| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| libIEC61850 is an open-source implementation of IEC 61850 client and server protocols including MMS, GOOSE, Sampled Values, and R-Session. Prior to 1.6.2, the MMS file service in src/mms/iso_mms/server/mms_file_service.c accepts an out-of-range initialPosition in fileOpen and stores it in the file-read state. The fileRead path then subtracts the larger read position from the file size using unsigned arithmetic and fails to limit the response to the actual FileSystem_readFile return value. The oversized response can include stale bytes from the reused connection buffer after the requested file contents, disclosing prior response data and protocol fragments to an unauthenticated remote client when the file service is enabled. This issue is fixed in version 1.6.2. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm6: fix uninitialized saddr in xfrm6_get_saddr()
xfrm6_get_saddr() does not check the return value of
ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable
source address (returns -EADDRNOTAVAIL), saddr->in6 is left
uninitialized, but xfrm6_get_saddr() still returns 0 (success).
This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized
address in xfrm_state_find(), triggering KMSAN warning:
=====================================================
BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940
xfrm_state_find+0x2424/0xa940
xfrm_resolve_and_create_bundle+0x906/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
xfrm_lookup_route+0x63/0x2b0
ip_route_output_flow+0x1ce/0x270
udp_sendmsg+0x2ce1/0x3400
inet_sendmsg+0x1ef/0x2a0
__sock_sendmsg+0x278/0x3d0
__sys_sendto+0x593/0x720
__x64_sys_sendto+0x130/0x200
x64_sys_call+0x332b/0x3e70
do_syscall_64+0xd3/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable tmp.i.i created at:
xfrm_resolve_and_create_bundle+0x3e3/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
=====================================================
Fix by checking the return value of ipv6_dev_get_saddr() and propagating
the error. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: reject undecryptable rxkad response tickets
rxkad_decrypt_ticket() decrypts the RXKAD response ticket and then
parses the buffer as plaintext without checking whether
crypto_skcipher_decrypt() succeeded.
A malformed RESPONSE can therefore use a non-block-aligned ticket
length, make the decrypt operation fail, and still drive the ticket
parser with attacker-controlled bytes.
Check the decrypt result and abort the connection with RXKADBADTICKET
when ticket decryption fails. |
| libIEC61850 is an open-source implementation of IEC 61850 client and server protocols including MMS, GOOSE, Sampled Values, and R-Session. Prior to 1.6.2, alternateArrayAccess in src/mms/iso_mms/server/mms_read_service.c does not validate an alternate-access sub-array range when numberOfElements is greater than zero. An out-of-range MmsValue_getElement call returns NULL, and the sub-array branch passes that value to MmsValue_isDeletable, causing a NULL pointer dereference. A remote MMS Read request can therefore crash servers whose data models contain arrays, while the single-element error path handles the same invalid index safely. This issue is fixed in version 1.6.2. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: check if root is readonly when setting posix acl
For a filesystem which has btrfs read-only property set to true, all
write operations including acl and xattr should be denied. However, acl
can still be set even if btrfs ro property is true.
This happens because no function on the set_acl code path checks the root
is readonly or not. It was checked in btrfs_setxattr_trans() but got
removed in commit 353c2ea735e4 ("btrfs: remove redundant readonly root
check in btrfs_setxattr_trans")
That commit didn't check if all the callers properly check the root's
read-only flag. A previous fix is commit b51111271b03 ("btrfs: check if
root is readonly while setting security xattr").
Always check if the root is read-only before performing the set acl
operation. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix error return when vfs_mkdir() fails
When vfs_mkdir() fails, the error code is not extracted from the
returned error pointer. This causes mkdir_error to be reached with
ret=0, which leads to returning ERR_PTR(0) (NULL) instead of a
proper error pointer.
Fix this by extracting the error code from the error pointer when
vfs_mkdir() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Check the error for index mapping
The ctxfi driver blindly assumed a proper value returned from
daio_device_index(), but it's not always true. Add a proper error
check to deal with the error from the function. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: undo netns switch if renaming the wiphy fails
Once all the interfaces have been moved, cfg80211_switch_netns()
moves the wiphy itself by setting its network namespace and then
renaming it, which makes sysfs move it. The rename can fail (but
only on allocation failures), leaving things mixed up and hitting
the warning there.
Ignoring it isn't great, undo the move and let the change fail
in this case. If undo fails then WARN, then things would again
be stuck in two different network namespaces. |
| In the Linux kernel, the following vulnerability has been resolved:
block: don't revert iter for -EIOCBQUEUED
blkdev_read_iter() has a few odd checks, like gating the position and
count adjustment on whether or not the result is bigger-than-or-equal to
zero (where bigger than makes more sense), and not checking the return
value of blkdev_direct_IO() before doing an iov_iter_revert(). The
latter can lead to attempting to revert with a negative value, which
when passed to iov_iter_revert() as an unsigned value will lead to
throwing a WARN_ON() because unroll is bigger than MAX_RW_COUNT.
