| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When a libcurl-based application performs transfers via `SCP://` or `SFTP://`
and utilizes the `CURLOPT_SSH_KEYFUNCTION` callback, it may silently accept an
untrusted server. This vulnerability occurs when a server presents a host key
type that does not match the specific key type already recorded for that host
in the `known_hosts` file. Instead of rejecting the mismatch, the callback
mechanism fails to properly enforce the restriction, allowing the connection
to succeed without warning and risking a potential man-in-the-middle attack. |
| A vulnerability in libcurl caused the HTTP `Referer:` header to persist even
when explicitly cleared. While the documentation states that passing NULL to
`CURLOPT_REFERER` suppresses the header, the option failed to clear the
internal state. As a result, the previous referrer string was erroneously
reused and sent in subsequent requests, potentially leaking sensitive
information to unintended servers. |
| In this scenario, libcurl first uses a proper HTTP/3 server for the initial
transfers, and when it makes a second transfer to the same site it has been
replaced by the attacker's impostor machine - without a valid certificate.
When libcurl returns to the hostname the second time with a cached SSL session
(`CURLOPT_SSL_SESSIONID_CACHE` is not disabled) and early data enabled (the
`CURLSSLOPT_EARLYDATA` bit is set in `CURLOPT_SSL_OPTIONS`), libcurl might
send off the second request's bytes on that new connection *before* enforcing
the certificate verification failure. Potentially leaking sensitive
information. |
| libcurl would reuse a previously created connection even when some mTLS config
related option had been changed that should have prohibited reuse.
libcurl keeps previously used connections in a connection pool for subsequent
transfers to reuse if one of them matches the setup. However, some TLS
settings related to client certificates were left out from the configuration
match checks, making them match too easily. In particular options related to
the private key. |
| When asking curl to use a `.netrc` file to find credentials and at the same
time specifying a URL with a username (without a password), like
`https://user@example.com/`, curl could wrongly get and use the password for
*another* user set in the `.netrc` file for that host if such a one exists and
there is no match for the specified user. |
| A flaw in curl’s cookie parsing logic allows a malicious HTTP server to set
"super cookies" that bypass the Public Suffix List check. This enables an
attacker-controlled origin to inject cookies that curl subsequently scopes and
transmits to unrelated third-party domains. |
| libcurl might in some circumstances reuse the wrong connection when asked to
do Negotiate-authenticated ones, even when they are set to use different
"services".
libcurl features a pool of recent connections so that subsequent requests can
reuse an existing connection to avoid overhead.
When reusing a connection a range of criteria must be met. Due to a logical
error in the code, a request that was issued by an application could
wrongfully reuse an existing connection to the same server that was
authenticated using different services. |
| When asked to both use a `.netrc` file for credentials and to follow HTTP
redirects, libcurl could leak the password used for the first host to the
followed-to host under certain circumstances. |
| libcurl might in some circumstances reuse the wrong connection for SMB(S)
transfers.
libcurl features a pool of recent connections so that subsequent requests can
reuse an existing connection to avoid overhead.
When reusing a connection a range of criteria must be met. Due to a logical
error in the code, a network transfer operation that was requested by an
application could wrongfully reuse an existing SMB connection to the same
server that was using a different "share" than the new subsequent transfer
should.
This could in unlucky situations lead to the download of the wrong file or the
upload of a file to the wrong place. When this happens, the same credentials
are used and the server name is the same. |
| libcurl might in some circumstances reuse the wrong connection when asked to
do an authenticated HTTP(S) request after a Negotiate-authenticated one, when
both use the same host.
libcurl features a pool of recent connections so that subsequent requests can
reuse an existing connection to avoid overhead.
When reusing a connection a range of criteria must be met. Due to a logical
error in the code, a request that was issued by an application could
wrongfully reuse an existing connection to the same server that was
authenticated using different credentials.
An application that first uses Negotiate authentication to a server with
`user1:password1` and then does another operation to the same server asking
for any authentication method but for `user2:password2` (while the previous
connection is still alive) - the second request gets confused and wrongly
reuses the same connection and sends the new request over that connection
thinking it uses a mix of user1's and user2's credentials when it is in fact
still using the connection authenticated for user1... |
| libcurl can in some circumstances reuse the wrong connection when asked to do
an Negotiate-authenticated HTTP or HTTPS request.
libcurl features a pool of recent connections so that subsequent requests can
reuse an existing connection to avoid overhead.
When reusing a connection a range of criterion must first be met. Due to a
logical error in the code, a request that was issued by an application could
wrongfully reuse an existing connection to the same server that was
authenticated using different credentials. One underlying reason being that
Negotiate sometimes authenticates *connections* and not *requests*, contrary
to how HTTP is designed to work.
