| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| WeeChat (Wee Enhanced Environment for Chat) is a free chat client. In versions 4.3.0 through 4.9.0, the WeeChat relay module's WebSocket permessage-deflate decompression function relay_websocket_inflate() has no upper bound on output size. An authenticated relay user can send a small compressed WebSocket frame (~100 bytes) that decompresses to gigabytes, exhausting all server memory and crashing the entire WeeChat process. The api protocol enables permessage-deflate and requires authentication before WebSocket upgrade. Version 4.9.1 patches the issue. |
| In Splunk Connect for Kafka versions below 2.2.7, an unauthenticated user who can reach the Kafka Connect Representational State Transfer (REST) API and influence responses from a Hypertext Transfer Protocol (HTTP) Event Collector endpoint in Splunk Enterprise could cause the connector to retry failed event batches until event delivery stops. The vulnerability is possible because HTTP Event Collector delivery retry handling uses an unbounded default for failed batches instead of a finite retry limit. For more information see Install Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/install/install-splunk-connect-for-kafka), Data ingestion parameters for Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/overview/data-ingestion-parameters-for-splunk-connect-for-kafka), and Set up and use HTTP Event Collector with configuration files (https://help.splunk.com/en/splunk-enterprise/get-data-in/get-started-with-getting-data-in/9.4/get-data-with-http-event-collector/set-up-and-use-http-event-collector-with-configuration-files) in the Splunk documentation. |
| In Splunk Connect for Kafka versions below 2.2.7, an unauthenticated user who can reach the Kafka Connect Representational State Transfer (REST) API could configure timestamp extraction with a crafted regular expression and matching event data to block a Kafka Connect worker thread, stopping event delivery for the affected connector. The vulnerability is possible because timestamp extraction evaluates customer-supplied regular expressions without a time limit. For more information see Install Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/install/install-splunk-connect-for-kafka) and Data ingestion parameters for Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/overview/data-ingestion-parameters-for-splunk-connect-for-kafka) in the Splunk documentation. |
| A vulnerability was determined in ggml-org llama.cpp bec4772f6. This affects the function rpc_server::graph_compute of the file ggml/src/ggml-rpc/ggml-rpc.cpp of the component ggml-RPC Server. Executing a manipulation can lead to null pointer dereference. The attack may be launched remotely. The pull request to fix this issue awaits acceptance. |
| justhtml before 1.18.0 contains multiple low-severity denial-of-service issues in CSS selector handling and linkification. Applications that evaluate attacker-controlled selector strings (via query(), matches(), or selector-based transforms), run selector matching over very large untrusted documents, construct DOM trees from untrusted structure, or enable linkification over attacker-controlled text may consume disproportionate CPU or memory. Triggers include oversized selectors, large selector lists, oversized compound selectors, long combinator chains, deeply nested functional pseudo-classes, repeated token/positional matching, cyclic DOM graphs causing non-terminating traversal, and punctuation-heavy or trailing-bracket linkification input. These are availability-only concerns and do not by themselves allow script execution, data disclosure, or sanitizer bypass. Default JustHTML(sanitize=True) usage is not expected to be exposed, since selectors are normally supplied by application code. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to uncontrolled recursion. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to cause a denial of service due to uncontrolled resource consumption. |
| Vulnerability in the Oracle Commerce Guided Search / Oracle Commerce Experience Manager product of Oracle Commerce (component: Experience Manager). The supported version that is affected is 11.4.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Commerce Guided Search / Oracle Commerce Experience Manager. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Commerce Guided Search / Oracle Commerce Experience Manager accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Commerce Guided Search / Oracle Commerce Experience Manager. CVSS 3.1 Base Score 9.1 (Confidentiality and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H). |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to unbounded recursion. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to uncontrolled resource consumption. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to uncontrolled resource consumption. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to improper handling of a missing SSL client certificate. |
| The O-RAN E2T I-Release Prometheus metric Increment function can crash in sctpThread.cpp for message.peerInfo->counters[IN_INITI][MSG_COUNTER][ProcedureCode_id_E2setup]->Increment(). |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic
(polling) path rejects it as -EPROTO. Worse, it returns without a
NACK+STOP: the next receive cycle has already started, so the target
keeps holding SDA and the bus stays stuck until a power cycle for
this i2c controller.
