| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ExtUtils::Typemaps::STL::Vector versions before 1.05 for Perl allocate a 32 GiB array on an empty list.
The OUTPUT typemaps call av_extend( av, len-1 ). On an empty list, this undeflows, and av_extend will allocate an array with 2^32 slots, leading to memory exhaustion. |
| Integer underflow (wrap or wraparound) in Microsoft Bluetooth Driver allows an authorized attacker to elevate privileges over an adjacent network. |
| `_nx_secure_x509_parse_signature_data` computes the certificate signature's length as `tlv_length - 1` without first checking that `tlv_length` is non-zero. A certificate whose signature is an empty ASN.1 BIT STRING therefore parses successfully and leaves the certificate holding a signature length of `0xFFFFFFFF` and a signature pointer one byte past the end of the buffer. Certificates are parsed from the peer during the TLS handshake, so the input is remote and unauthenticated. |
| Remote Code Execution in Windows Routing and Remote Access Service (RRAS) allows attacker to gain an unauthorized access to victim's machine |
| Integer underflow (wrap or wraparound) in Windows WLAN Service allows an unauthorized attacker to deny service over a network. |
| Integer underflow (wrap or wraparound) in Windows NTFS allows an authorized attacker to disclose information locally. |
| An Integer Underflow vulnerability in the kernel of Juniper Networks Junos OS with Extended Echo configured allows an unauthenticated, network-based attacker to cause a denial of service by a kernel crash. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: xdr_buf_trim: clamp buf->len to avoid underflow
xdr_buf_trim() trims `len` bytes from the tail of an xdr_buf by
walking the tail, pages, and head iovecs. Each per-section step
uses min_t() so it never removes more bytes than that section
holds, but the final accounting at the fix_len label subtracts the
total bytes actually consumed from buf->len without any clamp:
fix_len:
buf->len -= (len - trim);
When the caller has set buf->len to a value smaller than the sum
of the iov_lens, (len - trim) can exceed buf->len and the unsigned
subtraction wraps to near UINT_MAX. gss_krb5_unwrap_v2() reaches
xdr_buf_trim() in exactly that state:
buf->head[0].iov_len -= GSS_KRB5_TOK_HDR_LEN + headskip;
buf->len = len - (GSS_KRB5_TOK_HDR_LEN + headskip);
xdr_buf_trim(buf, ec + GSS_KRB5_TOK_HDR_LEN + tailskip);
buf->len is a small wire-derived value while the iov_lens are at
page scale, so the per-section loops legitimately consume far more
bytes than buf->len records. The wrapped buf->len then propagates
as the authoritative stream bound into every downstream XDR
decoder.
Fix by clamping the decrement so buf->len bottoms out at zero:
buf->len -= min_t(unsigned int, buf->len, len - trim);
On the normal path where the iov_lens sum to buf->len, (len - trim)
is always <= buf->len and the result is identical to before. No
callers change behavior outside the underflow case. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Fix offset arithmetic in read_chunk_range
svc_rdma_read_chunk_range() walks a Read chunk's segment list to
build a sub-range starting at byte offset and spanning length bytes
for a Position-Zero or Call chunk. Two arithmetic defects in the
per-segment loop produce wrong DMA lengths and a u32 underflow:
pcl_for_each_segment(segment, chunk) {
if (offset > segment->rs_length) {
offset -= segment->rs_length;
continue;
}
dummy.rs_handle = segment->rs_handle;
dummy.rs_length = min_t(u32, length,
segment->rs_length) - offset;
dummy.rs_offset = segment->rs_offset + offset;
First, the skip predicate uses '>' instead of '>='. When offset
equals the segment's full rs_length, the segment is fully consumed
and should be skipped, but the loop falls through into the body.
The resulting dummy.rs_length is min_t(u32, length, rs_length) -
rs_length, which underflows to a near-UINT_MAX u32 when length is
smaller than rs_length, or is zero otherwise.
Second, the length formula subtracts offset from the min_t() result
rather than from segment->rs_length before the cap. For offset > 0
the segment's residual is rs_length - offset, not rs_length, so the
cap must be applied to the residual. With the current bracketing,
whenever length is smaller than rs_length - offset the per-segment
length becomes length - offset instead of length, silently dropping
offset bytes from the rebuilt chunk. Combined with the boundary
case above it also enables the u32 underflow path, which propagates
a huge nr_bvec into svc_rdma_build_read_segment() and a multi-MiB
kmalloc_array_node() in svc_rdma_get_rw_ctxt().
Additionally, svc_rdma_read_call_chunk() can invoke this function
with length == 0 when the last Read chunk ends exactly at the end
of the Call chunk. With the corrected >= predicate, every segment
is skipped and the function returns the initial -EINVAL, rejecting
a valid request. Return success immediately when length is zero.
Also break out of the loop once length is fully consumed to avoid
passing zero-length segments to svc_rdma_build_read_segment().
Fix by using '>=' so a fully-consumed segment is skipped, by
moving '- offset' inside min_t() so the cap is applied to the
segment's residual length, by returning success for zero-length
requests, and by stopping iteration when the requested range has
been consumed. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix stream->outcnt underflow on duplicate RECONF responses
A cached RECONF chunk may contain more than one request parameter. A
duplicate response can therefore find and process the same ADD_OUT request
again while another parameter is still outstanding, rolling back outcnt
twice and possibly underflowing it.
Track outstanding request types as bits and clear each bit after its first
response. Later responses for the same request are then ignored. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix TFO max_qlen accounting across reuseport migration
A listener's TCP_FASTOPEN max_qlen stops being accurate and lets through
far more pending Fast Open requests than it was configured for.
