| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Race condition, use-after-free in the Audio/Video component. This vulnerability was fixed in Thunderbird 157 and Firefox 157. |
| Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in Apache Camel PQC component.
This issue affects Apache Camel: from 4.12.0 before 4.18.5, from 4.19.0 before 4.22.1.
The producer held a single java.security.Signature instance and used it for every exchange without synchronizing access. Signature is stateful and is not thread safe: update() accumulates the data to be signed or verified, and verify() consumes that accumulated state. With concurrent exchanges sharing one instance the update and verify calls of different messages interleave, so a verification can complete against data that belongs to another exchange, or against a partially accumulated buffer. The outcome is non-deterministic and includes a verification reporting success for a message whose signature was never actually checked, which defeats the guarantee the component exists to provide. Reaching it requires concurrent traffic through the same endpoint, which is the ordinary condition for a Camel route under load.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The Signature instance is no longer shared across concurrent exchanges. For deployments that cannot upgrade immediately, restrict the affected route to a single concurrent consumer so that no two exchanges use the instance at once. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| kqueue_fork_copy_knote() indexed into the child's file descriptor table using a knote's file descriptor number without a bounds check. Because the child's table is copied before knotes are transferred, a concurrent thread in the parent could grow the parent's table and register knotes with file descriptor numbers beyond the end of the child's table, causing an out-of-bounds read.
An unprivileged local user may be able to exploit these races to escalate privileges. |
| When copying knotes from a parent kqueue to a child, the copy code did not correctly exclude marker knotes (used internally to track list traversal position) before marking them as in-flux and releasing the kqueue lock. If another thread freed a marker while the lock was dropped, the subsequent in-flux decrement operated on freed memory.
An unprivileged local user may be able to exploit these races to escalate privileges. |
| Heap-based buffer overflow in Windows Device Association Service allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
net: libwx: fix races in Tx timestamp handling
wx->ptp_tx_skb is shared between the Tx path, the PTP auxiliary
worker and the timestamp cleanup paths. The
WX_STATE_PTP_TX_IN_PROGRESS bit prevents multiple Tx paths from
submitting timestamp requests, but does not serialize the worker
against cleanup.
As a result, wx_ptp_clear_tx_timestamp() can free an skb after
wx_ptp_tx_hwtstamp_work() has obtained its pointer. The worker may
then pass the freed skb to skb_tstamp_tx() and release the same
reference again.
The cleanup path may also clear the in-progress bit while the worker
is still processing the old skb. This allows the Tx path to publish a
new skb which the worker can subsequently overwrite with NULL,
leaking its reference.
Add a dedicated spinlock to protect publication and consumption of
the Tx timestamp skb. Detach the skb and clear the in-progress bit
while holding the lock, then deliver the timestamp and release the skb
after dropping it. Use the same locked cleanup in the quiesce path,
but keep the detach there free of register accesses: quiesce runs
during PCIe error recovery, where MMIO is not reliable, and it
deliberately did not touch the device before. The lock is taken with
interrupts disabled, because netpoll can call ndo_start_xmit() with
hard interrupts already off.
When handling a Tx DMA mapping failure, keep the transmit path
reference until after comparing the skb under the lock. This prevents
skb address reuse from making the error path mistake a newer timestamp
request for the failed one. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: fix incorrect RCU teardown order
i915_gem_busy_ioctl uses dma_resv_for_each_fence_unlocked() to iterate
over the fences in an GEM object without holding a reference but only
the RCU read side lock.
What can happen here is that the GEM object is destroyed concurrently
while i915_gem_busy_ioctl is still running. This won't free the GEM
objects memory, but still drops all the dma_fence references.
Now when dma_resv_for_each_fence_unlocked() sees a destroyed dma_fence it
assumes that a new fence list was installed and re-starts the loop.
But in the case of a destroyed GEM object a new fence list is never
installed, only the old one freed and therefore the iteration never
finishes resulting in an endless loop.
The solution is to drop the fence references only after the RCU grace
period.
The fixes tag is not necessary the patch introducing the problem, but the
one making it so worse that we need to address it.
This problem was pointed out by Sashiko-bot.
(cherry picked from commit 5113479556025093bf8133bb2dcaa33be2d50921) |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: replace bind when learning local endpoint
struct ovpn_bind is published through peer->bind with RCU, but local
endpoint learning updates bind->local in place under peer->lock. UDP TX
reads the field without that lock. In particular, a concurrent IPv6
update can therefore result in a torn address read.
