp ManageEngine ADSelfService Plus version before 6525, DataSecurity Plus before 6264 and RecoveryManager Plus before 6313 are vulnerable to Authenticated Remote code execution in the agent machines due to the bug in the 3rd party dependency. |
| A specially crafted domain can be used to cause a memory leak in a BIND resolver simply by querying this domain.
This issue affects BIND 9 versions 9.20.0 through 9.20.20, 9.21.0 through 9.21.19, and 9.20.9-S1 through 9.20.20-S1.
BIND 9 versions 9.18.0 through 9.18.46 and 9.18.11-S1 through 9.18.46-S1 are NOT affected. |
| Undefined behavior may result due to a race condition leading to a use-after-free violation. If BIND receives an incoming DNS message signed with SIG(0), it begins work to validate that signature. If, during that validation, the "recursive-clients" limit is reached (as would occur during a query flood), and that same DNS message is discarded per the limit, there is a brief window of time while the SIG(0) validation may attempt to read the now-discarded DNS message.
This issue affects BIND 9 versions 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, and 9.20.9-S1 through 9.20.22-S1.
BIND 9 versions 9.18.28 through 9.18.49 and 9.18.28-S1 through 9.18.49-S1 are NOT affected. |
| A use-after-free vulnerability exists within the DNS-over-HTTPS implementation.
This issue affects BIND 9 versions 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, and 9.20.9-S1 through 9.20.22-S1.
BIND 9 versions 9.18.0 through 9.18.48 and 9.18.11-S1 through 9.18.48-S1 are NOT affected. |
| authentik is an open-source identity provider. Versions 2025.12.4 and prior, and versions 2026.2.0-rc1 through 2026.2.2 were vulnerable to Authentication Bypass through SAML NameID XML Comment Injection. Due to how authentik extracted the NameID value from a SAML assertion, it was possible for an attacker to trick authentik into only seeing a part of the NameID value, potentially allowing an attacker to gain access to other accounts. This issue could be exploited on an authentik instance with a SAML Source, where the attacker had an account on the SAML Source and the ability to modify their NameID value (commonly username or E-mail), and XML Signing was enabled. The attacker could modify the SAML assertion given to authentik by injecting a comment within the NameID value, which effectively truncated the NameID value to the snippet before the comment, and gave the attacker access to any user account. This issue has been fixed in versions 2025.12.5 and 2026.2.3. |
| Allocation of Resources Without Limits or Throttling vulnerability in mtrudel bandit allows unauthenticated remote denial of service via memory exhaustion.
The chunked clause of 'Elixir.Bandit.HTTP1.Socket':read_data/2 in lib/bandit/http1/socket.ex ignores the caller-supplied :length option when reading HTTP/1 chunked request bodies. Instead of capping the accumulated body at the configured limit (e.g. Plug.Parsers' default 8 MB), do_read_chunked_data!/5 buffers every received chunk into an iolist unconditionally and materializes the entire body as a single binary. The function always returns {:ok, body, ...}, so callers cannot interpose a 413 response.
Because Plug.Parsers runs before routing and authentication in the standard Phoenix endpoint, an unauthenticated attacker needs no valid route or credentials. Sending a single Transfer-Encoding: chunked POST request with an arbitrarily large body to any path causes the BEAM process to exhaust available memory and be terminated by the OS OOM killer.
The content-length path in the same function correctly enforces the limit and is not affected.
This issue affects bandit: from 1.4.0 before 1.11.1. |
| Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in mtrudel bandit allows unauthenticated remote denial of service via worker process exhaustion.
'Elixir.Bandit.HTTP1.Socket':do_read_chunked_data!/5 in lib/bandit/http1/socket.ex terminates only when the last-chunk line 0\r\n is followed immediately by the empty trailer line \r\n. RFC 9112 ยง7.1.2 permits zero or more trailer fields between them. When trailers are present, none of the match clauses fit: the catch-all arm computes a negative to_read, calls read_available!/2, receives <<>> on timeout, and tail-recurses with unchanged state. The worker process is pinned for the lifetime of the TCP connection.
A handful of concurrent connections sending RFC-conformant chunked requests with trailer fields is sufficient to exhaust the Bandit worker pool and render the server unresponsive to all further traffic. No authentication, special headers, or large payload is required. Proxies such as NGINX and HAProxy legitimately forward trailer-bearing requests, so servers behind such proxies may be affected without any malicious client involvement.
This issue affects bandit: from 1.6.1 before 1.11.1. |
| Crypt::SaltedHash versions through 0.09 for Perl is susceptible to timing attacks.
These versions use Perl's built-in eq comparison. Discrepencies in timing could be used to guess the underlying hash. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Decrement re_receiving on the early exit paths
In the event that rpcrdma_post_recvs() fails to create a work request
(due to memory allocation failure, say) or otherwise exits early, we
should decrement ep->re_receiving before returning. Otherwise we will
hang in rpcrdma_xprt_drain() as re_receiving will never reach zero and
the completion will never be triggered.