This only shows up with SO_REUSEPORT listener migration, where closing a
listener hands its still-pending TFO children over to a surviving one.
fastopenq.qlen is charged in tcp_fastopen_create_child() when the child
is created and uncharged in reqsk_fastopen_remove() when the handshake
completes. The uncharge follows rsk_listener of the request the child
points at, and inet_reqsk_clone() has repointed the child at a new
request owned by the new listener, so the ++ and the -- land on two
different sockets. The new listener's qlen drifts negative and its
limit no longer binds.
Charge the new listener during migration, like reqsk_queue_migrated()
already does for queue->young and queue->qlen. |
| ExtUtils::Typemaps::STL::List versions before 1.07 for Perl allocate a 32 GiB array on an empty list.
The OUTPUT typemaps call av_extend( av, len-1 ). On an empty list, this undeflows, and av_extend will allocate an array with 2^32 slots, leading to memory exhaustion.
Note that a similar issue was fixed in ExtUtils::Typemaps::STL::Vector version 1.05. |
| Integer underflow (wrap or wraparound) in Network Policy Server (NPS) allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: prevent snt_unacked underflow on CONN_ACK
tipc_sk_conn_proto_rcv() subtracts the peer-supplied connection ack count
from the unsigned 16-bit send counter snt_unacked without checking that it
does not exceed the number of messages actually outstanding:
tsk->snt_unacked -= msg_conn_ack(hdr);
msg_conn_ack() is read straight from a received CONN_MANAGER/CONN_ACK
message. If the ack count is larger than snt_unacked, the subtraction
wraps to a near-maximum value, leaving tsk_conn_cong() permanently true
and starving the connection of further transmits.
Validate the ACK count at the start of the CONN_ACK block and drop the
message if it acknowledges more messages than are outstanding. A peer (or,
for a local connection, the connected peer socket) can otherwise wedge a
TIPC connection's send side by sending an oversized connection ack. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: fix integer underflow in jbd2_journal_initialize_fast_commit()
jbd2_journal_initialize_fast_commit() validates journal capacity by
checking (journal->j_last - num_fc_blks < JBD2_MIN_JOURNAL_BLOCKS).
Both j_last and num_fc_blks are unsigned, so when num_fc_blks exceeds
j_last the subtraction wraps to a large value, bypassing the bounds
check.
The resulting underflow corrupts j_last, j_fc_first, and j_free,
leading to journal abort.
Fix by checking num_fc_blks against j_last before the subtraction,
returning -EFSCORRUPTED. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix hugetlb cgroup rsvd charge/uncharge mismatch
In alloc_hugetlb_folio(), a single h_cg pointer is used for both the rsvd
and non-rsvd hugetlb cgroup charges. When map_chg is set,
hugetlb_cgroup_charge_cgroup_rsvd() stores the charged cgroup in h_cg, but
the immediately following hugetlb_cgroup_charge_cgroup() overwrites h_cg
with the non-rsvd cgroup pointer.
As a result, hugetlb_cgroup_commit_charge_rsvd() stores the wrong
(non-rsvd) cgroup pointer into the folio's rsvd slot.
When the folio is later freed, free_huge_folio() unconditionally calls
both hugetlb_cgroup_uncharge_folio() and
hugetlb_cgroup_uncharge_folio_rsvd(). The rsvd uncharge reads back the
wrong cgroup from the folio and decrements a counter that was never
charged for that cgroup, causing a page_counter underflow:
page_counter underflow: -512 nr_pages=512
WARNING: mm/page_counter.c:61 at page_counter_cancel
Fix this by introducing a separate h_cg_rsvd pointer exclusively for the
rsvd charge path, keeping the rsvd and non-rsvd charges fully independent
through their charge, commit, and error uncharge paths. |
| libIEC61850 is an open-source implementation of IEC 61850 client and server protocols including MMS, GOOSE, Sampled Values, and R-Session. Prior to 1.6.2, the MMS file service in src/mms/iso_mms/server/mms_file_service.c accepts an out-of-range initialPosition in fileOpen and stores it in the file-read state. The fileRead path then subtracts the larger read position from the file size using unsigned arithmetic and fails to limit the response to the actual FileSystem_readFile return value. The oversized response can include stale bytes from the reused connection buffer after the requested file contents, disclosing prior response data and protocol fragments to an unauthenticated remote client when the file service is enabled. This issue is fixed in version 1.6.2. |
| RIOT is an open-source microcontroller operating system designed for Internet of Things devices and other embedded systems. Prior to 2026.07, _parse_reply() in sys/net/application_layer/dhcpv6/client.c omits minimum-length validation before passing IA_PD and IA_NA option bodies to sub-option parsers. A malicious or compromised DHCPv6 server can send a REPLY with an option length smaller than the required structure while MODULE_DHCPV6_CLIENT_IA_PD is enabled, causing _parse_ia_pd_option to read past the option body, size_t underflow, and unbounded out-of-bounds heap reads that can crash the device and may expose or corrupt memory. This issue is fixed in version 2026.07. |
| Integer underflow (wrap or wraparound) in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix eswitch mode block underflow on IPsec acquire SA
mlx5e_xfrm_add_state() handles acquire-flow temporary SAs by allocating
software state and skipping hardware offload setup.
That path jumps to the common success label before taking the eswitch mode
block. After tunnel-mode validation was moved earlier, the common success
label unconditionally calls mlx5_eswitch_unblock_mode(). For acquire SAs,
this decrements esw->offloads.num_block_mode without a matching increment.
Return directly after installing the acquire SA offload handle, so only the
paths that successfully called mlx5_eswitch_block_mode() call the matching
unblock. |