An application that allows Negotiate authentication to a server (that responds
wanting Negotiate) with `user1:password1` and then does another operation to
the same server also using Negotiate but with `user2:password2` (while the
previous connection is still alive) - the second request wrongly reused the
same connection and since it then sees that the Negotiate negotiation is
already made, it sends the request over that connection thinking it uses
the user2 credentials when it is in fact still using the connection
authenticated for user1...
The set of authentication methods to use is set with `CURLOPT_HTTPAUTH`.
Applications can disable libcurl's reuse of connections and thus mitigate this
problem, by using one of the following libcurl options to alter how
connections are or are not reused: `CURLOPT_FRESH_CONNECT`,
`CURLOPT_MAXCONNECTS` and `CURLMOPT_MAX_HOST_CONNECTIONS` (if using the
curl_multi API). |
| When a user invokes curl using a schemeless URL combined with
`--proto-default` sftp (or scp), a disconnect occurs between the tool layer
and libcurl. The tool layer incorrectly infers the URL scheme, which
erroneously bypasses the initialization of critical SSH security options like
CURLOPT_SSH_HOST_PUBLIC_KEY_SHA256 and CURLOPT_SSH_KNOWNHOSTS. Conversely, the
libcurl runtime successfully honors CURLOPT_DEFAULT_PROTOCOL and establishes
the connection via SFTP/SCP as specified. Because the tool layer skipped the
security configuration, these SSH host verification options are silently
omitted, causing curl to connect to an unverified SSH remote host without
throwing an error. |
| Successfully using libcurl to do a transfer to a specific HTTP origin
(`hostA`) with **Digest** authentication and then changing the origin to a
different one (`hostB`) for a second transfer, reusing the same handle, makes
libcurl wrongly pass on the `Authorization:` header field meant for `hostA`,
to `hostB`. |
| When doing TLS related transfers with reused easy or multi handles and
altering the `CURLSSLOPT_NO_PARTIALCHAIN` option, libcurl could accidentally
reuse a CA store cached in memory for which the partial chain option was
reversed. Contrary to the user's wishes and expectations. This could make
libcurl find and accept a trust chain that it otherwise would not. |
| When an OAuth2 bearer token is used for an HTTP(S) transfer, and that transfer
performs a cross-protocol redirect to a second URL that uses an IMAP, LDAP,
POP3 or SMTP scheme, curl might wrongly pass on the bearer token to the new
target host. |
| When doing multi-threaded LDAPS transfers (LDAP over TLS) with libcurl,
changing TLS options in one thread would inadvertently change them globally
and therefore possibly also affect other concurrently setup transfers.
Disabling certificate verification for a specific transfer could
unintentionally disable the feature for other threads as well. |
| When using `CURLOPT_PINNEDPUBLICKEY` option with libcurl or `--pinnedpubkey`
with the curl tool, curl should check the public key of the server certificate
to verify the peer.
This check was skipped in a certain condition that would then make curl allow
the connection without performing the proper check, thus not noticing a
possible impostor. To skip this check, the connection had to be done with QUIC
with ngtcp2 built to use GnuTLS and the user had to explicitly disable the
standard certificate verification. |
| curl's WebSocket code did not update the 32-bit mask pattern for each new
outgoing frame as the specification says. Instead it used a fixed mask that
persisted and was used throughout the entire connection.
A predictable mask pattern allows for a malicious server to induce traffic
between the two communicating parties that could be interpreted by an involved
proxy (configured or transparent) as genuine, real, HTTP traffic with content
and thereby poison its cache. That cached poisoned content could then be
served to all users of that proxy. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-io: report non-retryable errors separatedly
The error codes BLK_STS_NOTSUPP and BLK_STS_INVAL should not cause leg
failure on dm-raid1. This patch changes the interface to dm-io, so that
it reports two error bitmaps - error_bits and unsup_bits. The unsup_bit
bitmap tracks BLK_STS_NOTSUPP or BLK_STS_INVAL errors, the error_bits
bitmap tracks all the other errors.
dm-raid1 is changed so that it won't fail a leg if it receives an error
in the unsup_bits bitmap.
This patch (with 62dc37a819a5) fixes misbehavior if the user uses
unaligned bio vectors on dm-raid1. |
| A web interface reflects a portion of the request URL into a script context and a hyperlink attribute without adequate encoding, and does not require authentication to reach. This allows an unauthenticated network attacker to craft a link that, when visited by a user, executes arbitrary script in the context of the affected application and can redirect the user's browser to an arbitrary external site. Successful exploitation could allow an attacker to act with the compromised user's session privileges within the application. |