Use ovpn_peer_reset_sockaddr to publish a replacement bind when learning
a new local endpoint, just as a remote endpoint change does. Preserve
the current remote address and reset the dst cache only after the new
bind has been published successfully.
Track remote endpoint changes separately so that float notification and
transport-address rehashing remain limited to actual peer floats. |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: cdev: fix back-transition for iso_resource_auto client resource
The todo member of iso_resource_auto structure represents the state of the
client resource and normally transitions in the following order:
ISO_RES_AUTO_ALLOC -> ISO_RES_AUTO_REALLOC -> ISO_RES_AUTO_DEALLOC
However, concurrent access from the work item and the file descriptor
release function can cause the state to transition backwards from
ISO_RES_AUTO_DEALLOC to ISO_RES_AUTO_REALLOC.
Prevent the back-transition by checking the current state before
updating it in the work item. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: riscv: Fix NACL hfence entry update order
The SBI v3.0 specification (section 15.1.2) requires a nested HFENCE
entry to be populated as follows:
1) find an unused entry with Config.Pending == 0
2) update the Page_Number and Page_Count words
3) update the Config word with Config.Pending set
__kvm_riscv_nacl_hfence() writes the Config word first, so the SBI
implementation (or NACL hardware) can observe a pending entry with
pnum/pcount values left over from the previous use of that entry,
resulting in incorrect TLB flush ranges.
Write pnum and pcount first and the Config word last. Since the
consumer is an external agent on coherent shared memory, use
WRITE_ONCE() to stop the compiler from reordering the stores and
smp_wmb() to make the parameter words globally visible before the
Pending bit is set. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix dst leak for uncached routes.
ip6_route_output_flags(), ip6_rt_put_flags(), and ip6_dst_check()
detect an uncached route by list_empty(&rt->dst.rt_uncached),
which replaced the static DST_NOCACHE flag check in commit
a4c2fd7f7891 ("net: remove DST_NOCACHE flag").
When a device is unregistered, rt6_uncached_list_flush_dev()
unlinks uncached routes tied to the device from rt6_uncached_list.
Previously, they were moved to another list with list_move()
(__list_del_entry() + list_add()), and since commit 98aa546af5e4
("inet: remove (struct uncached_list)->quarantine"), the routes
are just unlinked with list_del_init().
If list_del_init() runs concurrently, list_empty() evaluates to
true; ip6_route_output_flags() calls dst_hold_safe() incorrectly
and ip6_rt_put_flags() skips ip6_rt_put(), leaking dst, and thus
dev tied via rt->from as well.
The same race is partially fixed by commit 9a6f0c4d5796 ("dst:
fix races in rt6_uncached_list_del() and rt_del_uncached_list()").
Let's check rt6->dst.rt_uncached_list instead.
Note that IPv4 does not have the same issue. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix race between perf_event_exit_task() and perf_pending_task()
A race condition exists between perf_event_exit_task() and
perf_pending_task() during begin_new_exec().
During begin_new_exec(), perf_event_exit_task() may be called, and the
PF_EXITING flag is not set on task. So perf_sigtrap() continues to execute
and triggers WARN_ON_ONCE(event->ctx->task != current).
Since both task exit and exec paths can call perf_event_exit_task() which
sets ctx->task to TASK_TOMBSTONE, fix this by explicitly checking if
event->ctx->task equals TASK_TOMBSTONE and dropping the redundant
PF_EXITING check. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: Set AW_FLUSH_MODE alongside AW_FLUSH when flushing the mailbox
When tearing down the FW mailbox Rx ring, fbnic_mbx_reset_desc_ring()
writes AW_CFG with FLUSH set and everything else, BME included, cleared.
Clearing BME halts the device's writes to the host but leaves the staged
requests parked in the PUL write pipeline rather than draining them, so
on the write path FLUSH alone never terminates the outstanding requests
and the flush the firmware waits on never completes.
Add the FLUSH_MODE definition and set both bits so the staged writes
drain out of the pipeline on their own. BME stays cleared, so nothing
lands on the host; it is restored later in fbnic_mbx_init_desc_ring()
when the ring is rebuilt, once the outstanding writes are gone.
The read path is unaffected. AR_CFG has no equivalent mode bit and
AR_FLUSH terminates the outstanding reads by itself, so it is left as
is.
