| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| shell-quote's `quote()` function did not validate object-token inputs against the operator model used by `parse()`. The `.op` field was backslash-escaped character by character using `/(.)/g`, which in JavaScript does not match line terminators (\n, \r, U+2028, U+2029). A line terminator in `.op` therefore passed through unescaped into the output; POSIX shells treat a literal newline as a command separator, so any content after it would execute as a second command. The vulnerable code path is reachable in two ways: (1) direct construction of `{ op: '...\n...' }` from external input, and (2) via `parse(cmd, envFn)` when `envFn` returns object tokens whose `.op` is attacker-influenced. Both are documented API surface. Fixed by replacing the per-character escape with strict shape validation: `.op` must match the parser's control-operator allowlist; `{ op: 'glob', pattern }` validates `pattern` and forbids line terminators; `{ comment }` validates `comment` and forbids line terminators; any other object shape throws `TypeError`. |
| Unauthenticated Denial of Service Attack in Really Simple SSL <= 9.8.0 versions. |
| A vulnerability exists in the command line interface of AOS-CX that may allow for improper processing of malformed input. Successful exploitation could result in the execution of arbitrary commands with root privileges. |
| Command injection vulnerabilities in the API endpoint of AOS-CX could allow an authenticated remote attacker with administrative privileges to inject arbitrary commands. Successful exploitation could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system. |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, SslClientHelloHandler.decode() reads the 24-bit TLS handshake length and, when the ClientHello does not fit in the first record, eagerly allocates `ctx.alloc().buffer(handshakeLength)` (line 161). The guard at line 140 is `handshakeLength > maxClientHelloLength && maxClientHelloLength != 0`, and the commonly-used SniHandler/AbstractSniHandler constructors (SniHandler(Mapping), SniHandler(AsyncMapping), AbstractSniHandler()) pass maxClientHelloLength=0 and handshakeTimeoutMillis=0, so the length guard is disabled and no timeout is scheduled. A 16 MiB request exceeds the default pooled chunk size and becomes a huge/unpooled allocation performed immediately. The buffer is retained in the handler until the channel closes. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
| In Micrometer, it is possible for a user to provide specially crafted HTTP requests that may cause a denial-of-service (DoS) condition.
Affected versions:
micrometer-core 1.16.0 through 1.16.5; 1.15.0 through 1.15.11; 1.14.0 through 1.14.15; 1.13.0 through 1.13.18; 1.9.0 through 1.9.17.
micrometer-jetty11 1.16.0 through 1.16.5; 1.15.0 through 1.15.11; 1.14.0 through 1.14.15; 1.13.0 through 1.13.18.
micrometer-jetty12 1.16.0 through 1.16.5; 1.15.0 through 1.15.11; 1.14.0 through 1.14.15; 1.13.0 through 1.13.18. |
| In Micrometer, it is possible for a user to provide specially crafted gRPC requests that may cause a denial-of-service (DoS) condition.
Affected versions:
Micrometer 1.16.0 through 1.16.5; 1.15.0 through 1.15.11. |
| Well-crafted inputs reaching ParseAddress, ParseAddressList, and ParseDate were able to trigger excessive CPU exhaustion and memory allocations. |
| stomper 5e2741e is vulnerable to Denial of Service. A malicious client can send partial STOMP frames and keep the TCP connections open, which, combined with the broker s use of edge-triggered epoll (EPOLLET) and MSG_PEEK in recv(), causes sockets to enter a permanent half-read state. When enough such connections accumulate, the broker stops receiving any further epoll events for those sockets and eventually hangs in epoll_wait, effectively refusing to process new messages. |
| Impact:
The undici WebSocket client enforces maxPayloadSize on the cumulative byte count of fragments in a message but does not enforce a limit on the number of fragments. A malicious WebSocket server can stream many small or empty continuation frames that each pass per-frame and cumulative-size validation, collectively causing unbounded memory growth in the client process. The result is memory exhaustion and a denial of service.
Affected applications are those using the undici WebSocket client (new WebSocket(...)) or the WebSocketStream API that can be induced to connect to an attacker-controlled or compromised WebSocket endpoint.
All releases starting at undici 6.17.0 are affected.
Patches: Upgrade to undici >= 6.26.0, >= 7.28.0, or >= 8.5.0. Workarounds:
No workaround is available. The fix must be applied through an upgrade. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/hv-gpci: fix preempt count leak in sysfs show paths
Four sysfs show() callbacks in hv-gpci take get_cpu_var(hv_gpci_reqb)
(which calls preempt_disable()) but only call the matching put_cpu_var()
on the error path under the 'out:' label. Every successful read leaks
one preempt_disable():
processor_bus_topology_show()
processor_config_show()
affinity_domain_via_virtual_processor_show()
affinity_domain_via_domain_show()
(affinity_domain_via_partition_show() was already correct.)
