| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incorrect access control in the meshInfoKick function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to kick or clean stale mesh information/state and trigger regeneration of mesh metadata via sending a crafted MQTT message to the cs_broker component. |
| Incorrect access control in the updateSlaveIpList function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to overwrite the slave IP inventory state via sending a crafted MQTT message to the cs_broker component. |
| Signum Node is a HDD-mined cryptocurrency using an energy efficient and fair Proof-of-Commitment (PoC+) consensus algorithm. Prior to version 3.9.9, an integer overflow in BlockServiceImpl.applyBlock() allowed a miner to receive an arbitrarily inflated block reward by crafting a block with a negative totalFeeCashBackNqt value. The vulnerability was introduced when the SMART_FEES hardfork (block ~1,029,000) enabled fee cash-back and burn accounting without overflow protection. This issue has been patched in version 3.9.9. |
| Dell SmartFabric OS10 Software, versions prior to 10.5.6.14, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of a deferred file_lock on SMB2_CLOSE then SMB2_CANCEL
Commit f580d27e8928 ("ksmbd: fix use-after-free of a deferred file_lock on
double SMB2_CANCEL") made smb2_cancel() skip a work whose state is
KSMBD_WORK_CANCELLED, so its cancel_fn cannot be fired a second time. But
KSMBD_WORK has three states (ACTIVE, CANCELLED, CLOSED), and the same
freeing producer path is reached for CLOSED too:
SMB2_CLOSE on the locking handle -> set_close_state_blocked_works() sets
the deferred work's state to KSMBD_WORK_CLOSED and wakes the smb2_lock()
worker. The worker takes the non-ACTIVE early-exit, locks_free_lock()s
the file_lock and, because the state is not KSMBD_WORK_CANCELLED, takes
the STATUS_RANGE_NOT_LOCKED branch with "goto out2" -- which, like the
cancelled branch, skips release_async_work(). The work stays on
conn->async_requests with a live cancel_fn = smb2_remove_blocked_lock
pointing at the freed file_lock.
A subsequent SMB2_CANCEL for the same AsyncId then passes the
KSMBD_WORK_CANCELLED-only guard (its state is KSMBD_WORK_CLOSED), so
smb2_cancel() fires cancel_fn again over the freed file_lock -- the same
use-after-free fixed, via SMB2_CLOSE instead of a first SMB2_CANCEL:
BUG: KASAN: slab-use-after-free in __locks_delete_block
__locks_delete_block
locks_delete_block
ksmbd_vfs_posix_lock_unblock
smb2_remove_blocked_lock
smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn
handle_ksmbd_work
Allocated by ...: locks_alloc_lock <- smb2_lock
Freed by ...: locks_free_lock <- smb2_lock (non-ACTIVE early-exit)
... cache file_lock_cache of size 192
Reproduced on mainline 7.1-rc7 (which already contains f580d27e8928) with
KASAN by an authenticated SMB client; the double-SMB2_CANCEL control is
silent on that kernel, so the splat is attributable to the CLOSE trigger.
Only an ACTIVE deferred work may have its cancel_fn fired: both terminal
states (CANCELLED and CLOSED) reach the smb2_lock() early-exit that frees
the file_lock and skips release_async_work(). Guard on KSMBD_WORK_ACTIVE
so any non-active work is skipped. |
| elFinder is an open-source file manager for web, written in JavaScript using jQuery UI. Prior to 2.1.70, elFinder URL uploads in php/elFinder.class.php can bypass server-side request forgery protections when PHP cURL is unavailable because validate_address() validates $info['ip'], but get_remote_contents() selects fsock_get_contents(), which connects to $arr['host'] and performs a second DNS resolution. An attacker able to submit a URL upload can use DNS rebinding to have the first resolution return a public address and the connection resolution return a loopback or private address, causing the internal HTTP response body to be stored as an uploaded file and made readable through elFinder. After a successful fetch, get_headers($url, true) separately requests the original hostname without reusing the validated and pinned connection, creating an additional blind server-side request forgery path even when curl_get_contents() is selected. This issue is fixed in version 2.1.70. |
| Livewire is a full-stack framework for Laravel. From 3.0.0-beta.1 until 3.8.3 and 4.3.4, the dot-notated query-string parser in js/plugins/history/index.js, including fromQueryString() and insertDotNotatedValueIntoData(), accepts the __proto__, constructor, and prototype path segments and creates inherited objects. Client-side state handlers then access effects.html, effects.js, effects.xjs, and effects.scripts without Object.prototype.hasOwnProperty.call(), allowing inherited attacker-controlled state to be treated as trusted effects. An unauthenticated attacker can craft a URL that, when opened by a user, executes arbitrary JavaScript in the affected application's origin. Exploitation requires user interaction and does not bypass server-side authorization or grant privileges beyond the affected user. This issue is fixed in versions 3.8.3 and 4.3.4. |
| Kirby is an open-source content management system. From 5.0.0 until 5.5.2, Kirby's REST API chunk upload handler in src/Api/Upload.php did not run the relevant upload authorization preflight in Kirby\Api\Upload::process() before Kirby\Api\Upload::processChunk() persisted chunk data. An authenticated user with the access.panel permission enabled but with files.create, files.replace, and user/users.update permissions disabled could submit requests with an Upload-Length header and leave unfinished chunks in site/cache/.uploads for 24 hours. Repeating this process could consume attacker-controlled temporary storage, prevent other users from uploading files, or prevent site logic from storing data, although final permission checks still prevented unauthorized files from reaching the content or site/accounts directories. This issue is fixed in version 5.5.2. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: digi_acceleport: fix broken rx after throttle
If the port is closed while throttled, the read urb is never resubmitted
and the port will not receive any further data until the device is
reconnected (or the driver is rebound).