On a system with high memory pressure, this can appear as the following
hung task:
INFO: task kworker/u385:17:8393 blocked for more than 122 seconds.
Tainted: G S E 6.19.0 #3
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u385:17 state:D stack:0 pid:8393 tgid:8393 ppid:2 task_flags:0x4248060 flags:0x00080000
Workqueue: xprtiod xprt_autoclose [sunrpc]
Call Trace:
<TASK>
__schedule+0x48b/0x18b0
? ib_post_send_mad+0x247/0xae0 [ib_core]
schedule+0x27/0xf0
schedule_timeout+0x104/0x110
__wait_for_common+0x98/0x180
? __pfx_schedule_timeout+0x10/0x10
wait_for_completion+0x24/0x40
rpcrdma_xprt_disconnect+0x444/0x460 [rpcrdma]
xprt_rdma_close+0x12/0x40 [rpcrdma]
xprt_autoclose+0x5f/0x120 [sunrpc]
process_one_work+0x191/0x3e0
worker_thread+0x2e3/0x420
? __pfx_worker_thread+0x10/0x10
kthread+0x10d/0x230
? __pfx_kthread+0x10/0x10
ret_from_fork+0x273/0x2b0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30 |
| Yii 2 is a PHP application framework. Versions 2.0.54 and prior contain flawed logic in the core view rendering method View::renderPhpFile() that leads to Local File Inclusion. The function calls extract($_params_, EXTR_OVERWRITE) before the require statement that loads the view file. As a result, a caller-controlled _file_ key in the $params array overwrites the internal local variable specifying which file to include, potentially enabling RCE if an attacker can write PHP files through a separate primitive, as well as information disclosure. This issue has been fixed in version 2.0.55. |
| Unspecified vulnerability in the QuickTime Movie Parser Filter in quartz.dll in DirectShow in Microsoft DirectX 7.0 through 9.0c on Windows 2000 SP4, Windows XP SP2 and SP3, and Windows Server 2003 SP2 allows remote attackers to execute arbitrary code via a crafted QuickTime media file, as exploited in the wild in May 2009, aka "DirectX NULL Byte Overwrite Vulnerability." |
| Use-after-free vulnerability in the Peer Objects component (aka iepeers.dll) in Microsoft Internet Explorer 6, 6 SP1, and 7 allows remote attackers to execute arbitrary code via vectors involving access to an invalid pointer after the deletion of an object, as exploited in the wild in March 2010, aka "Uninitialized Memory Corruption Vulnerability." |
| Heap-based buffer overflow in Adobe Reader and Acrobat 7.x before 7.1.4, 8.x before 8.1.7, and 9.x before 9.2 allows remote attackers to execute arbitrary code via a crafted PDF file that triggers memory corruption, as exploited in the wild in October 2009. NOTE: some of these details are obtained from third party information. |
| Trilium Notes is a cross-platform, hierarchical note taking application focused on building large personal knowledge bases. In versions 0.102.1 and prior, the Clipper API in Trilium Desktop (v0.101.3) allows full authentication bypass when running in an Electron environment. When Trilium detects an Electron environment, it explicitly disables authentication middleware for the Clipper API, exposing endpoints such as /api/clipper/notes to the network with no password, API token, or CSRF protection. An attacker on a shared network (for example, a corporate LAN or public Wi-Fi) can scan for open high-range ports using a tool like nmap, since Trilium often binds to ports such as 37840. Once a candidate port is found, an unauthenticated request to the Clipper handshake endpoint, which also bypasses authentication, confirms a Trilium instance by returning the application name and protocol version. This facilitates unauthorized data access, phishing, and local system compromise. The issue has been fixed in version 0.102.2. |
| Multiple heap out-of-bounds reads in the Spotlight RPC unmarshalling code in Netatalk 3.1.0 through 4.4.2 allow a remote authenticated attacker to obtain sensitive information or cause a minor service disruption. |
| Active debug code exists in the ARN resolver of amazon-mq rabbitmq-aws before version 0.2.1. A debug ARN scheme (arn:aws-debug:file) accepted by the PUT /api/aws/arn/validate validation endpoint might allow remote authenticated users to perform arbitrary file reads on any file accessible to the RabbitMQ process.
To remediate this issue, customers should upgrade to version 0.2.1 of rabbitmq-aws. If RabbitMQ is configured to use TLS for connections, we also recommend rotating any associated private certificate keys. |
| An out-of-bounds read in ASP session ID handling in Netatalk 1.3 through 4.4.2 allows an adjacent network attacker to obtain limited information or cause a denial of service via a crafted ASP request. |
| Incomplete sanitization of extended attribute (EA) path components in Netatalk 2.1.0 through 4.4.2 allows a remote authenticated attacker to write to files outside the intended metadata namespace via crafted EA names. |