On a CONFIG_PREEMPT=y kernel, repeated reads raise preempt_count and
eventually return to userspace with preemption still disabled. The
next user-mode page fault then hits faulthandler_disabled() == 1,
gets forced to SIGSEGV, and the resulting coredump trips
'BUG: scheduling while atomic' in call_usermodehelper_exec ->
wait_for_completion_state -> schedule:
BUG: scheduling while atomic: <task>/<pid>/0x00000004
...
__schedule_bug+0x6c/0x90
__schedule+0x58c/0x13a0
schedule+0x48/0x1a0
schedule_timeout+0x104/0x170
wait_for_completion_state+0x16c/0x330
call_usermodehelper_exec+0x254/0x2d0
vfs_coredump+0x1050/0x2590
get_signal+0xb9c/0xc80
do_notify_resume+0xf8/0x470
Add an out_success label that calls put_cpu_var() before returning
the byte count, mirroring affinity_domain_via_partition_show(). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: starfive - Do not free stack buffer
RSA text data uses variable length buffer allocated in software stack.
Calling kfree on it causes undefined behaviour in subsequent operations. |
| Unauthenticated Denial of Service Attack in WP Go Maps <= 10.1.08 versions. |
| An issue in the NssaiAvailabilitySubscriptionCreate component of free5gc v4.0.1 allows attackers to cause a Denial of Service (DoS) via a crafted POST request. |
| Dell PowerStore contains a Command Injection vulnerability. An authenticated user with limited privileges could potentially exploit this vulnerability to execute arbitrary commands with root privileges. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.16.1, an attacker can craft a PDF that causes pypdf/_doc_common.py _get_outline to consume long runtimes and large amounts of memory when retrieving document outlines with large numbers of entries or deeply nested reused paths because the traversal lacked global entry-count and nesting-depth limits. This issue is fixed in version 6.16.1. |
| Apache Wicket enforces the upload limits configured on a form or upload field while parsing a multipart request with Apache Commons FileUpload. If the request body has already been consumed by another component, Commons FileUpload returns no items and Wicket falls back to reading the upload through HttpServletRequest#getParts(). The per-file size limit (for example Form#setFileMaxSize) and the file count limit (Form#setFileCountMax) are not applied to the parts obtained that way, and no exception is raised, so the upload is processed as though those limits had been satisfied. A remote uploader can therefore submit files that are larger, or more numerous, than the application permits, up to whatever the component that parsed the request allows. A part carrying no Content-Type header is additionally read into memory in full during parsing, so the size of that allocation is determined by the request and bounded only by those same external limits.
The total upload size limit (Form#setMaxSize) is not affected. Commons FileUpload compares the declared Content-Length against it before reading the body, so a request declaring an oversized length is rejected before the fallback is reached.
The fallback is reached in deployments where a servlet or filter has already parsed the request body — for example a servlet annotated with @MultipartConfig, Spring Boot's multipart resolver, or any filter that calls HttpServletRequest#getParameter() on a multipart request. It applies to the Wicket components that accept uploads on that path, including Form with FileUploadField, FileUploadToResourceField and AjaxFileDropBehavior. Applications that configure neither a per-file nor a file-count limit are not affected, as Wicket applies neither by default.
This issue affects Apache Wicket: from 8.0.0 through 8.18.0, from 9.0.0 through 9.23.0, from 10.0.0 through 10.10.0.
Users are recommended to upgrade to version 8.19.0, 9.24.0 or 10.11.0, which fix the issue. Users of Apache Wicket 7.x or older, which are no longer supported, should upgrade to a supported version. As a workaround, configure equivalent limits in the component that parses the request — for example spring.servlet.multipart.max-file-size and max-request-size, or maxFileSize and maxRequestSize in @MultipartConfig or in the web.xml <multipart-config> element. |
| Vulnerabilities in an API endpoint of HPE Networking Fabric Composer could allow an unauthenticated remote attacker to conduct a denial of service attack. Successful exploitation could allow an attacker to make limited unauthorized modifications to the underlying operating system and disrupt the availability of the affected system, requiring manual intervention to restore functionality. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.16.1, an attacker can craft a PDF that causes pypdf/_page.py PageObject._extract_text and PageObject.extract_xform_text to traverse a directed acyclic graph of reused form XObjects in which each form invokes a child multiple times, creating exponentially many traversal paths and causing long runtimes and large memory consumption. This issue is fixed in version 6.16.1. |
| Exploitation through affected command-line operations could allow an authenticated low-privileged user to execute arbitrary commands as a privileged user on the underlying operating system. |