Clear the throttle flags and submit the urb if needed when opening the
port. |
| An authenticated user with low-privileged access could submit crafted input through the web-based management interface to execute arbitrary commands on the underlying operating system. |
| Previously, after a channel has been established, a malicious peer could send crafted messages that would deadlock the entire connection. Now, we handle all RFC 4254 channel messages; global requests are handled explicitly. Then, treat all other messages as a protocol error and tear the connection down instead of buffering and blocking. |
| Unauthenticated Server Side Request Forgery (SSRF) in LiteSpeed Cache <= 7.9 versions. |
| Improper handling of an unexpected value size in the decryption path of a client-side encryption library can cause a failed internal check that terminates the process using the library. A party able to place a suitably formed encrypted value where an application will decrypt it, or able to control the responses the application receives, may cause that application to stop running. |
| A double free in the OpenSSL-based TLS certificate revocation checking path of the MongoDB C Driver can be reached by a TLS endpoint that the client already trusts. During the handshake, specially formed certificate data can cause the same heap object to be released twice. An unauthenticated party acting as the trusted endpoint may cause the connecting client application to terminate unexpectedly. |
| Subscriber Privilege Escalation in WCFM Membership <= 2.11.11 versions. |
| Unauthenticated Cross Site Scripting (XSS) in RTMKit <= 2.1.5 versions. |
| Unauthenticated SQL Injection in GeoDirectory <= 2.8.174 versions. |
| Unauthenticated PHP Object Injection in JobSearch <= 3.2.0 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - fix VF2PF work teardown race in adf_disable_sriov()
The VF2PF interrupt handler queues PF-side response work that stores a
raw pointer to per-VF state (struct adf_accel_vf_info). Currently,
adf_disable_sriov() destroys per-VF mutexes and frees vf_info without
stopping new VF2PF work or waiting for in-flight workers to complete. A
concurrently scheduled or already queued worker can then dereference
freed memory.
This manifests as a use-after-free when KASAN is enabled:
BUG: KASAN: null-ptr-deref in mutex_lock+0x76/0xe0
Write of size 8 at addr 0000000000000260 by task kworker/24:2/...
Workqueue: qat_pf2vf_resp_wq adf_iov_send_resp [intel_qat]
Call Trace:
kasan_report+0x119/0x140
mutex_lock+0x76/0xe0
adf_gen4_pfvf_send+0xd4/0x1f0 [intel_qat]
adf_recv_and_handle_vf2pf_msg+0x290/0x360 [intel_qat]
adf_iov_send_resp+0x8c/0xe0 [intel_qat]
process_one_work+0x6ac/0xfd0
worker_thread+0x4dd/0xd30
kthread+0x326/0x410
ret_from_fork+0x33b/0x670
Add a PF-local flag, vf2pf_disabled, that gates work queueing, worker
processing, and interrupt re-enabling during teardown. Set this flag
atomically with the hardware interrupt mask inside
adf_disable_all_vf2pf_interrupts(). After masking, synchronize the AE
cluster MSI-X interrupt and flush the PF response workqueue before
tearing down per-VF locks and state so all in-flight work completes
before vf_info is destroyed.
Introduce adf_enable_all_vf2pf_interrupts() to clear the flag and
unmask all VF2PF interrupts under the same lock when SR-IOV is
re-enabled. This ensures the software flag and hardware state transition
atomically on both the enable and disable paths. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: krb5 - filter out async aead implementations at alloc
krb5_aead_encrypt(), krb5_aead_decrypt() in rfc3961_simplified.c and
rfc8009_encrypt(), rfc8009_decrypt() in rfc8009_aes2.c set a NULL
completion callback and treat any negative return from
crypto_aead_{encrypt,decrypt}() as terminal, falling through to
kfree_sensitive(buffer). When the encrypt_name resolves to an
async AEAD instance the request returns -EINPROGRESS, the buffer
is freed while the backend's worker still holds a pointer, and the
worker dereferences the freed slab on completion.
KASAN report under UML+SLUB with a synthetic async aead backend
bound to krb5->encrypt_name:
BUG: KASAN: slab-use-after-free in t5_stub_complete+0x7d/0xc7
The helpers were written synchronously, so filter the async
instances out at allocation time instead of plumbing
crypto_wait_req() through every call site.
Reachable via net/rxrpc/rxgk.c, fs/afs/cm_security.c and
net/ceph/crypto.c on systems with an async AEAD provider bound to
the krb5 enctype name. |