Reading I2DR to obtain the count likewise arms the next byte on the
count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly
and left the bus held.
Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so
the existing last-byte handling emits STOP; the dummy byte is discarded.
A count of 0 is a valid empty block read; a count above
I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus
has been released.
The interrupt-driven path has the same flaw from a later commit and is
fixed separately, as it carries a different Fixes: tag and stable range. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: fix refcount leak in i_ipmi_request()
When a caller provides a `supplied_recv` message to i_ipmi_request(),
the function increments the user's `nr_msgs` reference count. If an
error occurs later, the out_err cleanup path only frees the recv_msg
if the function allocated it itself (i.e., !supplied_recv). In the
supplied_recv case the cleanup is skipped, leaving the reference count
elevated. The caller ipmi_request_supply_msgs() does not release the
supplied_recv on error, so the reference is permanently leaked.
Fix this by explicitly reverting the reference count operations when a
supplied recv_msg with a valid user pointer is present in the error
path: decrement nr_msgs and drop the user's kref. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: defer destroy_previous_session() until after NTLM authentication
In ntlm_authenticate(), destroy_previous_session() is called using a
user pointer resolved from the client-supplied NTLM blob username field
before the NTLMv2 response is validated. An authenticated attacker can
set the NTLM blob username to match a victim account and set
PreviousSessionId to the victim's session ID; destroy_previous_session()
destroys the victim's session while ksmbd_decode_ntlmssp_auth_blob()
subsequently rejects the request with -EPERM.
Move destroy_previous_session() and the prev_id assignment to after
ksmbd_decode_ntlmssp_auth_blob() returns success and use sess->user
rather than the pre-authentication lookup result. This matches the
ordering already used by krb5_authenticate(), where
destroy_previous_session() is called only after
ksmbd_krb5_authenticate() returns success. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix SID memory leak in set_posix_acl_entries_dacl() on overflow
Commit 299f962c0b02 ("ksmbd: use check_add_overflow() to prevent u16
DACL size overflow") added check_add_overflow() guards that break out
of the ACE-building loops in set_posix_acl_entries_dacl() when the
accumulated DACL size would wrap past 65535.
However, each iteration allocates a struct smb_sid via kmalloc_obj()
at the top of the loop and relies on the kfree(sid) call at the end
of the loop body (the 'pass_same_sid' label in the first loop, and
the explicit kfree at the tail of the second loop) to release it.
The newly introduced 'break' statements bypass those kfree() calls,
leaking the sid buffer every time an overflow is detected.
A malicious or malformed file with enough POSIX ACL entries to trip
the overflow check will leak one or more struct smb_sid allocations
on every request that touches the file's DACL, providing a trivial
kernel memory exhaustion vector.
Free sid before breaking out of the loops to plug the leak. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: Fix a resource leak related to the scp device in FW initialization
On Mediatek devices with a system companion processor (SCP) the mtk_scp
structure has to be removed explicitly to avoid a resource leak.
Free the structure in case the allocation of the firmware structure fails
during the firmware initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: fix net namespace reference leak in reload
devlink_nl_reload_doit() calls devlink_netns_get(), which returns a net
with a held reference. When the requested namespace differs from the
current one and the reload action is not DRIVER_REINIT, the function
returns -EOPNOTSUPP without releasing the reference. Add the missing
put_net() on this error path. |
| A flaw in Node.js HTTP/2 server API can cause servers to keep accepting data even after sending a `GOAWAY` frame. This vulnerability affects two supported release lines: **Node.js 22** and **Node.js 24**. |