Both writes remain plain stores rather than read-modify-writes. That is
deliberate: the matching write in fbnic_mbx_init_desc_ring() restores
BME and the TLP attributes, and clears both flush bits as a side effect. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_queue: hold nfnl mutex in event notifier
We must serialize the release notifier and the config netlink function.
A concurrent thread can issue close() which can call the release function
while unrelated socket processes UNBIND request for same portid:
Oops: general protection fault, [..]
RIP: 0010:__instance_destroy+0x60/0x210 [nfnetlink_queue]
Call Trace:
nfqnl_recv_config+0x9b0/0xdc0 [nfnetlink_queue]
nfnetlink_rcv_msg+0x7c2/0xeb0
? __pfx_nfnetlink_rcv_msg+0x10/0x10
After this, parallel UNBIND and URELEASE events are impossible.
This change isn't nice, but its the shortest fix given instances
are not refcounted and the nfnetlink config callback drops the
rcu read lock early due to need for sleeping allocations. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix potential races in dat skey functions
When dat_cond_set_storage_key() finds a large page, it will
conditionally set the storage key in absolute memory using
large_crste_to_phys() to get the absolute address.
There is a race window between dat_entry_walk() and
large_crste_to_phys(): the large page could have been split
concurrently, and large_crste_to_phys() might be called with a crste
that does not designate a large page, leading to crashes.
Similar issues were also present in dat_set_storage_key().
dat_get_storage_key() and dat_reset_reference_bit() did instead check
for a potential concurrent splitting of the large page, but then
handled it incorrectly.
Fix by performing a READ_ONCE on the crste pointer, checking and using
the result, instead of dereferencing the pointer again. In case a race
is detacted, try dat_entry_walk() again. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: serialize buffer teardown with mode claims
Buffer-mode claims hold mlock to guarantee that the device remains in
buffer mode until the claim is released. Normal buffer updates take
info_exist_lock followed by mlock in iio_update_buffers().
However, iio_device_unregister() disables and deactivates all buffers
without taking mlock. This can invalidate buffer state, including
active_scan_mask, while a buffer-mode claim is held.
Take mlock in iio_disable_all_buffers() so that unregister honors the
mode-claim lifetime guarantee. The info_exist_lock -> mlock ordering
matches iio_update_buffers(). |
| In the Linux kernel, the following vulnerability has been resolved:
tty: port: fix tty_port_tty_vhangup() race
Drivers rely on tty_port_tty_vhangup() to synchronously hang up their
ports before tearing down resources as part of deregistration (e.g. on
physical disconnect).
If tty_port_tty_vhangup() races with another hangup it may however
return before the port has been shut down. This is in turn can lead to
use-after-free and NULL-pointer dereferences in racing ioctls (including
a synchronous hangup) and in processing of racing asynchronous hangups
(carrier loss).
Add the missing serialisation to tty_port_tty_vhangup() and
tty_port_hangup() so that the former does not return until the port has
been shut down also when there is a racing hangup.
Note that serial core does not use tty_port_hangup(), but it already
holds the port mutex when clearing port->tty and shutting down the port
in uart_hangup(). |
| In the Linux kernel, the following vulnerability has been resolved:
USB: dwc2: shut down wakeup timer before freeing HCD state
dwc2_wakeup_detected() accesses the DWC2 host state and can rearm the
wakeup timer. dwc2_hcd_free() currently deletes the timer only after
freeing host-owned state, and timer_delete() does not synchronize a
callback or prevent it from being queued again.
Stop and shut down the timer in dwc2_hcd_release(), before the HCD
resources are freed. This covers both the HCD initialization error path
and normal HCD removal. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: gadget: dummy-hcd: Fix wait for outstanding request completions
The dummy-hcd driver emulates synchronize_irq() by waiting until its
private callback_usage counter drops to 0 (with the private lock not
held). This counter is incremented whenever a gadget driver callback
occurs (which requires the private lock to be dropped), but not when a
request completion handler is called.
This is an oversight. Request completion is triggered by timer
interrupts (emulating device IRQs in a real UDC), and the interrupt
handlers are supposed to have completed when the synchronize_irq()
emulation routine returns -- they aren't supposed to be in the middle
of a completion callback. If this happens it can lead to a gadget
driver's unbind routine running before all outstanding request
completions have finished, maybe even allowing the gadget driver's
module to be unloaded while a completion handler is still running.
Fix the oversight by incrementing the callback_usage value across
request completion callbacks. |