Be sane and don't revert for -EIOCBQUEUED, like what is done in other
spots. |
| A flaw was found in Python, specifically in the FTP (File Transfer Protocol) client library in PASV (passive) mode. The issue is how the FTP client trusts the host from the PASV response by default. This flaw allows an attacker to set up a malicious FTP server that can trick FTP clients into connecting back to a given IP address and port. This vulnerability could lead to FTP client scanning ports, which otherwise would not have been possible. |
| A flaw was found in glibc. The realpath() function can mistakenly return an unexpected value, potentially leading to information leakage and disclosure of sensitive data. |
| Libreswan has a null pointer dereference bug in the PKCS#7 handling code for IKE certificate authentication. When libreswan decodes an IKE CERT payload of type CERT_PKCS7_WRAPPED_X509, it guards the PKCS#7 blob with SEC_PKCS7ContainsCertsOrCrls() and then iterates the certificate list with SEC_PKCS7GetCertificateList(). The two NSS APIs disagree on a SignedData that carries a CRL but no certificates: ContainsCertsOrCrls() returns PR_TRUE (there is a CRL), so the guard passes, but GetCertificateList() returns NULL (there are no certificates). This causes libreswan to dereference a null pointer leading to a crash and restart. A malicious IKE_AUTH packet can trigger this bug, meaning the peer does not need to be authenticated. No remote code execution is possible. Continued exploitation can cause a denial of service. |
| The BSON encoder in the MongoDB PHP Driver does not check some return values after a document exceeds libbson's size limit. This can leave the encoder in an invalid state. An unauthenticated actor who can cause an affected application to encode an unusually large data structure can terminate the PHP worker or cause the resulting document to omit fields. No MongoDB server connection or database authentication is required. |
| RIOT is an open-source microcontroller operating system designed for Internet of Things devices and other embedded systems. From version 2023.07 through version 2026.07, nanocoap_fileserver callers in sys/net/application_layer/nanocoap/fileserver.c ignore a failure returned by _resp_init() when coap_build_reply() cannot fit a response header into the response buffer. A remote client can send a CoAP request with a sufficiently large extended token when nanocoap_token_ext is enabled, causing response initialization to fail while _get_file() or _get_directory() continues with stale response state. The path then reaches _calc_szx2() and its pdu->payload_len > reserve assertion, terminating the affected service or device task. No fixed release is available as of this review. |
| Crux Agent from 1.9.0 before 2.0.3 uses the full SKA bilocation key as the WireGuard preshared key. When a peering session negotiates use of SHA-512, the key produced is 64 bytes instead of the 32 bytes WireGuard requires. The agent does not validate this size; instead it attempts to use the `wg set` command to update the live tunnel, and write the invalid key to the WireGuard configuration file. The update fails, so the live tunnel keeps using its previous preshared key until the tunnel is shut down. The tunnel will fail to start when restarted.
For a peer which has never successfully negotiated a 32-byte bilocation key in a Crux C2 organization which has the "Enforce SKA Use" setting turned off, no preshared key will be set for the tunnel. Therefore, an attacker who is able to intercept and store the peer's traffic, and has access (or will have access) to a cryptographically relevant quantum computer, will be able to decrypt the tunnel. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: Fix v9fs_issue_write() to update i_size and remote_i_size
Fix v9fs_issue_write() to update i_size and remote_i_size to the new size
of the server file if we made it larger, using the start fpos and the count
returned by p9_client_write() to calculate the new minimum file size.
This assumes that if the 9P server makes a short write (say it hits
ENOSPC), a reduced count is returned. |
| An exploitable denial-of-service vulnerability exists in the message-parsing functionality of Videolabs libmicrodns 0.1.0. When parsing mDNS messages in mdns_recv, the return value of the mdns_read_header function is not checked, leading to an uninitialized variable usage that eventually results in a null pointer dereference, leading to service crash. An attacker can send a series of mDNS messages to trigger this vulnerability. |
| In libarchive before 3.6.2, the software does not check for an error after calling calloc function that can return with a NULL pointer if the function fails, which leads to a resultant NULL pointer dereference. NOTE: the discoverer cites this CWE-476 remark but third parties dispute the code-execution impact: "In rare circumstances, when NULL is equivalent to the 0x0 memory address and privileged code can access it, then writing or reading memory is possible, which may lead to code execution." |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: leave HasEA flag untouched on setxattr failure
In ntfs_set_ea(), the exit path unconditionally updates the HasEA
flag based on ea_info_qsize. When an error occurs before
ea_info_qsize is updated, NInoClearHasEA() hides existing on-disk
EAs until the inode is evicted.
Only update the flag on success. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 4.3.3, 4.2.9, 4.1.14, 4.0.23, and 3.13.18, JWKS Fetch Ignores HTTP Response Status Code - Signing Key Destruction Causes Authentication DoS (CWE-252). the JWKS key fetching mechanism in uaajwt.erl does not validate the HTTP response status code when downloading signing keys from the OAuth2 provider's JWKS endpoint. Non-200 responses (including 4xx and 5xx errors) are processed identically to successful responses. When the JWKS endpoint returns an error response with a valid-JSON body that lacks a keys field, all previously cached signing keys are destroyed, causing a persistent authentication denial of Files: deps/rabbitmqauthbackendoauth2/src/uaajwt.erl, lines 50-63 deps/rabbitmqauthbackendoauth2/src/uaajwks.erl, lines 5-7 deps/rabbitmqauthbackendoauth2/src/rabbitoauth2provider.erl, lines 98-107 Bug 1: HTTP status code ignored (uaajwt.erl:50-63): The Erlang httpc module returns {ok, {{HttpVersion, StatusCode, ReasonPhrase}, Headers, Body}}. The pattern {ok, {, , JwksBody}} matches ANY successful HTTP transaction Persistent authentication DoS: Once keys are destroyed, ALL OAuth2/JWT authentication fails for all users until a new successful JWKS refresh occurs Amplification: A single attacker can deny access to all legitimate OAuth2 users across the entire RabbitMQ. This issue is fixed in versions 4.3.3, 4.2.9, 4.1.14, 4.0.23, and 3.13.18. |
