| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.24, 4.1.15, 4.2.10, and 4.3.4, the optimized AMQP 1.0 server_mode parser in deps/amqp10_common/src/amqp10_binary_parser.erl matches the textual prefixes of symbolic data, sequence, and value body descriptors without verifying their encoded symbol lengths. An authenticated AMQP 1.0 publisher with write permission can submit a well-formed unknown descriptor that begins with a registered body descriptor, and RabbitMQ misclassifies and stores the bytes as a standard body section. Strict AMQP 1.0 consumers can terminate while decoding the stored entry. For bodies misclassified as data, AMQP 0-9-1 or other cross-protocol conversion performs full body decoding and can terminate the consumer protocol process, with acknowledgement-required delivery permitting repeated failures. Sequence and value classifications are normally transported as opaque encoded payloads on that conversion path. The broker remains alive, and the issue does not bypass routing or authorization. This issue is fixed in versions 4.0.24, 4.1.15, 4.2.10, and 4.3.4. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.24, 4.1.15, 4.2.10, and 4.3.4, deps/amqp10_common/src/amqp10_binary_parser.erl materializes each element of AMQP 1.0 arrays whose shared constructor has zero width, while limiting only the number of elements in each array and not the aggregate arrays in a frame. After completing SASL authentication, a low-privilege client can send an ordinary frame containing many individually permitted arrays, causing a small frame to expand into a very large reader-process heap before later frame validation or authorization. Because deps/rabbit/src/rabbit_amqp_reader.erl clears the pre-authentication max_heap_size guard after login, repeated or concurrent frames can trigger the node-wide memory alarm, block publishers, or exhaust broker memory. This issue is fixed in versions 4.0.24, 4.1.15, 4.2.10, and 4.3.4. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5, the MQTT 5 parser in deps/rabbitmq_mqtt/src/rabbit_mqtt_packet.erl accepts Request-Problem-Information on PUBLISH packets even though the property is valid only for CONNECT. An authenticated publisher with topic write permission can cause the broker to store and route that inapplicable property to a separately authenticated matching subscriber. When the subscriber path serializes the outbound PUBLISH, serialise_prop/2 has no matching clause, and the uncontained function_clause exception closes the victim MQTT or Web MQTT connection. The publisher connection and broker remain available, and queued replay, retained-message persistence, and broker-wide denial of service were not established. This issue is fixed in versions 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.18 and 4.0.23 and 4.1.14 and 4.2.9 and 4.3.3, Stored XSS via TLS peer-certificate DN in stream-management UI (sibling of V-11). lines 102/106/110 render peercertsubject / peercertissuer with raw <%= %> and no fmtstring(). RFC4514 backslash-escaping of </> is HTML-inert and bypassable (<img ... //>). Requires non-default config: a stream TLS listener with verifypeer and an attacker-obtainable trusted cert with a malicious Same as the connection.ejs finding, against operators viewing the stream-connection detail rabbitmqstream + rabbitmqstreammanagement enabled with a TLS listener using verifypeer Attacker can obtain a certificate signed by a CA the listener trusts, with attacker-chosen DN An operator views the. This issue is fixed in versions 3.13.18 and 4.0.23 and 4.1.14 and 4.2.9 and 4.3.3. |
| RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.9 and 4.3.3, AMQP 1.0 management exchange.declare skips alternate-exchange permission check. pUT /exchanges/:name (lines 192-240) checks only configure on the declared exchange and passes XArgs straight to rabbitexchange:declare/7. It omits the checkreadpermitted(X) + checkwritepermitted(AE) that rabbitchannel.erl:2540-2548 enforces for the alternate-exchange argument on the AMQP 0-9-1 path. The same file already implements the analogous DLX check for queues (lines 708-719), confirming this is a missing-check bug rather than intentional A user with only configure on exchange X can route X's unroutable messages into an alternate exchange they have no write permission AMQP 1.0 enabled (default in RabbitMQ 4.x) Attacker has configure on at least one exchange but lacks write on the target. This issue is fixed in versions 4.2.9 and 4.3.3. |
| RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.9 and 4.3.3, OAuth2 isinteger(Exp) guard skips token-expiry checks for float exp. validatetokenexpiry/1 (lines 208-214) and expirytimestamp/1 (138-144) both guard with 'when isinteger(Exp)' and fall through to ok/never for float values. josejwt:verify validates only the signature, not exp. With float exp, no expiry validation occurs anywhere in the If the IdP emits exp as a JSON float (RFC 7519 permits fractional NumericDate), both the login-time expiry check and the mid-connection disconnect timer are silently skipped , an already-expired token is accepted, and connections never time OAuth2 backend enabled IdP emits float exp (uncommon; mainstream IdPs emit integers) Attacker possesses a previously-valid signed. This issue is fixed in versions 4.2.9 and 4.3.3. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.3.3, 4.2.9, 4.1.14, and 4.0.23, Shovel does not format state logged by the crash reporter and can leave unencrypted credentials in a crash dump file. the shovel worker genserver processes does not implement the formatstatus/2 callback. When these processes crash (e.g., due to network partitions, connection failures), the OTP SASL error handler writes the full process state , including plaintext AMQP passwords and URIs , to the error log. This is particularly severe for the shovel worker, which stores deobfuscated plaintext URIs (including amqp://user:password@host format) in its genserver state for the entire process Automatic Credential Exposure: Shovel worker crashes (common during network partitions) automatically write plaintext upstream/downstream passwords to error logs No Special Configuration Needed: Unlike DEBUG logging, SASL error reports are always active Broad. This issue is fixed in versions 4.3.3, 4.2.9, 4.1.14, and 4.0.23. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.3.3 and 4.2.9 and 4.1.14 and 4.0.23, Incomplete fix for CVE-2026-44838: escaperegexchar/1 does not escape -, leaving room for an MQTT topic permission bypass. the CVE-2026-44838 fix made expandtopicpermission/2 escape regex metacharacters in expanded topic-permission variables (escaperegex(V)), but escaperegexchar/1 escapes \ ^ $ . | ? + ( ) [ ] { } and omits -. When a topic permission template places {clientid} inside a [...] character class A low-privileged authenticated MQTT user controlling its clientid can broaden topic authorization (read and write) when templates embed {clientid} in a [...] This issue is fixed in versions 4.3.3 and 4.2.9 and 4.1.14 and 4.0.23. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.23, 4.1.14, 4.2.9, and 4.3.3, the optional rabbitmq_jms_topic_exchange plugin's x-jms-topic exchange accepted a client-controlled rjms_erlang_selector binding expression whose LIKE evaluator expanded percent and underscore wildcards into overlapping PCRE fragments. It executed those fragments with raw re:run/3 without match or recursion limits, allowing an authenticated tenant that can bind and publish to consume broker scheduler CPU and deny service with pathological selectors. This issue is fixed in versions 4.0.23, 4.1.14, 4.2.9, and 4.3.3. |
| RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.9 and 4.3.3, the Shovel parameter parser converted attacker-controlled runtime parameter values into non-garbage-collected Erlang atoms before bounding them or checking a fixed allowlist. Exploitation requires network access to the Management HTTP API, valid credentials with both the management and policymaker tags, permission to set Shovel runtime parameters on a vhost, and the rabbitmq_shovel and rabbitmq_shovel_management plugins to be enabled. The attacker can exhaust the node-wide atom table and deny service, and malicious parameters are stored durably and reparsed when workers start, so atom pressure can recur after restart without a live attacker connection. This issue is fixed in versions 4.2.9 and 4.3.3. |
| RabbitMQ is a messaging and streaming broker. Prior to 4.3.5, an authenticated user who can bind a queue to a topic exchange and publish to it can use consecutive # segments in a binding key to make both topic matchers revisit the same trie-node and routing-key-suffix states without memoization. The matcher materializes duplicate destinations before deduplication, causing combinatorial CPU work and memory pressure that can disrupt routing for all tenants. This vulnerability is fixed in 4.3.5. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5, RabbitMQ OAuth credential refresh retains revoked runtime tags. when an existing AMQP connection refreshes from an OAuth token that grants the impersonator tag to a valid same-username token that no longer grants that tag, RabbitMQ updates the OAuth backend implementation (token/scopes/expiry) but leaves the connection's runtime #user.tags unchanged. rabbitaccesscontrol:checkuserid/2 then still honors the stale impersonator tag, so the connection (including newly opened channels) can continue publishing messages with a foreign AMQP userid after that privilege should have been revoked. A fresh connection using the downgraded token correctly refuses the same publish, proving the defect is stale session state rather than the token Limited to connections that once held impersonator and successfully refresh to a downgraded same-username rabbitauthbackendoauth2 (or an equivalent refresh-capable backend that returns tags) is enabled for This issue is fixed in versions 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5. |
| RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.8 and 4.3.2, a successful POST /login caused is_authorized/2 to set an auth cookie containing base64-encoded username:password credentials without HttpOnly, Secure, SameSite, or expiration protections. Because base64 is encoding rather than encryption, an attacker with same-origin cross-site scripting, an HTTP-readable network position, or local access to the browser cookie store could recover the actual login credentials; older browsers that treated an absent SameSite attribute as None also sent the cookie cross-site. This issue is fixed in versions 4.2.8 and 4.3.2. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.3.3, 4.2.9, 4.1.14, and 4.0.23, AMQP 1.0 management GET /bindings exposes full binding topology to any authenticated AMQP user without resource/management permission checks. the AMQP 1.0 HTTP-over-AMQP management endpoint GET /bindings (the rabbitamqpmanagement handler) enumerates bindings between an arbitrary source exchange and destination queue/exchange in the caller's virtual host without performing any resource-level permission check. Unlike every sibling operation in the same module (which call checkresourceaccess / bindingchecks), the GET handler ignores the authenticated User and returns the binding list unchanged. As a result, any authenticated AMQP 1.0 client that can open a management link pair , including users with no management/monitoring/policymaker/administrator tag , can enumerate the complete binding topology (source exchanges, destination queues/exchanges, routing keys, and binding arguments) of the virtual host they can access. The equivalent HTTP management API (GET /api/bindings) Confidentiality impact: a non-management AMQP 1.0 user can enumerate the complete routing topology of any virtual host it can connect to , every (source exchange, destination queue/exchange, routing key, binding arguments) This issue is fixed in versions 4.3.3, 4.2.9, 4.1.14, and 4.0.23. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15 and 4.0.22 and 4.1.11 and 4.2.6 and 4.3.1, Atom exhaustion: OAuth2 JWT tag: scope values. extractscopes/1 parses scopes of the form .tag: and calls rabbitdatacoercion:toatom() to convert to a tag atom. The token signature is verified first, so the attacker cannot forge scopes , but in IdP configurations where scope content is user-influenced, each login with a novel tag value leaks one In deployments where users can influence the scopes included in their IdP-issued JWT rabbitmqauthbackendoauth2 enabled IdP permits attacker-influenced scope values in signed tokens. This issue is fixed in versions 3.13.15 and 4.0.22 and 4.1.11 and 4.2.6 and 4.3.1. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15 and 4.0.20 and 4.1.11 and 4.2.6, protected tag bypass via bulk-delete. dELETE /api/users/:name refuses to delete users tagged protected (rabbitmgmtwmuser:deleteresource/2 checks isprotecteduser). POST /api/users/bulk-delete iterates the supplied username list and calls rabbitauthbackendinternal:deleteuser/2 directly , that function has no protected-tag check , so the guard is silently An administrator can delete protected-tagged service accounts via the bulk endpoint, bypassing a safeguard the test suite confirms is rabbitmqmanagement enabled Attacker has the administrator tag A protected-tagged user. This issue is fixed in versions 3.13.15 and 4.0.20 and 4.1.11 and 4.2.6. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15, 4.0.20, 4.1.11, and 4.2.6, mechanisms/1 applied list_to_atom/1 to every colon-delimited token in an attacker-controlled auth_mechanism value, permanently consuming Erlang VM atoms and allowing the node to be crashed with a large request. Exploitation requires the Shovel or Federation plugin to be in use, and setting auth_mechanism requires the policymaker tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. |
| RabbitMQ is a messaging and streaming broker. The advisory establishes affected 3.13, 4.0, 4.1, 4.2, and 4.3 maintenance lines but contains conflicting first-fixed versions for the 3.13, 4.0, and 4.1 lines. fill/2 substitutes ${username} into user_dn_pattern without RFC 4514 DN escaping, allowing a crafted username to alter the LDAP bind DN and potentially select a different directory entry. Exploitation requires rabbitmq_auth_backend_ldap with a user_dn_pattern containing ${username}, a directory layout in which the injected suffix resolves usefully, and a password valid for the resulting DN. The advisory body identifies 3.13.15, 4.0.20, 4.1.11, 4.2.9, and 4.3.3 as fixed, while structured metadata identifies 3.13.18, 4.0.23, 4.1.14, 4.2.9, and 4.3.3. No fixed-version assertion is certifiable until a curator resolves this conflict. |
| The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.37.0, com.rabbitmq.tools.json.JSONReader.read() fails to terminate when input ends inside a quoted string or a line comment because its string and whitespace scanners do not stop at CharacterIterator.DONE. The default DefaultJsonRpcMapper passes JSON-RPC message bodies to this parser for JsonRpcServer and client replies. A truncated string causes the parser to append replacement end markers until heap exhaustion, while a line comment without a terminating newline can keep a thread consuming CPU indefinitely, resulting in denial of service. This issue is fixed in version 5.37.0. |
| The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.36.0, ValueReader.readShortstr decodes malformed UTF-8 bytes into replacement characters that can re-encode beyond the AMQP shortstr limit enforced by ValueWriter.writeShortstr. An attacker who can submit an RPC message with a malformed echoed property can cause reply publication in RpcServer.mainloop() or tutorial-style consumers to throw an unchecked exception before acknowledgement. The broker requeues the message, allowing the same message to disable replacement consumers until the queue is purged. This issue is fixed in version 5.36.0. |
